Oma7144 said
Our standard builds are for tabs ... sticks are different. Also, I've never seen AP6181 wifi. I guess this is a dead end.

- Oma -

Thanks for the reply.

AP6181 has the same wifi chip (broadcom - bcm43362) as ap6210 (this has added BT). May be the NV file needs to mention ap6181 with the same driver? Am no expert but you might get some idea with this. 

I saw so many devices with 6181 but they are for amlogic CPUs not rockchip... so i didn't flash them.

I can provide any specific file or log if that helps (Some files are there in my google drive i linked earlier).

Thank you Oma.

Oma7144 said
Yes, standard with other architecture, far away from any Rockchip standard. Pls provide a dmesg and a logcat log from a fresh booted stick. Can you also upload the system.img?

- Oma -

https://drive.google.com/open?id=0B-Kp4aJsfti2MlotOURGOGJXcVk Uploaded all files here.

System image is 1gb. If you want some specific folder in it, i'll try to extract and upload.

Thank you.

Ok

Oma7144 said

[   18.431066] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.68.WFD.OOB) init.
[   19.977009] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[   19.977225] dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_RK901a2.bin
[   19.978842] dhd_conf_read_config: Ignore config file /system/etc/firmware/config.txt
[   19.978919] Final fw_path=/system/etc/firmware/fw_RK901a2.bin
[   19.978969] Final nv_path=/system/etc/firmware/nvram_AP6181.txt
[   19.979027] Final conf_path=/system/etc/firmware/config.txt
[   20.051854] NVRAM version: AP6181_NVRAM_V1.2_03202013 for RK Dongle

Here is a port of our CM12.1 build for a RK31 stick: http://freaktab.com/forum/tv-player-support/rk3188-devices/measy-cx-tv-players-aa/544063-28-12-2015-rom-cx-919-cm12-1-lollipop-5-1-1

Pls check if this build boots with your 3.0.36+ kernel. Make sure you do NOT flash the loader.

- Oma -  

After flashing recovery gives this error MISC not found, cache not found etc

I tried adb shell, wipe via adb.. same error. My device doesn't have usb port for keyboard. So only adb is option. OTG port is not functional when using my stock kernel.

After changing recovery once i could go to boot screen saying optimizing apps 1 of 87, then restated after sometime, said 1 of 27 etc.. finally finished boot but launcher won't load. Wallpaper keeps flashing.

Mine is a 4gb stick.

Which recovery do u suggest.

Suitable parameter file.(or should i use the one u gave in zip)?

Loader version 1.xx or 2.xx (for rk30 board)?

Thank you.