Forum switched to read-only as of 2020/06/01
|Latest product reviews|
You need root access. Download a Terminal Emulator from Play Store and type:
dd if=/dev/mtd/mtd1 of=/sdcard/kernel.img bs=4096
dd if=/dev/mtd/mtd2 of=/sdcard/boot.img bs=4096
dd if=/dev/mtd/mtd3 of=/sdcard/recovery.img bs=4096
Zip and upload the files.
- Oma -
There is no kernel in the kernel partition.
In the recovery partition is this kernel xingyu #213 preempt 08.01.2013 - http://www.arctablet.com/blog/forum/cube-u9gt5/cube-u9gt5-rooted-firmware-from-visture-v5-hd-20130412/
In the boot partition is kernel kernel xingyu #236 preempt 17.01.2013 - http://www.arctablet.com/blog/forum/cube-u9gt5/cube-u9gt5-rooted-firmware-from-visture-v4-hd-20130124/
Can you pls post a screenshot with this app to make the touch issue visible?
- Oma -
Looks like I messed the kernels up a little bit
It's really hard to take a screenshot when you haven't got the appropiate buttons or softkeys on the tab. But I finally managed to find a screenshot app that uses a timer. Sorry, but this took some time...
So here we are. Both screenshots are taken in landscape mode. Here I try to show the limits of the touch area:
On the second screenshot I touch the tab in the lower left (near the back softkey):
By the way. While I took the screenshots I found out that the rotation sensor might not work too...
Ok, the strange kernel flashed his touch-controller firmware into your touch-controller.
Without the genuine kernel no chance to recover this.
- Oma -
Most Users Ever Online: 749
Currently Online: Oboronprom
Currently Browsing this Page:
Devices in use: Desktop (92), Phone (8)
Guest Posters: 43
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech