Can you please answer questions for my knowledge.

My question is in this in this kernel.txt I see lines:

<5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00130000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x0000
6000@0x00004000(kernel),0x00008000@0x0000a000(boot),0x00010000@0x00012000(recovery),0x00020000@0x00022000(backup),0x00040000@0x00042000(cache),0x00800000@0x00082000(userdata),0x
00002000@0x00882000(kpanic),0x0012a000@0x00884000(system),-@0x009ae000(user) bootver=2013-06-20#1.24 firmware_ver=4.2.2
 

is this not corresponding where supposed to be the proper addressees locations for my img files? since this log is from original kernel The address are different in RKandroidtool.egz:boot is at 0x0000A000 where in this line is for boot 0x00008000@0x0000a000(boot)

Thank you

Best regards

Adam

I just open the tab again and I found Q910_v20_20131208 on the board Did some google search and found nothing any idea where to look for it or maybe someone go across?

Thanks

I found exactly the same model and I write them an request for firmware since my is corrupted I will see if any response

http://www.globalsources.com/si/AS/Shenzhen-BSF/6008848100601/pdtl/Tablet-PC/1092668426.htm

The brand name is BSF

Oh and big thanks !!!  for the new hope (light it the dark canal ) with the new links !!!!

I will do update later.

Last test for today done.

Result : after finish loading firmware in to my device successfully tab restart and the screen is light for 2 minutes few restarts also light screen dimming down.The power button responds (only to light up the screen which dim down)Screen stays light for about minute and I hear click in the speaker and is off.

It's getting closer

I try both for 3G and LTE.

I also extracted from this firmware kernel and try with your firmware without success ( no light no response) .

Oma7144 said
The non 3G build is KK. So (re-)flash the 3G build, as it is JB.

Copy the attached parameter file in the folder rockdev of the V88 flash-pack. Don't forget to change the dumped kernel (from CWM backup). Tick only parameter, kernel, recovery, misc. Flash without eraseIDB.

- Oma -  

The only part I do not follow is changing kernel from cwm (don't this kernel is corrupted?)

V88 any pack egz: CrewRKTablets_RK31_Chuwi_V88_CM12.1_5.1.1_v1.1 or Oma_RK31_Chuwi_V88_JB_4.2.2_v3.4  ?

Thank you

Oma, You meant copy and paste parameter file from rockdev folder (the parameter file is already there) to image folder or you should attached some parameter file for me and you forgot?

The result is:

after following your instruction the power responds same way as previous time (press the power light on for only 5-10 sec and off) better respond to power with my kernel.Looks like is not the kernel.

Also I can do on off the light by pressing power again