Forum switched to read-only as of 2020/06/01
Latest product reviews |
---|
![]() |
![]() |
Smartphones ![]() |
TV Connect ![]() |
![]() |
ClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
Please donate to support OMA and CrewRKTablets firmware work, thank you !


Moderator

Firmware Guru
2012/10/06

CM12.1 has landed on Pipo P9 / P4 😉
CrewRKTablets RK32 P9 CM12.1 build v1.1
– CrewRKTablets recovery TWRP 2.8.4.0
– CrewRKTablets recovery CWM 6.0.5.1
– sekernel #47 preempt 8 Sep 2015
– unified storage
– multi user
– stagefright patch
– latest su, su-binary, busybox
– Reboot Menue
instructions are included in the download pack
if your P9 doesn't boot up you most likely have a hardware revision
with another camera lens - pls install model fix via TWRP
======================================================
for installation on Pipo P4 change:
- parameter file in folder /rockdev
- kernel/ressource in folder /rockdev/Image
======================================
for installation on Pipo P1 change:
- kernel/ressource in folder /rockdev/Image
======================================
for installation on Pipo P7 change:
- parameter file in folder /rockdev
- kernel/ressource in folder /rockdev/Image
- install model fix via TWRP
hints:
– to improve UI feeling: disable all animation scales in developer options,
…use Nova launcher and set animation/scroll to “faster than light”
– Oma's favourite apps for LP
– Xposed framework test pack
Special thanks to mussonero !
Be aware: it is your own risk!
- Oma -
The following users say thank you to Oma7144 for this useful post:
KenMic35, admin, calestromPer aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!

2013/02/22

KenMic35 said
wow! CM12.1 for the pipo p9??
Does it really work? any bugs? is it slow/laggy?
where do you have been all this time? :)))
http://crewrktablets.arctablet.com/?p=5397
I´m with it since 1 and half months.
Use it with #47 kernel.
Problems,battery drain and little choppy.


Moderator

Firmware Guru
2012/10/06

P9 or P4? Build has unified storage, so there is no internal sdcard. Did you execute LowerFormat?
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!


Moderator

Firmware Guru
2012/10/06

Curious. Try again.
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!

2015/06/01

Thats what I did for some times now without changes:
- Flashed Riley Rom to verify the device is working (it does..)
- Switched to loader mode in AndroidTool (from the download in post #1)
- LowerFormat in AndroidTool
- Run in AndroidTool
- in TWRP chose wipe - factory reset
- reboot to system
- cyanogenmod bootscreen appears, takes some time and then goes back to the bootloader screen, cyanogen again etc etc


Moderator

Firmware Guru
2012/10/06

Can you pls verify with this parameter file (change it in folder rockdev)? http://crewrktablets.arctablet.com/?wpfb_dl=2724
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!

2015/06/01

Oma7144 said
Can you pls verify with this parameter file (change it in folder rockdev)? http://crewrktablets.arctablet.com/?wpfb_dl=2724- Oma -
Same result with that parameter file.


Moderator

Firmware Guru
2012/10/06

jonasstr said
Just tried the same with CrewRKTablets_RK32_P9_LP_5.1.1_v1.1. That one works, I think, except of one thing: NO TOUCH!!
This is a very old build. We know there are two hardware revisions with different touch controller in the field. Use kernel #47 or try this build: http://crewrktablets.arctablet.com/?wpfb_dl=2720
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!

2015/06/01

Oma7144 said
jonasstr said
Just tried the same with CrewRKTablets_RK32_P9_LP_5.1.1_v1.1. That one works, I think, except of one thing: NO TOUCH!!This is a very old build. We know there are two hardware revisions with different touch controller in the field. Use kernel #47 or try this build: http://crewrktablets.arctablet.com/?wpfb_dl=2720
- Oma -
I tried the newer Lollipop Build 1.1.7: Same result as with CM: Bootanimation - Reboot...
I tried older Lollipop Build 1.1 with kernel #47: Working fine with touch.
What can I do to debug this? I'd like a lot more to have CM12.1 on my tablet. Besides: By any chance is there a working kernel for the p7?
Most Users Ever Online: 749
Currently Online:
66 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (61), Phone (4), Tablet (1)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
jenom
kfwacky
fer30
culo1
dfrt
PQNY
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix