Forum switched to read-only as of 2020/06/01
Latest product reviews |
---|
![]() |
![]() |
Smartphones ![]() |
TV Connect ![]() |
![]() |
ClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
Please donate to support OMA and CrewRKTablets firmware work, thank you !

2013/12/13

Hello,
I've an Archos 97b Titanium :
RK3066, Android 4.1.1 and an IPS screen with a resolution of 1464x1152 /240 dpi.
Here are links to my kernel.img and my boot.img, do you think everything is compatible with a CM10.1 build ?
Thank's
Tirook


Moderator

Firmware Guru
2012/10/06

Build: http://crewrktablets.arctablet.com/?p=1913
Kernel: http://crewrktablets.arctablet.com/?wpfb_dl=2226
Check it out.
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!

2013/12/13

Thanks for the upload.
I tried yesterday and everything is booting fine except wifi, no way to turn it on.
As I have no much time right now, and because the tablet is used, I had to restore my previous backup.
I'll configure ADB asap and willl check what configuration is used for wifi.
Tirook


Moderator

Firmware Guru
2012/10/06

Ok, let me have a dmesg and a logcat log.
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!


Moderator

Firmware Guru
2012/10/06

Ok, RTL8188 wifi. Are the logs from the running stock firmware?
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!


Moderator

Firmware Guru
2012/10/06

Yes, pls.
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!


Moderator

Firmware Guru
2012/10/06

D/WifiHW ( 407): Read wifi chip type OK !
wifi_chip_type = RTL8188EUD/WifiHW ( 407): wifi_load_driver: DRIVER_MODULE_PATH = /system/lib/modules/8188eu.ko, DRIVER_MODULE_ARG =I/wpa_supplicant( 673): Successfully initialized wpa_supplicantE/wpa_supplicant( 673): Could not read interface wlan0 flags: No such device
E/wpa_supplicant( 673): WEXT: Could not set interface 'wlan0' UP
E/wpa_supplicant( 673): wlan0: Failed to initialize driver interface
Attached the wifi driver from your stock firmware. Copy over to the CM10.1 build (/system/lib/modules) and give sufficient rights.
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!

2013/12/13

Here are the new logs.
Not the same error.
Don't know if it's a firmware issue.
The list of the stock system is :
./etc/firmware/fw_RK903b2_p2p.bin
./etc/firmware/fw_bcm4329_apsta.bin
./etc/firmware/sd8686_helper.bin
./etc/firmware/fw_bcm4319.bin
./etc/firmware/sd8686.bin
./etc/firmware/athtcmd_ram.bin
./etc/firmware/bdata.SD31.bin
./etc/firmware/fw_RK903b2.bin
./etc/firmware/fw_RK903.bin
./etc/firmware/device.bin
./etc/firmware/fw_bcm4329.bin
./etc/firmware/fw_bcm4329_wapi.bin
./etc/firmware/fw_RK903b2_apsta.bin
./etc/firmware/fw_RK901a2.bin
./etc/firmware/fw_bcm4330_apsta.bin
./etc/firmware/fw_RK901a2_apsta.bin
./etc/firmware/fw_RK901.bin
./etc/firmware/data.patch.hw2_0.bin
./etc/firmware/fw_RK901a2_p2p.bin
./etc/firmware/fw_bcm4330.bin
./etc/firmware/fw_RK901a0_apsta.bin
./etc/firmware/fw_RK903_p2p.bin
./etc/firmware/fw_RK901a0.bin


Moderator

Firmware Guru
2012/10/06

The RTL8188 does not need an extra firnware to start. Error is the same.
No idea for now. I'd like to discuss this in the team.
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!

2013/12/13

OK, let me know if you need more infos.
I noticed differences for wifi between the stock init.rk30board.rc (below) and CM 10 one, there is no Dwext param, don't know what is the impact.
service wpa_supplicant /system/bin/wpa_supplicant \
-Dnl80211 -iwlan0 -c/data/misc/wifi/wpa_supplicant.conf
#-Dnl80211 -iwlan0 -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin
# we will start as root and wpa_supplicant will switch to user wifi
# after setting up the capabilities required for WEXT
# user wifi
# group wifi inet keystore
class main
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot
#add for wifi direct (gwl)
service p2p_supplicant /system/bin/wpa_supplicant \
-iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf -N \
-ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf -e/data/misc/wifi/entropy.bin -puse_p2p_group_interface=1
# we will start as root and wpa_supplicant will switch to user wifi
# after setting up the capabilities required for WEXT
# user wifi
Most Users Ever Online: 803
Currently Online:
71 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (63), Phone (8)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
Greedrg
avaslidecast
chefnl
samahsher
sesemichel
ibiky
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix