<6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.8+ (root@forise2_linux) (gcc version 4.4.3 (GCC) ) #496 SMP PREEMPT Thu Jan 17 12:26:40 CST 2013 <4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache <4>[ 0.000000] Machine: RK30board <6>[ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <6>[ 0.000000] memory reserve: Memory(base:0x90800000 size:16M) reserved for <6>[ 0.000000] memory reserve: Memory(base:0x8f800000 size:16M) reserved for <6>[ 0.000000] memory reserve: Memory(base:0x8e800000 size:16M) reserved for <6>[ 0.000000] memory reserve: Memory(base:0x8e000000 size:8M) reserved for <6>[ 0.000000] memory reserve: Total reserved 136M <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback <6>[ 0.000000] bootconsole [earlycon0] enabled <4>[ 0.000000] CPU SRAM: copied sram code from c0b53000 to fef00100 - fef02250 <4>[ 0.000000] CPU SRAM: copied sram data from c0b55150 to fef03000 - fef0385c <6>[ 0.000000] L310 cache controller enabled <6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B <4>[ 0.000000] DDR DEBUG: version 1.00 20121016 <4>[ 0.000000] DDR DEBUG: DDR3 Device <4>[ 0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB <4>[ 0.000000] DDR DEBUG: init success!!! freq=360MHz <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180 <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180 <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180 <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180 <4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0 <4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb <4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2 <4>[ 0.000000] rk30_iomux_init <4>[ 0.000000] Boot mode: 0 flag: 0xc3524200 <7>[ 0.000000] On node 0 totalpages: 227328 <7>[ 0.000000] free_area_init_node: node 0, pgdat c0b51900, node_mem_map c15d9000 <7>[ 0.000000] Normal zone: 1744 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 186672 pages, LIFO batch:31 <7>[ 0.000000] HighMem zone: 304 pages used for memmap <7>[ 0.000000] HighMem zone: 38608 pages, LIFO batch:7 <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1de1000 s7072 r8192 d13408 u32768 <7>[ 0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225280 <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00210000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x00100000@0x00018000(backup),0x0003a000@0x00118000(cache),0x00200000@0x00152000(userdata),0x00002000@0x00352000(kpanic),0x00100000@0x00354000(system),-@0x00454000(user) bootver=2012-12-07#1.22 firmware_ver=4.1.1 <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 736MB 152MB = 888MB total <5>[ 0.000000] Memory: 879844k/879844k available, 168732k reserved, 155648K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) <5>[ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .init : 0xc0408000 - 0xc0529000 (1156 kB) <5>[ 0.000000] .text : 0xc0529000 - 0xc0aeb680 (5898 kB) <5>[ 0.000000] .data : 0xc0aec000 - 0xc0b52420 ( 410 kB) <5>[ 0.000000] .bss : 0xc0b56024 - 0xc15d8598 (10762 kB) <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:416 <4>[ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.004985] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341) <6>[ 0.013852] pid_max: default: 32768 minimum: 301 <6>[ 0.019105] Mount-cache hash table entries: 512 <6>[ 0.024614] Initializing cgroup subsys debug <6>[ 0.029239] Initializing cgroup subsys cpuacct <6>[ 0.034120] Initializing cgroup subsys freezer <6>[ 0.039014] CPU: Testing write buffer coherency: ok <4>[ 0.144987] CPU1: Booted secondary processor <6>[ 0.145028] Brought up 2 CPUs <6>[ 0.152928] SMP: Total of 2 processors activated (3262.93 BogoMIPS). <6>[ 0.160147] devtmpfs: initialized <6>[ 0.171309] NET: Registered protocol family 16 <4>[ 0.176269] last_log: 0xed900000 0xc0b5a2a0 <4>[ 0.182670] ft5xx6_init_platform_hw_ff <6>[ 0.594962] rk29sdk_wifi_bt_gpio_control_init: init finished <6>[ 0.718879] console [ttyFIQ0] enabled, bootconsole disabled <6>[ 0.725056] Registered FIQ tty driver ed88fc00 <6>[ 0.737538] bio: create slab at 0 <4>[ 0.741755] wm831x_dcdc_init <4>[ 0.741937] wm831x_ldo_init <5>[ 0.742290] SCSI subsystem initialized <6>[ 0.742482] usbcore: registered new interface driver usbfs <6>[ 0.742554] usbcore: registered new interface driver hub <6>[ 0.744792] usbcore: registered new device driver usb <3>[ 0.745045] i2c i2c-0: 1 i2c clients have been registered at 0x4c <6>[ 0.745189] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter <6>[ 0.745416] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter <6>[ 0.745680] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter <6>[ 0.745790] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter <6>[ 0.745919] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter <6>[ 0.799745] rk30-adc rk30-adc: rk30 adc: driver initialized <4>[ 0.799844] rk30_adc_battery_probe--1560: <4>[ 0.815833] xxxxxxxxxx bat->capacitytmp=37 bat->bat_voltage =3761 bat->bat_status = 3 <6>[ 0.816049] rk30_adc_battery: driver initialized <6>[ 0.816250] Advanced Linux Sound Architecture Driver Version 1.0.24. <6>[ 0.816647] Bluetooth: Core ver 2.16 <6>[ 0.816696] NET: Registered protocol family 31 <6>[ 0.816708] Bluetooth: HCI device and connection manager initialized <6>[ 0.816724] Bluetooth: HCI socket layer initialized <6>[ 0.816736] Bluetooth: L2CAP socket layer initialized <6>[ 0.816760] Bluetooth: SCO socket layer initialized <6>[ 0.816954] cfg80211: Calling CRDA to update world regulatory domain <4>[ 0.871160] rk fb probe ok! <4>[ 0.871258] wm831x_i2c_init <3>[ 0.871950] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 2... <3>[ 0.872602] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 1... <3>[ 0.873250] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 0... <3>[ 0.873269] wm831x 1-0034: Failed to read parent ID: -11 <4>[ 0.873291] wm831x: probe of 1-0034 failed with error -11 <4>[ 0.911911] tps65910_pre_init,line=38 <6>[ 0.915930] TPS65910 Set default voltage. <4>[ 0.918322] tps65910_pre_init,line=230 <4>[ 0.963285] tps65910_post_init,line=238 <4>[ 0.963298] tps65910_post_init:g_pmic_type=2 <4>[ 0.975231] tps65910_post_init set vio vcc_io=3300000mV end <4>[ 0.976471] tps65910_post_init set vpll vdd11=2500000mV end <4>[ 0.977700] tps65910_post_init set vdig2 vdd11=1100000mV end <4>[ 0.978926] tps65910_post_init set vaux33 vcc_tp=3300000mV end <4>[ 0.981790] tps65910_post_init set vdd1 vdd_cpu=1200000mV end <4>[ 0.984653] tps65910_post_init set vdd2 vcc_ddr=1200000mV end <4>[ 0.985881] tps65910_post_init set vdig1 vcc18_cif=1800000mV end <4>[ 0.987107] tps65910_post_init set vaux1 vcc25_hdmi=2500000mV end <4>[ 0.988333] tps65910_post_init set vaux2 vcca33=3300000mV end <4>[ 0.989557] tps65910_post_init set vdac vccio_wl=1800000mV end <4>[ 0.990782] tps65910_post_init set vmmc vcc28_cif=2800000mV end <4>[ 0.990896] tps65910_post_init,line=330 END <4>[ 0.990908] tps65910_i2c_probe:irq=324,irq_base=352,gpio_base=364 <6>[ 1.001117] tps65910-rtc tps65910-rtc: rtc core: registered tps65910 as rtc0 <4>[ 1.004952] tps65910_rtc_probe:ok <6>[ 1.005072] Switching to clocksource timer1 <4>[ 1.005288] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf701c000 <4>[ 1.005331] <<<<<<<<<<<<<[ 1.014450] Switched to NOHz mode on CPU #0 <6>[ 1.015019] Switched to NOHz mode on CPU #1 <4>[ 1.505868] lcdc0: dclk:66500000>>fps:51 rk30_load_screen for lcdc0 ok! <4>[ 1.534442] fb0:phy:90800000>>vir:f8000000>>len:0x1000000 <4>[ 1.534643] rk_fb_register>>>>>fb0 <4>[ 1.534789] rk_fb_register>>>>>fb1 <4>[ 1.534803] lcdc0 wakeup from stanby <6>[ 1.534812] lcdc0 win1 open <4>[ 1.561221] rk30 lcdc0 probe ok! <4>[ 1.561286] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf7028000 <4>[ 1.561361] lcdc1: dclk:74250000>>fps:60 rk30_load_screen for lcdc1 ok! <4>[ 1.561384] fb2:phy:90800000>>vir:f8000000>>len:0x1000000 <4>[ 1.561597] rk_fb_register>>>>>fb2 <4>[ 1.561750] rk_fb_register>>>>>fb3 <4>[ 1.561761] rk30 lcdc1 probe ok! <4>[ 1.561808] boot with tps65910 need pwm_regultor <4>[ 1.561857] pwm_regulator_probe:n_voltages=17 <4>[ 1.562000] pwm_regulator.0: driver initialized <4>[ 1.562011] rk30 pwm regulator is ok with pmu tps65910 <4>[ 1.572057] pwm_regulator_probe set vdd_core=1100000mV end <6>[ 1.578664] NET: Registered protocol family 2 <6>[ 1.578797] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 1.579131] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 1.580975] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) <6>[ 1.582035] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 1.582048] TCP reno registered <6>[ 1.582062] UDP hash table entries: 512 (order: 2, 16384 bytes) <6>[ 1.582102] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) <6>[ 1.582441] NET: Registered protocol family 1 <4>[ 1.582628] RK29 Backlight Driver Initialized.<<<<<<<<[ 1.582822] Unpacking initramfs... <6>[ 1.696998] Freeing initrd memory: 2112K <6>[ 1.697194] rk30-tsadc rk30-tsadc: initialized <6>[ 1.699193] Loaded driver for PL330 DMAC-1 rk29-pl330 <6>[ 1.699211] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 <6>[ 1.699355] Loaded driver for PL330 DMAC-2 rk29-pl330 <6>[ 1.699369] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14 <4>[ 1.705866] highmem bounce pool size: 64 pages <6>[ 1.706045] ashmem: initialized <6>[ 1.711021] fuse init (API version 7.16) <6>[ 1.712444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) <6>[ 1.712462] io scheduler noop registered <6>[ 1.712472] io scheduler deadline registered <6>[ 1.712527] io scheduler cfq registered (default) <6>[ 1.718630] rga: Driver loaded succesfully <6>[ 1.719321] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0 <6>[ 1.765136] rk_serial rk_serial.0: membase 0xf704c000 <6>[ 1.765199] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3 <6>[ 1.875206] rk_serial rk_serial.3: membase 0xf7050000 <6>[ 1.876075] Rockchip ion module(version: 1.0) is successfully loaded <6>[ 1.884182] loop: module loaded <6>[ 1.884483] Android kernel panic handler initialized (bind=kpanic) <6>[ 1.886735] PPP generic driver version 2.4.2 <6>[ 1.887246] PPP Deflate Compression module registered <6>[ 1.887287] PPP BSD Compression module registered <6>[ 1.888927] PPP MPPE Compression module registered <6>[ 1.888973] NET: Registered protocol family 24 <6>[ 1.889176] usbcore: registered new interface driver asix <6>[ 1.889336] usbcore: registered new interface driver cdc_ether <6>[ 1.889528] usbcore: registered new interface driver dm9620 <6>[ 1.889682] usbcore: registered new interface driver SR9700_android <6>[ 1.889836] usbcore: registered new interface driver net1080 <6>[ 1.889975] usbcore: registered new interface driver cdc_subset <6>[ 1.890114] usbcore: registered new interface driver zaurus <6>[ 1.890182] cdc_ncm: 04-Aug-2011 <6>[ 1.890315] usbcore: registered new interface driver cdc_ncm <4>[ 1.890351] Rockchip WiFi SYS interface (V1.00) ... <6>[ 1.890467] Initializing USB Mass Storage driver... <6>[ 1.890646] usbcore: registered new interface driver usb-storage <6>[ 1.890683] USB Mass Storage support registered. <6>[ 1.891013] usbcore: registered new interface driver usbserial <6>[ 1.891145] USB Serial support registered for generic <6>[ 1.891328] usbcore: registered new interface driver usbserial_generic <6>[ 1.891367] usbserial: USB Serial Driver core <6>[ 1.891488] USB Serial support registered for GSM modem (1-port) <6>[ 1.891652] usbcore: registered new interface driver option <6>[ 1.891687] option: v0.7.2:USB Driver for GSM modems <6>[ 1.891806] USB Serial support registered for pl2303 <6>[ 1.892005] usbcore: registered new interface driver pl2303 <6>[ 1.892043] pl2303: Prolific PL2303 USB to serial adaptor driver <6>[ 2.105223] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode <6>[ 2.105242] usb20_otg usb20_otg: DWC OTG Controller <6>[ 2.105263] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1 <6>[ 2.105289] usb20_otg usb20_otg: irq 48, io mem 0x00000000 <6>[ 2.105296] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest <6>[ 2.105336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 2.105346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 2.105355] usb usb1: Product: DWC OTG Controller <6>[ 2.105362] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd <6>[ 2.105369] usb usb1: SerialNumber: usb20_otg <6>[ 2.105627] hub 1-0:1.0: USB hub found <6>[ 2.105641] hub 1-0:1.0: 1 port detected <6>[ 2.106152] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7100000 <6>[ 2.316432] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode <6>[ 2.316454] usb20_host usb20_host: DWC OTG Controller <6>[ 2.316473] usb20_host usb20_host: new USB bus registered, assigned bus number 2 <6>[ 2.316495] usb20_host usb20_host: irq 49, io mem 0x00000000 <6>[ 2.316532] DWC_OTG: Init: Port Power? op_state=1 <6>[ 2.316538] DWC_OTG: Init: Power Port (0) <6>[ 2.316570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 2.316580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 2.316588] usb usb2: Product: DWC OTG Controller <6>[ 2.316594] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd <6>[ 2.316601] usb usb2: SerialNumber: usb20_host <6>[ 2.316835] hub 2-0:1.0: USB hub found <6>[ 2.316848] hub 2-0:1.0: 1 port detected <6>[ 2.317874] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 2.317885] android_usb gadget: Number of LUNs=2 <6>[ 2.317893] lun0: LUN: removable file: (no medium) <6>[ 2.317900] lun1: LUN: removable file: (no medium) <6>[ 2.318009] android_usb gadget: android_usb ready <6>[ 2.318166] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0 <4>[ 2.318330] ==ft5x0x_ts_probe= <3>[ 2.468815] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2... <3>[ 2.469067] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1... <3>[ 2.469314] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0... <4>[ 2.469323] [ft5x0x ] Device not found <4>[ 2.469336] ft5x0x_ts: probe of 2-0038 failed with error -11 <4>[ 2.469369] ==gsl_ts_init== <4>[ 2.469390] GSLX680 Enter gsl_ts_probe <4>[ 2.469407] ==kzalloc success= <4>[ 2.469412] [GSLX680] Enter gsl_ts_init_ts <6>[ 2.469576] input: gslX680 as /devices/platform/rk30_i2c.2/i2c-2/2-0040/input/input1 <6>[ 2.490262] I read reg 0xf0 is 0 <6>[ 2.501273] I write reg 0xf0 0x12 <6>[ 2.511776] I read reg 0xf0 is 0x12 <4>[ 2.521826] *******gsl1680 I2C test success <4>[ 2.575123] =============gsl_load_fw start============== <4>[ 3.185425] =============gsl_load_fw end============== <3>[ 3.415737] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2... <3>[ 3.536687] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2... <3>[ 3.538398] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2... <4>[ 3.539149] [GSLX680] End gsl_ts_probe <4>[ 3.539309] ret=0 <4>[ 3.595621] offser gain = 450 426 337 512 784 592====================== <4>[ 3.595628] <4>[ 3.595631] <6>[ 3.596034] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-004c-1/input/input2 <4>[ 3.596282] *********create mc3230_used <6>[ 3.615229] mc3230 probe ok <6>[ 3.615482] using rtc device, tps65910, for alarms <6>[ 3.615782] lirc_dev: IR Remote Control driver registered, major 250 <6>[ 3.615794] IR NEC protocol handler initialized <6>[ 3.615803] IR RC5(x) protocol handler initialized <6>[ 3.615811] IR RC6 protocol handler initialized <6>[ 3.615819] IR JVC protocol handler initialized <6>[ 3.615826] IR Sony protocol handler initialized <6>[ 3.615835] IR RC5 (streamzap) protocol handler initialized <6>[ 3.615843] IR LIRC bridge handler initialized <6>[ 3.615851] Linux video capture interface: v2.00 <6>[ 3.616410] device-mapper: uevent: version 1.0.3 <6>[ 3.616684] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com <6>[ 3.616876] Bluetooth: HCI UART driver ver 2.2 <6>[ 3.616887] Bluetooth: HCI H4 protocol initialized <6>[ 3.616896] Bluetooth: HCILL protocol initialized <6>[ 3.617045] cpuidle: using governor ladder <6>[ 3.617057] cpuidle: using governor menu <6>[ 3.622313] <6>[ 3.622316] drivers/mmc/core/core.c...1827.. ===== mmc_rescan Begin....[mmc0] <4>[ 3.622331] <4>[ 3.622333] ================= <4>[ 3.622336] mmc_rescan..1834.. ====find no SDMMC host. [mmc0] <6>[ 3.622399] .Line3931..The End of SDMMC-probe Ver.4.09 The last modify date is 2012-10-12. [sd_mmc] <6>[ 3.622537] <6>[ 3.622540] drivers/mmc/core/core.c...1827.. ===== mmc_rescan Begin....[mmc1] <4>[ 3.622554] <4>[ 3.622556] ================= <4>[ 3.622559] mmc_rescan..1834.. ====find no SDMMC host. [mmc1] <6>[ 3.622596] .Line3931..The End of SDMMC-probe Ver.4.09 The last modify date is 2012-10-12. [sdio] <7>[ 3.622723] Registered led device: button-backlight <6>[ 3.624138] usbcore: registered new interface driver usbhid <6>[ 3.624150] usbhid: USB HID core driver <6>[ 3.624467] logger: created 256K log 'log_main' <6>[ 3.624545] logger: created 256K log 'log_events' <6>[ 3.624620] logger: created 256K log 'log_radio' <6>[ 3.624709] logger: created 256K log 'log_system' <3>[ 3.750832] RT5631 0-001a: dapm: unknown pin HP_L <3>[ 3.750847] RT5631 0-001a: dapm: unknown pin HP_R <6>[ 3.772235] asoc: RT5631 HiFi <-> rk29_i2s.0 mapping ok <6>[ 3.772617] ALSA device list: <6>[ 3.772626] #0: RK29_RT5631 <6>[ 3.772717] GACT probability NOT on <6>[ 3.772730] Mirror/redirect action on <6>[ 3.772739] u32 classifier <6>[ 3.772745] Actions configured <6>[ 3.772754] Netfilter messages via NETLINK v0.30. <6>[ 3.772799] nf_conntrack version 0.5.0 (13780 buckets, 55120 max) <6>[ 3.773204] ctnetlink v0.93: registering with nfnetlink. <6>[ 3.773242] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 3.773253] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 3.773477] xt_time: kernel timezone is -0000 <6>[ 3.773616] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 3.773760] arp_tables: (C) 2002 David S. Miller <6>[ 3.773809] TCP cubic registered <6>[ 3.774280] NET: Registered protocol family 10 <6>[ 3.774925] Mobile IPv6 <6>[ 3.774957] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 3.775086] IPv6 over IPv4 tunneling driver <6>[ 3.775814] NET: Registered protocol family 17 <6>[ 3.775850] NET: Registered protocol family 15 <5>[ 3.775942] Bridge firewalling registered <6>[ 3.815224] Bluetooth: RFCOMM TTY layer initialized <6>[ 3.815244] Bluetooth: RFCOMM socket layer initialized <6>[ 3.815254] Bluetooth: RFCOMM ver 1.11 <6>[ 3.815264] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>[ 3.815274] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>[ 3.815383] NET: Registered protocol family 35 <6>[ 3.815633] [BT_RFKILL]: Enter rfkill_rk_init <6>[ 3.815722] [BT_RFKILL]: Request irq for bt wakeup host <6>[ 3.815744] [BT_RFKILL]: ** disable irq <6>[ 3.845123] [BT_RFKILL]: bt shut off power <6>[ 3.875129] [BT_RFKILL]: rk903_26M device registered. <4>[ 3.875190] mma7660 init <4>[ 3.875228] gs_mma7660: probe of 0-004c failed with error -1 <4>[ 3.875264] i2c-core: driver [gs_mma7660] using legacy suspend method <4>[ 3.875274] i2c-core: driver [gs_mma7660] using legacy resume method <4>[ 3.875290] <4>[ 3.875292] *****************sensor_mod_init..sp0838.. <4>[ 3.875334] <4>[ 3.875337] *****************sensor_mod_init..sp2518.. <6>[ 3.875552] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <3>[ 3.876354] <3>[ 3.876357] rk_camera_probe Memory(start:0x8e000000 size:0x800000) for IPP obtain <6>[ 3.876741] input: Goodix Capacitive TouchScreen as /devices/virtual/input/input3 <3>[ 3.876866] Goodix-TS 2-005d: Failed to request GPIO:306, ERRNO:-16 <3>[ 3.876884] Goodix-TS 2-005d: Failed to request GPIO:312, ERRNO:-16 <6>[ 3.876895] Goodix-TS 2-005d: Start Goodix Capacitive TouchScreen in polling mode <3>[ 3.877068] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 3.877214] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 3.877358] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 3.877372] i2c_write_bytes: GT828 i2c_transfer fail =-11 <6>[ 3.895153] camera 34-0-gc2035_back: RK Camera driver attached to camera0(gc2035_back) <3>[ 3.895177] rk_camera_add_device..1007.. <3>[ 3.905253] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 3.905395] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 3.905533] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 3.905547] i2c_write_bytes: GT828 i2c_transfer fail =-11 <6>[ 3.915749] camera 34-0-gc2035_back: RK Camera driver detached from camera0(gc2035_back) <3>[ 3.935255] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 3.935394] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 3.935532] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 3.935546] i2c_write_bytes: GT828 i2c_transfer fail =-11 <3>[ 3.965248] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 3.965390] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 3.965532] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 3.965546] i2c_write_bytes: GT828 i2c_transfer fail =-11 <3>[ 3.995258] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 3.995400] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 3.995541] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 3.995555] i2c_write_bytes: GT828 i2c_transfer fail =-11 <6>[ 4.025171] camera 34-0-gc2035_back: Probe gc2035_back success <3>[ 4.025267] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 4.025410] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 4.025549] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 4.025562] i2c_write_bytes: GT828 i2c_transfer fail =-11 <6>[ 4.045122] camera 34-1-sp2518_back_1: RK Camera driver attached to camera1(sp2518_back_1) <3>[ 4.045142] rk_camera_add_device..1007.. <3>[ 4.055256] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 4.055396] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 4.055533] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 4.055547] i2c_write_bytes: GT828 i2c_transfer fail =-11 <3>[ 4.085254] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 4.085392] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 4.085530] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 4.085543] i2c_write_bytes: GT828 i2c_transfer fail =-11 <3>[ 4.115286] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 4.115426] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 4.115563] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 4.115577] i2c_write_bytes: GT828 i2c_transfer fail =-11 <3>[ 4.145250] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2... <3>[ 4.145396] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1... <3>[ 4.145538] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0... <4>[ 4.145551] i2c_write_bytes: GT828 i2c_transfer fail =-11 <3>[ 4.145604] i2c i2c-4: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2... <3>[ 4.146061] i2c i2c-4: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1... <3>[ 4.146518] i2c i2c-4: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0... <3>[ 4.146533] <3>[ 4.146535] sp2518 read reg(0x2 val:0x0) failed, try to read again! <3>[ 4.146556] sp2518 read chip id high byte failed <6>[ 4.146622] camera 34-1-sp2518_back_1: RK Camera driver detached from camera1(sp2518_back_1) <3>[ 4.146648] camera 34-1-sp2518_back_1: Probe sp2518_back_1 failed <6>[ 4.165130] camera 34-2-nt99250_back_2: RK Camera driver attached to camera2(nt99250_back_2) <3>[ 4.165149] rk_camera_add_device..1007.. <3>[ 4.175124] Goodix-TS 2-005d: Warnning: I2C communication might be ERROR! <5>[ 4.175139] Goodix-TS 2-005d: The driver is removing... <3>[ 4.185340] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.185560] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.185776] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.185791] <3>[ 4.185794] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.186020] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.186236] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.186452] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.186466] <3>[ 4.186469] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.186694] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.186905] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.187116] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.187130] <3>[ 4.187133] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.187352] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.187562] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.187772] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.187787] <3>[ 4.187789] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.188008] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.188219] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.188429] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.188443] <3>[ 4.188445] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.188664] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.188874] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.189084] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.189098] <3>[ 4.189101] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.189320] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.189530] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.189740] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.189754] <3>[ 4.189757] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.189976] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 2... <3>[ 4.190186] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 1... <3>[ 4.190396] i2c i2c-4: No ack, Maybe slave(addr: 0x36) not exist or abnormal power-on, retry 0... <3>[ 4.190411] <3>[ 4.190413] nt99250 write reg(0x3021, val:0x61) failed, try to write again! <3>[ 4.190434] soft reset nt99250 failed <6>[ 4.190494] camera 34-2-nt99250_back_2: RK Camera driver detached from camera2(nt99250_back_2) <3>[ 4.190521] camera 34-2-nt99250_back_2: Probe nt99250_back_2 failed <3>[ 4.190587] <3>[ 4.190589] rk_camera_probe Memory(start:0x8e000000 size:0x800000) for IPP obtain <6>[ 4.205127] camera 33-0-gc0308_front: RK Camera driver attached to camera0(gc0308_front) <3>[ 4.205149] rk_camera_add_device..1007.. <4>[ 4.215274] Goodix-TS: probe of 2-005d failed with error -1 <6>[ 4.215358] sensor_init: Probe name sensors <6>[ 4.225496] camera 33-0-gc0308_front: RK Camera driver detached from camera0(gc0308_front) <6>[ 4.335141] camera 33-0-gc0308_front: Probe gc0308_front success <6>[ 4.355128] camera 33-1-sp0838_front_1: RK Camera driver attached to camera1(sp0838_front_1) <3>[ 4.355147] rk_camera_add_device..1007.. <3>[ 4.375574] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2... <3>[ 4.376031] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1... <3>[ 4.376486] i2c i2c-3: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0... <3>[ 4.376503] <3>[ 4.376506] sp0838 read reg(0x2 val:0x0) failed, try to read again! <3>[ 4.376527] sp0838 read chip id high byte failed <6>[ 4.376589] camera 33-1-sp0838_front_1: RK Camera driver detached from camera1(sp0838_front_1) <3>[ 4.376616] camera 33-1-sp0838_front_1: Probe sp0838_front_1 failed <6>[ 4.395126] camera 33-2-siv121d_front_2: RK Camera driver attached to camera2(siv121d_front_2) <3>[ 4.395145] rk_camera_add_device..1007.. <3>[ 4.415336] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.415516] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.415694] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.415709] <3>[ 4.415712] siv121d write reg(0x0, val:0x1) failed, try to write again! <3>[ 4.415898] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.416076] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.416253] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.416267] <3>[ 4.416270] siv121d write reg(0x0, val:0x1) failed, try to write again! <3>[ 4.416456] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.416629] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.416800] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.416815] <3>[ 4.416817] siv121d write reg(0x0, val:0x1) failed, try to write again! <3>[ 4.416998] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.417170] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.417341] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.417355] <3>[ 4.417358] siv121d write reg(0x3, val:0xa) failed, try to write again! <3>[ 4.417538] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.417710] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.417881] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.417895] <3>[ 4.417897] siv121d write reg(0x3, val:0xa) failed, try to write again! <3>[ 4.418078] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.418249] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.418421] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.418435] <3>[ 4.418438] siv121d write reg(0x3, val:0xa) failed, try to write again! <3>[ 4.518761] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.518939] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.519116] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.519130] <3>[ 4.519133] siv121d write reg(0x0, val:0x1) failed, try to write again! <3>[ 4.519318] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.519494] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.519671] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.519685] <3>[ 4.519688] siv121d write reg(0x0, val:0x1) failed, try to write again! <3>[ 4.519873] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.520049] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.520225] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.520239] <3>[ 4.520241] siv121d write reg(0x0, val:0x1) failed, try to write again! <3>[ 4.520426] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.520602] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.520778] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.520793] <3>[ 4.520795] siv121d write reg(0x3, val:0xa) failed, try to write again! <3>[ 4.520980] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.521156] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.521332] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.521346] <3>[ 4.521349] siv121d write reg(0x3, val:0xa) failed, try to write again! <3>[ 4.521534] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.521709] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.521885] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.521900] <3>[ 4.521902] siv121d write reg(0x3, val:0xa) failed, try to write again! <3>[ 4.622199] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.622377] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.622553] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.622568] <3>[ 4.622570] siv121d write reg(0x0, val:0x0) failed, try to write again! <3>[ 4.622756] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.622932] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.623107] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.623122] <3>[ 4.623124] siv121d write reg(0x0, val:0x0) failed, try to write again! <3>[ 4.623309] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.623485] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.623661] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.623675] <3>[ 4.623678] siv121d write reg(0x0, val:0x0) failed, try to write again! <3>[ 4.623908] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2... <3>[ 4.624129] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1... <3>[ 4.624351] i2c i2c-3: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0... <3>[ 4.624365] <3>[ 4.624368] siv121d read reg(0x1 val:0x0) failed, try to read again! <3>[ 4.624388] siv121d read chip id high byte failed <6>[ 4.624451] camera 33-2-siv121d_front_2: RK Camera driver detached from camera2(siv121d_front_2) <3>[ 4.624478] camera 33-2-siv121d_front_2: Probe siv121d_front_2 failed <6>[ 5.463504] tps65910-rtc tps65910-rtc: setting system clock to 2014-09-14 17:19:19 UTC (1410715159) <6>[ 5.463841] Freeing init memory: 1156K <3>[ 5.468662] init: /init.rc: 338: invalid command 'system' <3>[ 5.468683] init: /init.rc: 339: invalid command 'oneshot' <4>[ 5.469952] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. <6>[ 5.511467] keychord: using input dev rk29-keypad for fevent <3>[ 5.511616] init: cannot open '/initlogo.rle' <4>[ 5.770382] gp_rknand_info = : 0xec4d3200 <4>[ 5.770796] request IRQ_NANDC irq , ret=0......... <4>[ 5.771016] FlashCopyProgBuf1=0xc147c000 <4>[ 5.771083] ATime: 40 ns AHB: 148 timming: 1081 <4>[ 5.771129] No.1 FLASH INFO:2c 64 44 4b a9 <4>[ 5.771555] ATime: 32 ns AHB: 148 timming: 1061 <4>[ 5.771764] ATime: 32 ns AHB: 148 timming: 1061 <4>[ 5.771802] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00b218 <4>[ 5.828144] FTL INFO:Version = 438,Date = 20121130 <4>[ 5.828155] totalLogicBlkRaw = 1905 <4>[ 5.828173] gBootMedia = 1 gSdmmcFwPartOffset =0! <4>[ 5.828181] rknand_buffer.c version: 4.38 20121130! <5>[ 5.835179] 10 cmdlinepart partitions found on MTD device rk29xxnand <5>[ 5.835191] Creating 10 MTD partitions on "rk29xxnand": <5>[ 5.835205] 0x000000400000-0x000000800000 : "misc" <5>[ 5.836041] 0x000000800000-0x000001000000 : "kernel" <5>[ 5.836608] 0x000001000000-0x000002000000 : "boot" <5>[ 5.837101] 0x000002000000-0x000003000000 : "recovery" <5>[ 5.837569] 0x000003000000-0x000023000000 : "backup" <5>[ 5.838422] 0x000023000000-0x00002a400000 : "cache" <5>[ 5.838989] 0x00002a400000-0x00006a400000 : "userdata" <5>[ 5.840255] 0x00006a400000-0x00006a800000 : "kpanic" <6>[ 5.841582] apanic: Bound to mtd partition 'kpanic' <6>[ 5.841591] apanic: No panic data available <5>[ 5.841607] 0x00006a800000-0x00008a800000 : "system" <5>[ 5.842462] 0x00008a800000-0x0001dc400000 : "user" <4>[ 5.848777] startBlk = 151 sysProtAddr = 150 <6>[ 5.920581] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc <6>[ 5.973523] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc <6>[ 5.994282] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc <4>[ 6.070053] UMP: UMP device driver loaded <4>[ 6.098815] Mali: init_mali_clock mali_clock c0b09900 <4>[ 6.105427] Mali: Mali device driver loaded <4>[ 6.105747] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned. <4>[ 6.106650] ipp irq 47 <4>[ 6.106982] IPP init, version rk30-ipp 1.002 <4>[ 6.161215] mirroring: Unknown symbol video_data_to_mirroring (err 0) <4>[ 6.161273] mirroring: Unknown symbol audio_data_to_mirroring (err 0) <3>[ 6.721386] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl' <3>[ 6.729362] init: cannot find '/system/bin/drmservice', disabling 'drmservice' <3>[ 6.737002] init: cannot execve('/system/etc/install-recovery.sh'): Permission denied <4>[ 6.861357] vpu: power on <6>[ 6.861408] VPU_SERVICE: checking hw id 4831 <4>[ 6.861753] vpu: power off...done <6>[ 6.861778] VPU_SERVICE: init success <6>[ 6.863581] rk_serial rk_serial.0: baud:9600 <4>[ 6.863591] serial.0 timeout:1000000 <6>[ 6.863772] rk_serial rk_serial.0: baud:9600 <4>[ 6.863780] serial.0 timeout:1000000 <3>[ 6.864353] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead <3>[ 6.865858] android_usb: already disabled <6>[ 6.870734] adb_open <6>[ 7.212718] .423.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc] <6>[ 7.219619] .454.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc] <4>[ 7.231629] Current WiFi chip is RK903. <6>[ 7.698612] camera 34-0-gc2035_back: RK Camera driver attached to camera0(gc2035_back) <3>[ 7.698648] gc2035 sensor_ioctl cmd(0x3) is unknown ! <3>[ 7.698655] rk_camera_add_device..1007.. <6>[ 7.715761] camera 34-0-gc2035_back: RK Camera driver detached from camera0(gc2035_back) <6>[ 7.825293] camera 33-0-gc0308_front: RK Camera driver attached to camera0(gc0308_front) <3>[ 7.833531] gc0308 sensor_ioctl cmd(0x3) is unknown ! <3>[ 7.838603] rk_camera_add_device..1007.. <6>[ 7.843076] camera 33-0-gc0308_front: RK Camera driver detached from camera0(gc0308_front) <6>[ 10.335144] DWC_OTG: dwc_otg_hcd_connect_detect schedule delaywork <6>[ 10.415149] DWC_OTG: dwc_otg_hcd_enable, disable host controller <6>[ 10.415168] DWC_OTG: PortPower off <6>[ 14.294445] warning: `zygote' uses 32-bit capabilities (legacy support in use) <4>[ 18.835166] *********rk30_adc_battery_poweron_capacity_check2 Status = 3, RealAdcVal = 753, RealVol = 3676,gBatVol = 3694, gBatCap = 37, RealCapacity = 15, dischargecnt = 11, chargecnt = 0 <4>[ 18.898861] **************rk30_adc_battery_load_capacity old_capacity is 11 new_capacity is 15 <4>[ 18.898882] capacity = 11, new_capacity = 15, old_capacity = 11 <6>[ 25.035295] [BT_RFKILL]: bt turn on power <4>[ 25.136515] Current WiFi chip is RK903. <4>[ 25.179911] ======================================================= <4>[ 25.185246] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== <4>[ 25.185254] ======================================================= <4>[ 25.185262] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.25) init. <4>[ 25.185270] dhd_module_init: Enter <4>[ 25.185277] =========== WLAN placed in POWER ON ======== <3>[ 25.185338] ANDROID-ERROR) ## wifi_probe <3>[ 25.185346] ANDROID-ERROR) wifi_set_power = 1 <6>[ 25.185354] rk29sdk_wifi_power: 1 <6>[ 25.226131] acc_open <6>[ 25.255142] acc_release <6>[ 25.547635] wifi turn on power <3>[ 25.552961] ANDROID-ERROR) wifi_set_carddetect = 1 <6>[ 25.558061] rk29sdk_wifi_set_carddetect:1 <6>[ 25.562120] mmc1: slot status change detected(0-1) <6>[ 25.567022] rk29_sdmmc_change_clk_div..1945.. newDiv=42, newCLK=294Khz [sdio] <6>[ 25.567117] rk_serial rk_serial.0: baud:9600 <4>[ 25.567125] serial.0 timeout:1000000 <6>[ 25.567153] rk_serial rk_serial.0: baud:9600 <4>[ 25.567160] serial.0 timeout:1000000 <6>[ 25.567179] rk_serial rk_serial.0: baud:115200 <4>[ 25.567185] serial.0 timeout:1000000 <4>[ 25.596625] Linux Kernel SDIO/MMC Driver <4>[ 25.597318] <4>[ 25.597321] Dongle Host Driver, version 5.90.195.26.1.9 <4>[ 25.597324] Compiled in drivers/net/wireless/bcmdhd on Sep 28 2012 at 16:18:05 <6>[ 25.795158] <6>[ 25.795162] drivers/mmc/core/core.c...1827.. ===== mmc_rescan Begin....[mmc1] <6>[ 25.839051] <6>[ 25.839054] mmc_attach_sdio..800.. ===== Begin to identify card as SDIO-card. [mmc1] <7>[ 25.851436] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) <7>[ 25.853357] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) <7>[ 25.855613] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) <7>[ 25.859062] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) <6>[ 25.917031] rk29_sdmmc_change_clk_div..1945.. newDiv=0, newCLK=24750Khz [sdio] <6>[ 25.918737] mmc1: new high speed SDIO card at address 0001 <4>[ 25.920217] FW_PATH = /system/etc/firmware/fw_RK903.bin <4>[ 25.920222] NVRAM_PATH = /system/etc/firmware/nvram_RK903_26M.cal <4>[ 25.920360] F1 signature read @0x18000000=0x16044330 <4>[ 25.948097] DHD: dongle ram size is set to 294912(orig 294912) <4>[ 25.948207] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/firmware/fw_RK903b2.bin <4>[ 25.960461] wl_create_event_handler thr:177 started <4>[ 25.962890] wl_iw_attach thr:178 started <4>[ 25.963207] wl_iw_bt_init thr:179 started <4>[ 25.976091] dhd_attach thr:17a started <4>[ 25.980144] dhd_attach thr:17b started <4>[ 25.984021] dhd_attach thr:17c started <3>[ 25.988194] ANDROID-ERROR) wifi_get_mac_addr <4>[ 25.988214] Fianl fw_path=/system/etc/firmware/fw_RK903b2.bin <4>[ 25.988221] Fianl nv_path=/system/etc/firmware/nvram_RK903_26M.cal <4>[ 26.058242] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. <3>[ 26.230832] ANDROID-ERROR) wifi_get_mac_addr <4>[ 26.232711] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:22:f4:9a:97:83 <4>[ 26.306856] dhd_preinit_ioctls set keeplive failed -1 <4>[ 26.310748] dhd_rx_frame: net device is NOT registered yet. drop packet <4>[ 26.310925] dhd_rx_frame: net device is NOT registered yet. drop packet <4>[ 26.311902] Firmware version = wl0: Jul 15 2012 12:54:29 version 5.90.195.26.3 FWID 01-9c07e116 <4>[ 26.312810] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:22:f4:9a:97:83 <6>[ 26.312838] mmc_rescan_try_freq..1678.. ===== Initialize SDIO successfully. [mmc1] <4>[ 26.313675] dhd_module_init: Exit <4>[ 26.512340] <4>[ 26.512344] Dongle Host Driver, version 5.90.195.26.1.9 <4>[ 26.512347] Compiled in drivers/net/wireless/bcmdhd on Sep 28 2012 at 16:18:05 <6>[ 28.053898] enter rt5631_hifi_codec_set_dai_sysclk, syclk=11289600 <4>[ 29.732239] wl_bss_connect_done succeeded <4>[ 29.775312] wl_bss_connect_done succeeded <6>[ 30.706867] rk_serial rk_serial.0: baud:1500000 <4>[ 30.706881] serial.0 timeout:1000000 <3>[ 36.061503] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit <7>[ 36.705156] wlan0: no IPv6 routers present <4>[ 37.379116] standby rt5631 <6>[ 50.299746] enter rt5631_hifi_codec_set_dai_sysclk, syclk=11289600 <6>[ 59.464971] EXT4-fs (mtdblock8): re-mounted. Opts: (null) <6>[ 59.473788] EXT4-fs (mtdblock8): re-mounted. Opts: (null) <6>[ 59.481655] EXT4-fs (mtdblock8): re-mounted. Opts: (null) <6>[ 59.553431] EXT4-fs (mtdblock8): re-mounted. Opts: (null) <6>[ 59.594076] EXT4-fs (mtdblock8): re-mounted. Opts: (null) <6>[ 59.607486] EXT4-fs (mtdblock8): re-mounted. Opts: (null) <4>[ 59.969820] standby rt5631 <6>[ 68.745193] enter rt5631_hifi_codec_set_dai_sysclk, syclk=11289600