Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS
Smartphones
ARCHOS
TV Connect
ARCHOS 101 XS

A A A
Avatar

Please consider registering
Guest

Search

— Forum Scope —






— Match —





— Forum Options —





Minimum search word length is 3 characters - maximum search word length is 84 characters

Register Lost password?

ClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288

 Please donate to support OMA and CrewRKTablets firmware work, thank you !

sp_Feed sp_TopicIcon
Zeepad 7drk 3026 Help
I need some help with a kernel mod in this tablet.
Avatar
gordonhenriquez
New Member
Forum Posts: 2
Member Since:
2016/12/02
sp_UserOfflineSmall Offline
1
2016/12/02 - 23:24
sp_Permalink sp_Print sp_EditHistory

I made some mixup with 3026 Encore Ekotab kernel and Oma trc jb 4.2.2 1.1 and the tablet runs fine. Everything is working but i have issues with the ESP8089 wifi and bluetooth. I have the dmesg for the tablet. The only kernel that works with this tablet is #928. I tried a lot of kernels and this is the only one that works. If you know how to fixit i will apreciate it.

 

DMESG LOG..

 

40] rk_serial.c v1.4 2013-06-21

<6>[ 0.627953] rk_serial.0: ttyS0 at MMIO 0x20060000 (irq = 52) is a rk29_serial.0

<6>[ 0.628108] rk_serial rk_serial.0: membase 0xdf0ac000

<6>[ 0.628396] Rockchip ion module(version: 1.0) is successfully loaded

<6>[ 0.631117] loop: module loaded

<6>[ 0.631172] Android kernel panic handler initialized (bind=kpanic)

<6>[ 0.631920] PPP generic driver version 2.4.2

<6>[ 0.632081] PPP Deflate Compression module registered

<6>[ 0.632103] PPP BSD Compression module registered

<6>[ 0.632732] PPP MPPE Compression module registered

<6>[ 0.632765] NET: Registered protocol family 24

<6>[ 0.632861] usbcore: registered new interface driver asix

<6>[ 0.632916] usbcore: registered new interface driver cdc_ether

<6>[ 0.632968] usbcore: registered new interface driver dm9620

<6>[ 0.633020] usbcore: registered new interface driver SR9700_android

<6>[ 0.633073] usbcore: registered new interface driver net1080

<6>[ 0.633127] usbcore: registered new interface driver cdc_subset

<6>[ 0.633177] usbcore: registered new interface driver zaurus

<6>[ 0.633213] cdc_ncm: 04-Aug-2011

<6>[ 0.633259] usbcore: registered new interface driver cdc_ncm

<4>[ 0.633280] Rockchip WiFi SYS interface (V1.00) ...

<6>[ 0.633336] Initializing USB Mass Storage driver...

<6>[ 0.633411] usbcore: registered new interface driver usb-storage

<6>[ 0.633434] USB Mass Storage support registered.

<6>[ 0.633562] usbcore: registered new interface driver usbserial

<6>[ 0.633613] USB Serial support registered for generic

<6>[ 0.633671] usbcore: registered new interface driver usbserial_generic

<6>[ 0.633696] usbserial: USB Serial Driver core

<6>[ 0.633738] USB Serial support registered for GSM modem (1-port)

<6>[ 0.633798] usbcore: registered new interface driver option

<6>[ 0.633820] option: v0.7.2:USB Driver for GSM modems

<4>[ 0.633910] ~~~~~~~~~~usb20otg_soft_reset

<6>[ 0.847093] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode

<6>[ 0.847128] usb20_otg usb20_otg: DWC OTG Controller

<6>[ 0.847255] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1

<6>[ 0.847312] usb20_otg usb20_otg: irq 42, io mem 0x00000000

<6>[ 0.847333] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest

<6>[ 0.847405] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

<6>[ 0.847432] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>[ 0.847458] usb usb1: Product: DWC OTG Controller

<6>[ 0.847476] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd

<6>[ 0.847497] usb usb1: SerialNumber: usb20_otg

<6>[ 0.847913] hub 1-0:1.0: USB hub found

<6>[ 0.847940] hub 1-0:1.0: 1 port detected

<6>[ 0.848403] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000

<6>[ 1.059041] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode

<6>[ 1.059086] usb20_host usb20_host: DWC OTG Controller

<6>[ 1.059140] usb20_host usb20_host: new USB bus registered, assigned bus number 2

<6>[ 1.059192] usb20_host usb20_host: irq 43, io mem 0x00000000

<6>[ 1.059251] DWC_OTG: Init: Port Power? op_state=1

<6>[ 1.059270] DWC_OTG: Init: Power Port (0)

<6>[ 1.059328] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

<6>[ 1.059354] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>[ 1.059380] usb usb2: Product: DWC OTG Controller

<6>[ 1.059398] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd

<6>[ 1.059419] usb usb2: SerialNumber: usb20_host

<6>[ 1.059798] hub 2-0:1.0: USB hub found

<6>[ 1.059822] hub 2-0:1.0: 1 port detected

<6>[ 1.061277] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[ 1.061304] android_usb gadget: Number of LUNs=2

<6>[ 1.061324] lun0: LUN: removable file: (no medium)

<6>[ 1.061343] lun1: LUN: removable file: (no medium)

<6>[ 1.061573] android_usb gadget: android_usb ready

<6>[ 1.061842] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0

<6>[ 1.062142] usbcore: registered new interface driver xpad

<6>[ 1.062207] usbcore: registered new interface driver usb_acecad

<6>[ 1.062229] acecad: v3.2:USB Acecad Flair tablet driver

<6>[ 1.062282] usbcore: registered new interface driver aiptek

<6>[ 1.062302] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)

<6>[ 1.062328] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen

<6>[ 1.062385] usbcore: registered new interface driver gtco

<4>[ 1.062405] GTCO usb driver version: 2.00.0006

<6>[ 1.062463] usbcore: registered new interface driver hanwang

<6>[ 1.062517] usbcore: registered new interface driver kbtab

<6>[ 1.062536] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver

<6>[ 1.062595] usbcore: registered new interface driver wacom

<6>[ 1.062615] wacom: v1.52:USB Wacom tablet driver

<4>[ 1.062631] ==gsl_ts_init==

<4>[ 1.062666] GSLX680 Enter gsl_ts_probe

<4>[ 1.062681] ==kzalloc success=

<4>[ 1.062696] gslx680_init_platform_hw gpio_request error

<4>[ 1.062714] [GSLX680] Enter gsl_ts_init_ts

<6>[ 1.062994] input: gslX680 as /devices/platform/rk30_i2c.2/i2c-2/2-0040/input/input1

<4>[ 1.284653] =============gsl_load_fw start==============

<4>[ 2.103489] =============gsl_load_fw end==============

<4>[ 2.325460] [GSLX680] End gsl_ts_probe

<4>[ 2.325602] ret=0

<4>[ 2.326169] sensor_register_slave:mxc6225,id=17

<4>[ 2.326210] sensor_register_slave:gs_dmard10,id=18

<6>[ 2.345098] using rtc device, rtc_hym8563, for alarms

<6>[ 2.345187] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0

<6>[ 2.345313] i2c /dev entries driver

<6>[ 2.346573] lirc_dev: IR Remote Control driver registered, major 250

<6>[ 2.346621] IR NEC protocol handler initialized

<6>[ 2.346657] IR RC5(x) protocol handler initialized

<6>[ 2.346692] IR RC6 protocol handler initialized

<6>[ 2.346726] IR JVC protocol handler initialized

<6>[ 2.346760] IR Sony protocol handler initialized

<6>[ 2.346794] IR RC5 (streamzap) protocol handler initialized

<6>[ 2.346833] IR LIRC bridge handler initialized

<6>[ 2.346865] Linux video capture interface: v2.00

<4>[ 2.347720] rk30_get_base_volt: fail to get logic voltage

<4>[ 2.347765] def_ref_volt: 3300mV, curr_ref_volt: 3300mV

<4>[ 2.347801] start_charge_logo_display

<6>[ 2.348862] device-mapper: uevent: version 1.0.3

<6>[ 2.349565] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

<6>[ 2.349903] Bluetooth: HCI UART driver ver 2.2

<6>[ 2.349944] Bluetooth: HCI H4 protocol initialized

<6>[ 2.349982] Bluetooth: HCILL protocol initialized

<6>[ 2.350105] cpuidle: using governor ladder

<6>[ 2.350140] cpuidle: using governor menu

<6>[ 2.350399] <iomux_gpio_to_mode> gpio(10864), is invalid

<6>[ 2.396282]

<6>[ 2.396286] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc0]

<6>[ 2.396302] .Line3987..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc]

<4>[ 2.396391]

<4>[ 2.396397] =================

<4>[ 2.396405] sdmmc_rescan..2022.. ====find no SDMMC host. [mmc0]

<6>[ 2.396519] .Line3987..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sdio]

<6>[ 2.396541]

<6>[ 2.396545] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<6>[ 2.398388] usbcore: registered new interface driver usbhid

<6>[ 2.398410] usbhid: USB HID core driver

<6>[ 2.398788] logger: created 256K log 'log_main'

<6>[ 2.398873] logger: created 256K log 'log_events'

<6>[ 2.398953] logger: created 256K log 'log_radio'

<6>[ 2.399031] logger: created 256K log 'log_system'

<4>[ 2.399631] rk3026_get_parameter : Can not get ap_has_alsa from kernel command line!

<6>[ 2.414700] rk29_sdmmc_change_clk_div..1706.. newDiv=80, newCLK=300Khz [sdio]

<4>[ 2.420294] rk3026_probe : rk3026 delay_time is NULL!

<4>[ 2.440491] rk3026_probe : i2s sdi from acodec val=0x1420,soc_con[0] bit 10 =1 is correct

<3>[ 2.440558] rk3026-codec rk3026-codec: Failed to add route Mic Jack->Mic Bias

<6>[ 2.441391] asoc: rk3026-hifi <-> rk29_i2s.0 mapping ok

<6>[ 2.442051] asoc: rk3026-voice <-> rk29_i2s.0 mapping ok

<6>[ 2.442640] ALSA device list:

<6>[ 2.442656] #0: RK_RK3026

<6>[ 2.442777] GACT probability NOT on

<6>[ 2.442799] Mirror/redirect action on

<6>[ 2.442815] u32 classifier

<6>[ 2.442826] Actions configured

<6>[ 2.442842] Netfilter messages via NETLINK v0.30.

<6>[ 2.442905] nf_conntrack version 0.5.0 (6373 buckets, 25492 max)

<6>[ 2.443275] ctnetlink v0.93: registering with nfnetlink.

<6>[ 2.443329] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

<6>[ 2.443353] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

<6>[ 2.443719] xt_time: kernel timezone is -0000

<6>[ 2.443901] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[ 2.444069] arp_tables: (C) 2002 David S. Miller

<6>[ 2.444137] TCP cubic registered

<6>[ 2.444152] Initializing XFRM netlink socket

<6>[ 2.444796] NET: Registered protocol family 10

<6>[ 2.445607] Mobile IPv6

<6>[ 2.445654] ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>[ 2.445821] IPv6 over IPv4 tunneling driver

<6>[ 2.446668] NET: Registered protocol family 17

<6>[ 2.446718] NET: Registered protocol family 15

<6>[ 2.447005] Bluetooth: RFCOMM TTY layer initialized

<6>[ 2.447040] Bluetooth: RFCOMM socket layer initialized

<6>[ 2.447059] Bluetooth: RFCOMM ver 1.11

<6>[ 2.447076] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[ 2.447097] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[ 2.447248] NET: Registered protocol family 35

<6>[ 2.447466] [BT_RFKILL]: Enter rfkill_rk_init

<6>[ 2.447565] [BT_RFKILL]: Request irq for bt wakeup host

<6>[ 2.447609] [BT_RFKILL]: ** disable irq

<6>[ 2.447712] [BT_RFKILL]: bt shut off power

<6>[ 2.447729] [BT_RFKILL]: bt_default device registered.

<4>[ 2.447809] pmic set pm_suspend_volt:

<6>[ 2.448188] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

<3>[ 2.448262] rk_cam_cif(3274):rk-camera-rk3026 version: v0.3.18 Zoom by arm

<5>[ 2.448276] Registering SWP/SWPB emulation handler

<3>[ 2.448397] rk_cam_io(1146):gc2035_back_6 powerdown pin(0) init failed

<3>[ 2.448477] rk_cam_io(1146):gc0329_back_12 powerdown pin(0) init failed

<6>[ 2.448901] ddrfreq: change freq to 360 MHz when normal

<6>[ 2.448942] ddrfreq: verion 3.2 20130917

<6>[ 2.448964] ddrfreq: fix cpu pause bug

<6>[ 2.448987] ddrfreq: normal 360MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 198MHz reboot 360MHz

<4>[ 2.449007] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 2.449017]

<4>[ 2.449021]

<4>[ 2.449034] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 2.452331] regulator_init_complete: axp_ldo4: incomplete constraints, leaving on

<6>[ 2.454887] i2c i2c-1: sensor_probe: gs_mxc6225,0xda208400

<4>[ 2.454914] sensor_chip_init:gs_mxc6225:devid=0x0,ops=0xc0b5d1a8

<6>[ 2.455878] input: gsensor as /devices/platform/rk30_i2c.1/i2c-1/1-0015/input/input2

<4>[ 2.456025] sensor_irq_init:use polling,delay=30 ms

<4>[ 2.456147] sensor_misc_device_register:miscdevice: mma8452_daemon

<4>[ 2.456172] sensor_probe:initialized ok,sensor name:mxc6225,type:1,id=17

<4>[ 2.456183]

<6>[ 2.456222] i2c i2c-1: sensor_probe: gs_dmard10,0xda208600

<4>[ 2.456245] sensor_chip_init:gs_dmard10:devid=0x0,ops=0xc0b5d208

<3>[ 2.456566] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2...

<3>[ 2.456877] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1...

<3>[ 2.457182] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0...

<3>[ 2.457488] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2...

<3>[ 2.457792] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1...

<3>[ 2.458096] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0...

<3>[ 2.458353] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2...

<3>[ 2.458609] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1...

<3>[ 2.458864] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0...

<3>[ 2.459065] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 2...

<3>[ 2.459264] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 1...

<3>[ 2.459463] i2c i2c-1: No ack, Maybe slave(addr: 0x18) not exist or abnormal power-on, retry 0...

<4>[ 2.459493] sensor_active:fail to active sensor

<4>[ 2.459511] sensor_init:line=247,error

<4>[ 2.459526] sensor_initial:fail to init sensor

<4>[ 2.459542] sensor_chip_init:fail to init sensor

<3>[ 2.459561] i2c i2c-1: sensor_probe failed -11

<3>[ 2.459568]

<4>[ 2.459593] sensors: probe of 1-0018 failed with error -11

<6>[ 2.459651] sensor_init: Probe name sensors

<4>[ 2.459686] sensor-dev.c v1.3 add sensor debug support 2013-3-15

<6>[ 2.460730] rtc_hym8563 1-0051: setting system clock to 2011-01-01 15:21:39 UTC (1293895299)

<6>[ 2.461072] Freeing init memory: 908K

<4>[ 2.462666] ret: 0

<4>[ 2.465456] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

<4>[ 2.494840] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 2.494851]

<4>[ 2.494855]

<4>[ 2.494887] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 2.494915] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 2.494924]

<4>[ 2.494927]

<4>[ 2.494949] ======on:1=====

<4>[ 2.495436] ===before axp 0x92:05===

<6>[ 2.506812] keychord: using input dev rk29-keypad for fevent

<4>[ 2.535115] ===after axp 0x92:05===

<4>[ 2.535154] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 2.535169]

<4>[ 2.535174]

<4>[ 2.535201] ======on:1=====

<4>[ 2.535677] ===before axp 0x92:05===

<4>[ 2.570631] gp_rknand_info = : 0xda256600

<4>[ 2.570729] rk30_chip_set:2

<4>[ 2.570799] FtlInit!

<4>[ 2.570836] No.1 FLASH ID:ad d7 94 91 60 44

<4>[ 2.571773] FTL version: 5.0.8 20131204

<4>[ 2.575114] ===after axp 0x92:05===

<4>[ 2.575139] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 2.575148]

<4>[ 2.575152]

<4>[ 2.575179] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 2.575207] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 2.575217]

<4>[ 2.575221]

<4>[ 2.575245] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 2.575284] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 2.575293]

<4>[ 2.575296]

<4>[ 2.575318] ======on:1=====

<4>[ 2.575765] ===before axp 0x92:05===

<4>[ 2.615844] ===after axp 0x92:05===

<4>[ 2.615866] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 2.615876]

<4>[ 2.615879]

<4>[ 2.615907] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 2.615934] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 2.615943]

<4>[ 2.615947]

<4>[ 2.615971] ======on:1=====

<4>[ 2.616420] ===before axp 0x92:05===

<4>[ 2.655102] ===after axp 0x92:05===

<4>[ 2.655121] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 2.655131]

<4>[ 2.655135]

<4>[ 2.655158] ======on:1=====

<4>[ 2.655604] ===before axp 0x92:05===

<4>[ 2.695044] ===after axp 0x92:05===

<4>[ 2.695062] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 2.695071]

<4>[ 2.695075]

<4>[ 2.695098] ======on:1=====

<4>[ 2.695543] ===before axp 0x92:05===

<4>[ 2.734653] gBootMedia = 1 gSdmmcFwPartOffset =0!

<4>[ 2.734675] rknand_buffer.c version: 4.40 20130830!

<5>[ 2.734934] 10 cmdlinepart partitions found on MTD device rk29xxnand

<5>[ 2.734959] Creating 10 MTD partitions on "rk29xxnand":

<5>[ 2.734984] 0x000000400000-0x000000800000 : "misc"

<4>[ 2.735075] ===after axp 0x92:05===

<4>[ 2.735113] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 2.735137]

<4>[ 2.735143]

<4>[ 2.735179] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 2.735218] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 2.735236]

<4>[ 2.735244]

<4>[ 2.735274] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 2.735310] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 2.735322]

<4>[ 2.735329]

<4>[ 2.735364] ======on:1=====

<5>[ 2.735925] 0x000000800000-0x000001400000 : "kernel"

<4>[ 2.736327] ===before axp 0x92:05===

<5>[ 2.736767] 0x000001400000-0x000002400000 : "boot"

<5>[ 2.737612] 0x000002400000-0x000004400000 : "recovery"

<5>[ 2.738493] 0x000004400000-0x000008400000 : "backup"

<5>[ 2.739333] 0x000008400000-0x000010400000 : "cache"

<5>[ 2.740186] 0x000010400000-0x000090400000 : "userdata"

<5>[ 2.743222] 0x000090400000-0x000090800000 : "kpanic"

<6>[ 2.744939] apanic: Bound to mtd partition 'kpanic'

<6>[ 2.744962] apanic: No panic data available

<5>[ 2.745235] 0x000090800000-0x0000b0800000 : "system"

<5>[ 2.747023] 0x0000b0800000-0x0000ea400000 : "user"

<4>[ 2.775149] ===after axp 0x92:05===

<4>[ 2.775179] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 2.775189]

<4>[ 2.775193]

<4>[ 2.775332] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 2.775363] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 2.775373]

<4>[ 2.775377]

<4>[ 2.775403] ======on:1=====

<4>[ 2.775859] ===before axp 0x92:05===

<6>[ 2.794314] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: discard

<4>[ 2.815124] ===after axp 0x92:05===

<4>[ 2.817580] ret: 0

<6>[ 2.821754] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: discard

<6>[ 2.836714] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: discard

<4>[ 2.853018] UMP: Using OS memory backend, allocation limit: 268435456

<4>[ 2.853053] UMP: UMP device driver loaded

<4>[ 2.854714] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=0

<4>[ 2.854726]

<4>[ 2.854730]

<4>[ 2.854764] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin= 235..PinLevel = 1

<4>[ 2.855308] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 2.875218] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2...

<3>[ 2.875679] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1...

<3>[ 2.876133] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0...

<3>[ 2.876168] gc0311_front_3(rk_cam_sensor:324): read reg(0xf0 val:0x0) failed, try to read again!

<3>[ 2.876211] gc0311_front_3(rk_cam_sensor:683): read chip id failed

<3>[ 2.876444] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 2.876495] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 2.876505]

<4>[ 2.876509]

<4>[ 2.876538] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 2.878728] Mali: Mali400 inside of rk3026!

<4>[ 2.878755] Mali: mali freq table num : 3

<4>[ 2.878774] Mali: mali freq table :Mali: 192,Mali: 256,Mali: 384,Mali:

<4>[ 2.878815] Mali: init mali clock success

<4>[ 2.889050] ret: 0

<3>[ 2.914653] camera 33-0-gc0311_front_3: Probe gc0311_front_3 failed

<4>[ 2.914884] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 2.914895]

<4>[ 2.914899]

<4>[ 2.914930] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 2.925462] ret: 0

<4>[ 2.954710] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 2.954720]

<4>[ 2.954724]

<4>[ 2.954755] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 2.954787] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 2.954797]

<4>[ 2.954802]

<4>[ 2.954825] ======on:1=====

<4>[ 2.955281] ===before axp 0x92:05===

<4>[ 2.995178] ===after axp 0x92:05===

<4>[ 2.995272] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 2.995282]

<4>[ 2.995286]

<4>[ 2.995309] ======on:1=====

<4>[ 2.995785] ===before axp 0x92:05===

<4>[ 3.035146] ===after axp 0x92:05===

<4>[ 3.035197] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 3.035219]

<4>[ 3.035227]

<4>[ 3.035281] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.035337] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 3.035357]

<4>[ 3.035365]

<4>[ 3.035416] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.035471] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 3.035491]

<4>[ 3.035500]

<4>[ 3.035540] ======on:1=====

<4>[ 3.036507] ===before axp 0x92:05===

<4>[ 3.075050] ===after axp 0x92:05===

<4>[ 3.075072] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 3.075082]

<4>[ 3.075087]

<4>[ 3.075115] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.075145] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 3.075154]

<4>[ 3.075159]

<4>[ 3.075182] ======on:1=====

<4>[ 3.075630] ===before axp 0x92:05===

<4>[ 3.115066] ===after axp 0x92:05===

<4>[ 3.115085] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 3.115095]

<4>[ 3.115099]

<4>[ 3.115123] ======on:1=====

<4>[ 3.115570] ===before axp 0x92:05===

<4>[ 3.155175] ===after axp 0x92:05===

<4>[ 3.155212] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 3.155233]

<4>[ 3.155242]

<4>[ 3.155286] ======on:1=====

<4>[ 3.155785] ===before axp 0x92:05===

<4>[ 3.195120] ===after axp 0x92:05===

<4>[ 3.195160] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 3.195182]

<4>[ 3.195191]

<4>[ 3.195248] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.195305] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 3.195327]

<4>[ 3.195335]

<4>[ 3.195391] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.195446] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 3.195467]

<4>[ 3.195476]

<4>[ 3.195524] ======on:1=====

<4>[ 3.196023] ===before axp 0x92:05===

<4>[ 3.235128] ===after axp 0x92:05===

<4>[ 3.235168] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 3.235189]

<4>[ 3.235198]

<4>[ 3.235255] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.235311] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 3.235332]

<4>[ 3.235340]

<4>[ 3.235389] ======on:1=====

<4>[ 3.235887] ===before axp 0x92:05===

<4>[ 3.275112] ===after axp 0x92:05===

<4>[ 3.277702] ret: 0

<4>[ 3.314690] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=0

<4>[ 3.314713]

<4>[ 3.314722]

<4>[ 3.314783] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin= 235..PinLevel = 1

<4>[ 3.315629] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 3.335044] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2...

<3>[ 3.335464] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1...

<3>[ 3.335874] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0...

<3>[ 3.335939] siv120d_front_4(rk_cam_sensor:158): write reg(0x0, val:0x0) failed, try to write again!

<3>[ 3.336363] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2...

<3>[ 3.336772] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1...

<3>[ 3.337180] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0...

<3>[ 3.337245] siv120d_front_4(rk_cam_sensor:158): write reg(0x0, val:0x0) failed, try to write again!

<3>[ 3.337667] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2...

<3>[ 3.338076] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1...

<3>[ 3.338485] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0...

<3>[ 3.338549] siv120d_front_4(rk_cam_sensor:158): write reg(0x0, val:0x0) failed, try to write again!

<3>[ 3.365110] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 2...

<3>[ 3.365637] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 1...

<3>[ 3.366156] i2c i2c-1: No ack, Maybe slave(addr: 0x33) not exist or abnormal power-on, retry 0...

<3>[ 3.366223] siv120d_front_4(rk_cam_sensor:324): read reg(0x1 val:0x0) failed, try to read again!

<3>[ 3.366292] siv120d(921): siv120d read chip id high byte failed

<3>[ 3.366315]

<3>[ 3.366351] siv120d(928): error: siv120d mismatched pid = 0x0

<3>[ 3.366373]

<3>[ 3.366410] siv120d_front_4(rk_cam_sensor:702): error: mismatched pid = 0x0

<3>[ 3.366435]

<3>[ 3.366877] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 3.366971] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 3.366993]

<4>[ 3.367001]

<4>[ 3.367055] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 3.379850] ret: 0

<3>[ 3.404753] camera 33-1-siv120d_front_4: Probe siv120d_front_4 failed

<4>[ 3.405150] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 3.405173]

<4>[ 3.405182]

<4>[ 3.405225] ======on:1=====

<4>[ 3.405739] ===before axp 0x92:05===

<4>[ 3.445120] ===after axp 0x92:05===

<4>[ 3.455790] ret: 0

<4>[ 3.484755] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 3.484778]

<4>[ 3.484787]

<4>[ 3.484843] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 3.484900] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 3.484921]

<4>[ 3.484930]

<4>[ 3.484980] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 3.485036] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 3.485057]

<4>[ 3.485065]

<4>[ 3.485106] ======on:1=====

<4>[ 3.485614] ===before axp 0x92:05===

<4>[ 3.525108] ===after axp 0x92:05===

<4>[ 3.525147] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 3.525169]

<4>[ 3.525177]

<4>[ 3.525230] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.525286] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 3.525307]

<4>[ 3.525315]

<4>[ 3.525365] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.525420] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 3.525441]

<4>[ 3.525449]

<4>[ 3.525489] ======on:1=====

<4>[ 3.525979] ===before axp 0x92:05===

<4>[ 3.565111] ===after axp 0x92:05===

<4>[ 3.565152] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 3.565174]

<4>[ 3.565183]

<4>[ 3.565236] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.565290] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 3.565311]

<4>[ 3.565319]

<4>[ 3.565361] ======on:1=====

<4>[ 3.565861] ===before axp 0x92:05===

<4>[ 3.605113] ===after axp 0x92:05===

<4>[ 3.605151] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 3.605172]

<4>[ 3.605180]

<4>[ 3.605224] ======on:1=====

<4>[ 3.605713] ===before axp 0x92:05===

<4>[ 3.645121] ===after axp 0x92:05===

<4>[ 3.645157] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 3.645178]

<4>[ 3.645187]

<4>[ 3.645231] ======on:1=====

<4>[ 3.645719] ===before axp 0x92:05===

<4>[ 3.685107] ===after axp 0x92:05===

<4>[ 3.685147] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 3.685168]

<4>[ 3.685177]

<4>[ 3.685232] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.685288] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 3.685309]

<4>[ 3.685318]

<4>[ 3.685369] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.685424] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 3.685444]

<4>[ 3.685453]

<4>[ 3.685497] ======on:1=====

<4>[ 3.685997] ===before axp 0x92:05===

<4>[ 3.725119] ===after axp 0x92:05===

<4>[ 3.725158] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 3.725180]

<4>[ 3.725189]

<4>[ 3.725241] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 3.725296] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 3.725317]

<4>[ 3.725326]

<4>[ 3.725371] ======on:1=====

<4>[ 3.725869] ===before axp 0x92:05===

<4>[ 3.765122] ===after axp 0x92:05===

<4>[ 3.767772] ret: 0

<4>[ 3.804661] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=0

<4>[ 3.804684]

<4>[ 3.804693]

<4>[ 3.804734] ======on:0=====

<4>[ 3.805230] ===before axp 0x92:05===

<4>[ 3.845109] ===after axp 0x92:01===

<4>[ 3.845886] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 3.895124] siv120d(928): error: siv120d mismatched pid = 0xde

<3>[ 3.895149]

<3>[ 3.895191] siv120d_back_5(rk_cam_sensor:702): error: mismatched pid = 0xde

<3>[ 3.895217]

<3>[ 3.895577] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 3.895671] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 3.895693]

<4>[ 3.895701]

<4>[ 3.895742] ======on:1=====

<4>[ 3.896254] ===before axp 0x92:01===

<4>[ 3.935130] ===after axp 0x92:05===

<4>[ 3.947849] ret: 0

<3>[ 3.974718] camera 33-2-siv120d_back_5: Probe siv120d_back_5 failed

<4>[ 3.975127] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 3.975149]

<4>[ 3.975158]

<4>[ 3.975202] ======on:1=====

<4>[ 3.975726] ===before axp 0x92:05===

<4>[ 4.015148] ===after axp 0x92:05===

<4>[ 4.025764] ret: 0

<4>[ 4.054831] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 4.054853]

<4>[ 4.054862]

<4>[ 4.054919] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 4.054976] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 4.054997]

<4>[ 4.055005]

<4>[ 4.055057] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 4.055110] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 4.055131]

<4>[ 4.055139]

<4>[ 4.055178] ======on:1=====

<4>[ 4.055689] ===before axp 0x92:05===

<4>[ 4.095130] ===after axp 0x92:05===

<4>[ 4.095171] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 4.095192]

<4>[ 4.095200]

<4>[ 4.095253] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.095309] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 4.095329]

<4>[ 4.095337]

<4>[ 4.095388] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.095443] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 4.095463]

<4>[ 4.095472]

<4>[ 4.095511] ======on:1=====

<4>[ 4.096011] ===before axp 0x92:05===

<4>[ 4.135122] ===after axp 0x92:05===

<4>[ 4.135162] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 4.135184]

<4>[ 4.135193]

<4>[ 4.135246] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.135300] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 4.135320]

<4>[ 4.135329]

<4>[ 4.135371] ======on:1=====

<4>[ 4.135871] ===before axp 0x92:05===

<4>[ 4.175122] ===after axp 0x92:05===

<4>[ 4.175159] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 4.175181]

<4>[ 4.175189]

<4>[ 4.175233] ======on:1=====

<4>[ 4.175731] ===before axp 0x92:05===

<4>[ 4.215164] ===after axp 0x92:05===

<4>[ 4.215201] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 4.215222]

<4>[ 4.215231]

<4>[ 4.215275] ======on:1=====

<4>[ 4.215775] ===before axp 0x92:05===

<4>[ 4.255167] ===after axp 0x92:05===

<4>[ 4.255207] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 4.255228]

<4>[ 4.255237]

<4>[ 4.255290] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.255347] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 4.255368]

<4>[ 4.255377]

<4>[ 4.255428] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.255481] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 4.255502]

<4>[ 4.255510]

<4>[ 4.255554] ======on:1=====

<4>[ 4.256055] ===before axp 0x92:05===

<4>[ 4.295118] ===after axp 0x92:05===

<4>[ 4.295157] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 4.295179]

<4>[ 4.295187]

<4>[ 4.295239] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.295293] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 4.295314]

<4>[ 4.295322]

<4>[ 4.295368] ======on:1=====

<4>[ 4.295866] ===before axp 0x92:05===

<4>[ 4.335130] ===after axp 0x92:05===

<4>[ 4.337779] ret: 0

<4>[ 4.374663] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=0

<4>[ 4.374685]

<4>[ 4.374694]

<4>[ 4.374736] ======on:0=====

<4>[ 4.375240] ===before axp 0x92:05===

<4>[ 4.415150] ===after axp 0x92:01===

<4>[ 4.415955] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200

<3>[ 4.416409] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...

<3>[ 4.416833] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...

<3>[ 4.417248] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...

<3>[ 4.417314] gc2035_back_6(rk_cam_sensor:158): write reg(0xfe, val:0x50) failed, try to write again!

<3>[ 4.417740] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...

<3>[ 4.418152] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...

<3>[ 4.418561] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...

<3>[ 4.418625] gc2035_back_6(rk_cam_sensor:158): write reg(0xfe, val:0x50) failed, try to write again!

<3>[ 4.419054] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...

<3>[ 4.419458] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...

<3>[ 4.419861] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...

<3>[ 4.419925] gc2035_back_6(rk_cam_sensor:158): write reg(0xfe, val:0x50) failed, try to write again!

<3>[ 4.419994] gc2035_back_6(rk_cam_sensor:374): write array failed!

<3>[ 4.420039] gc2035_back_6(rk_cam_sensor:656): soft reset failed

<3>[ 4.420062]

<3>[ 4.435136] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...

<3>[ 4.435662] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...

<3>[ 4.436183] i2c i2c-1: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...

<3>[ 4.436249] gc2035_back_6(rk_cam_sensor:324): read reg(0xf0 val:0x0) failed, try to read again!

<3>[ 4.436318] gc2035_back_6(rk_cam_sensor:683): read chip id failed

<3>[ 4.436765] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 4.436861] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 4.436882]

<4>[ 4.436891]

<4>[ 4.436934] ======on:1=====

<4>[ 4.437454] ===before axp 0x92:01===

<4>[ 4.475134] ===after axp 0x92:05===

<4>[ 4.487827] ret: 0

<3>[ 4.514809] camera 33-3-gc2035_back_6: Probe gc2035_back_6 failed

<4>[ 4.515228] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 4.515250]

<4>[ 4.515259]

<4>[ 4.515316] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.525911] ret: 0

<4>[ 4.554750] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 4.554764]

<4>[ 4.554770]

<4>[ 4.554809] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 4.554849] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 4.554863]

<4>[ 4.554868]

<4>[ 4.554905] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 4.554942] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 4.554956]

<4>[ 4.554961]

<4>[ 4.554990] ======on:1=====

<4>[ 4.555466] ===before axp 0x92:05===

<4>[ 4.595076] ===after axp 0x92:05===

<4>[ 4.595126] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 4.595140]

<4>[ 4.595145]

<4>[ 4.595174] ======on:1=====

<4>[ 4.595640] ===before axp 0x92:05===

<4>[ 4.635123] ===after axp 0x92:05===

<4>[ 4.635167] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 4.635189]

<4>[ 4.635198]

<4>[ 4.635251] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.635306] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 4.635327]

<4>[ 4.635335]

<4>[ 4.635375] ======on:1=====

<4>[ 4.635877] ===before axp 0x92:05===

<4>[ 4.675126] ===after axp 0x92:05===

<4>[ 4.675167] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 4.675189]

<4>[ 4.675198]

<4>[ 4.675251] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.675306] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 4.675327]

<4>[ 4.675335]

<4>[ 4.675377] ======on:1=====

<4>[ 4.675880] ===before axp 0x92:05===

<4>[ 4.715168] ===after axp 0x92:05===

<4>[ 4.715205] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 4.715227]

<4>[ 4.715235]

<4>[ 4.715278] ======on:1=====

<4>[ 4.715778] ===before axp 0x92:05===

<4>[ 4.755172] ===after axp 0x92:05===

<4>[ 4.755209] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 4.755231]

<4>[ 4.755240]

<4>[ 4.755285] ======on:1=====

<4>[ 4.755785] ===before axp 0x92:05===

<4>[ 4.795118] ===after axp 0x92:05===

<4>[ 4.795159] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 4.795181]

<4>[ 4.795190]

<4>[ 4.795244] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.795302] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 4.795323]

<4>[ 4.795332]

<4>[ 4.795383] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.795438] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 4.795459]

<4>[ 4.795467]

<4>[ 4.795512] ======on:1=====

<4>[ 4.796012] ===before axp 0x92:05===

<4>[ 4.835130] ===after axp 0x92:05===

<4>[ 4.835169] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 4.835191]

<4>[ 4.835200]

<4>[ 4.835253] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.835307] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 4.835328]

<4>[ 4.835337]

<4>[ 4.835382] ======on:1=====

<4>[ 4.835880] ===before axp 0x92:05===

<4>[ 4.875121] ===after axp 0x92:05===

<4>[ 4.877771] ret: 0

<4>[ 4.914696] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=0

<4>[ 4.914719]

<4>[ 4.914728]

<4>[ 4.914784] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin= 235..PinLevel = 0

<4>[ 4.915614] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 4.935049] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 4.935471] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 4.935886] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 4.935954] gc0329_front_7(rk_cam_sensor:158): write reg(0xfc, val:0x16) failed, try to write again!

<3>[ 4.936378] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 4.936790] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 4.937201] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 4.937265] gc0329_front_7(rk_cam_sensor:158): write reg(0xfc, val:0x16) failed, try to write again!

<3>[ 4.937687] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 4.938098] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 4.938507] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 4.938571] gc0329_front_7(rk_cam_sensor:158): write reg(0xfc, val:0x16) failed, try to write again!

<3>[ 4.965110] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 4.965640] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 4.966161] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 4.966226] gc0329_front_7(rk_cam_sensor:324): read reg(0x0 val:0x0) failed, try to read again!

<3>[ 4.966295] gc0329(1187): gc0329 read chip id high byte failed

<3>[ 4.966317]

<3>[ 4.966353] gc0329(1194): error: gc0329 mismatched pid = 0x0

<3>[ 4.966375]

<3>[ 4.966412] gc0329_front_7(rk_cam_sensor:702): error: mismatched pid = 0x0

<3>[ 4.966438]

<3>[ 4.966873] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 4.966971] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 4.966993]

<4>[ 4.967002]

<4>[ 4.967060] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 4.979844] ret: 0

<3>[ 5.004766] camera 33-4-gc0329_front_7: Probe gc0329_front_7 failed

<4>[ 5.005173] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 5.005195]

<4>[ 5.005204]

<4>[ 5.005259] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.015886] ret: 0

<4>[ 5.044706] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 5.044721]

<4>[ 5.044727]

<4>[ 5.044765] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 5.044805] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 5.044819]

<4>[ 5.044824]

<4>[ 5.044860] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 5.044897] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 5.044910]

<4>[ 5.044915]

<4>[ 5.044944] ======on:1=====

<4>[ 5.045415] ===before axp 0x92:05===

<4>[ 5.085062] ===after axp 0x92:05===

<4>[ 5.085088] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 5.085101]

<4>[ 5.085106]

<4>[ 5.085135] ======on:1=====

<4>[ 5.085600] ===before axp 0x92:05===

<4>[ 5.125119] ===after axp 0x92:05===

<4>[ 5.125161] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 5.125183]

<4>[ 5.125192]

<4>[ 5.125245] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.125306] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 5.125327]

<4>[ 5.125335]

<4>[ 5.125375] ======on:1=====

<4>[ 5.125875] ===before axp 0x92:05===

<4>[ 5.165129] ===after axp 0x92:05===

<4>[ 5.165169] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 5.165191]

<4>[ 5.165200]

<4>[ 5.165254] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.165308] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 5.165329]

<4>[ 5.165337]

<4>[ 5.165380] ======on:1=====

<4>[ 5.165878] ===before axp 0x92:05===

<4>[ 5.205098] ===after axp 0x92:05===

<4>[ 5.205134] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 5.205155]

<4>[ 5.205164]

<4>[ 5.205208] ======on:1=====

<4>[ 5.205695] ===before axp 0x92:05===

<4>[ 5.245096] ===after axp 0x92:05===

<4>[ 5.245134] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 5.245155]

<4>[ 5.245164]

<4>[ 5.245209] ======on:1=====

<4>[ 5.245696] ===before axp 0x92:05===

<4>[ 5.285138] ===after axp 0x92:05===

<4>[ 5.285178] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 5.285200]

<4>[ 5.285209]

<4>[ 5.285262] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.285319] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 5.285340]

<4>[ 5.285349]

<4>[ 5.285400] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.285454] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 5.285476]

<4>[ 5.285484]

<4>[ 5.285527] ======on:1=====

<4>[ 5.286026] ===before axp 0x92:05===

<4>[ 5.325106] ===after axp 0x92:05===

<4>[ 5.325145] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 5.325167]

<4>[ 5.325175]

<4>[ 5.325229] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.325282] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 5.325303]

<4>[ 5.325311]

<4>[ 5.325357] ======on:1=====

<4>[ 5.325854] ===before axp 0x92:05===

<4>[ 5.365119] ===after axp 0x92:05===

<4>[ 5.367765] ret: 0

<4>[ 5.405799] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=0

<4>[ 5.405846]

<4>[ 5.405861]

<4>[ 5.405955] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin= 235..PinLevel = 0

<4>[ 5.407152] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=0

<4>[ 5.407180]

<4>[ 5.407190]

<4>[ 5.407250] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin= 235..PinLevel = 0

<3>[ 5.410054] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 5.410799] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 5.411330] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 5.411394]

<3>[ 5.411403] sp0a19 read reg(0x2 val:0x0) failed, try to read again!

<3>[ 5.411463] sp0a19 read chip id high byte failed

<3>[ 5.411938] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 5.412037] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 5.412058]

<4>[ 5.412067]

<4>[ 5.412120] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.424854] ret: 0

<3>[ 5.455563] camera 33-5-sp0a19_front_8: Probe sp0a19_front_8 failed

<4>[ 5.456109] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 5.456131]

<4>[ 5.456140]

<4>[ 5.456186] ======on:1=====

<4>[ 5.456736] ===before axp 0x92:05===

<4>[ 5.495105] ===after axp 0x92:05===

<4>[ 5.510989] ret: 0

<4>[ 5.534769] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 5.534793]

<4>[ 5.534803]

<4>[ 5.534866] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 5.534924] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 5.534945]

<4>[ 5.534953]

<4>[ 5.535009] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 5.535076] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 5.535100]

<4>[ 5.535109]

<4>[ 5.535150] ======on:1=====

<4>[ 5.535674] ===before axp 0x92:05===

<4>[ 5.575105] ===after axp 0x92:05===

<4>[ 5.575147] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 5.575169]

<4>[ 5.575178]

<4>[ 5.575307] ======on:1=====

<4>[ 5.575873] ===before axp 0x92:05===

<4>[ 5.615218] ===after axp 0x92:05===

<4>[ 5.615288] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 5.615318]

<4>[ 5.615329]

<4>[ 5.615403] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.615481] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 5.615510]

<4>[ 5.615521]

<4>[ 5.615721] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.632021] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 5.632051]

<4>[ 5.632063]

<4>[ 5.632121] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.632175] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 5.632196]

<4>[ 5.632205]

<4>[ 5.632248] ======on:1=====

<4>[ 5.632776] ===before axp 0x92:05===

<4>[ 5.665129] ===after axp 0x92:05===

<4>[ 5.665171] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 5.665193]

<4>[ 5.665203]

<4>[ 5.665249] ======on:1=====

<4>[ 5.665792] ===before axp 0x92:05===

<4>[ 5.705164] ===after axp 0x92:05===

<4>[ 5.705203] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 5.705225]

<4>[ 5.705234]

<4>[ 5.705283] ======on:1=====

<4>[ 5.705774] ===before axp 0x92:05===

<4>[ 5.745172] ===after axp 0x92:05===

<4>[ 5.745222] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 5.745244]

<4>[ 5.745253]

<4>[ 5.745313] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.745371] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 5.745393]

<4>[ 5.745401]

<4>[ 5.745457] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.745513] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 5.745534]

<4>[ 5.745543]

<4>[ 5.745591] ======on:1=====

<4>[ 5.746095] ===before axp 0x92:05===

<4>[ 5.785175] ===after axp 0x92:05===

<4>[ 5.785219] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 5.785242]

<4>[ 5.785250]

<4>[ 5.785314] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 5.785369] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 5.785390]

<4>[ 5.785398]

<4>[ 5.785448] ======on:1=====

<4>[ 5.785941] ===before axp 0x92:05===

<4>[ 5.825128] ===after axp 0x92:05===

<4>[ 5.828000] ret: 0

<4>[ 5.864708] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=0

<4>[ 5.864739]

<4>[ 5.864754]

<4>[ 5.864808] ======on:0=====

<4>[ 5.865330] ===before axp 0x92:05===

<4>[ 5.905979] ===after axp 0x92:01===

<4>[ 5.906924] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=0

<4>[ 5.906947]

<4>[ 5.906956]

<4>[ 5.907003] ======on:0=====

<4>[ 5.907518] ===before axp 0x92:01===

<4>[ 5.945127] ===after axp 0x92:01===

<3>[ 5.947690] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 5.948209] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 5.948718] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 5.948781]

<3>[ 5.948790] sp0a19 read reg(0x2 val:0x0) failed, try to read again!

<3>[ 5.948850] sp0a19 read chip id high byte failed

<3>[ 5.949291] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 5.949390] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 5.949412]

<4>[ 5.949420]

<4>[ 5.949463] ======on:1=====

<4>[ 5.949978] ===before axp 0x92:01===

<4>[ 5.985125] ===after axp 0x92:05===

<4>[ 5.998770] ret: 0

<3>[ 6.025623] camera 33-6-sp0a19_back_9: Probe sp0a19_back_9 failed

<4>[ 6.026068] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 6.026082]

<4>[ 6.026089]

<4>[ 6.026130] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.037146] ret: 0

<4>[ 6.065315] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 6.065330]

<4>[ 6.065337]

<4>[ 6.065376] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 6.065417] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 6.065431]

<4>[ 6.065436]

<4>[ 6.065472] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 6.065509] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 6.065523]

<4>[ 6.065528]

<4>[ 6.065556] ======on:1=====

<4>[ 6.066039] ===before axp 0x92:05===

<4>[ 6.107611] ===after axp 0x92:05===

<4>[ 6.107644] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 6.107659]

<4>[ 6.107665]

<4>[ 6.107695] ======on:1=====

<4>[ 6.108162] ===before axp 0x92:05===

<4>[ 6.145159] ===after axp 0x92:05===

<4>[ 6.145213] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 6.145235]

<4>[ 6.145243]

<4>[ 6.145298] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.145354] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 6.145375]

<4>[ 6.145383]

<4>[ 6.145435] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.145492] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 6.145512]

<4>[ 6.145521]

<4>[ 6.145561] ======on:1=====

<4>[ 6.146509] ===before axp 0x92:05===

<4>[ 6.185211] ===after axp 0x92:05===

<4>[ 6.185258] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 6.185280]

<4>[ 6.185289]

<4>[ 6.185335] ======on:1=====

<4>[ 6.185835] ===before axp 0x92:05===

<4>[ 6.225165] ===after axp 0x92:05===

<4>[ 6.225211] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 6.225233]

<4>[ 6.225242]

<4>[ 6.225289] ======on:1=====

<4>[ 6.225865] ===before axp 0x92:05===

<4>[ 6.265133] ===after axp 0x92:05===

<4>[ 6.265172] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 6.265193]

<4>[ 6.265202]

<4>[ 6.265251] ======on:1=====

<4>[ 6.265746] ===before axp 0x92:05===

<4>[ 6.305154] ===after axp 0x92:05===

<4>[ 6.305203] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 6.305225]

<4>[ 6.305234]

<4>[ 6.305293] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.305352] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 6.305373]

<4>[ 6.305382]

<4>[ 6.305438] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.305493] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 6.305514]

<4>[ 6.305522]

<4>[ 6.305570] ======on:1=====

<4>[ 6.306142] ===before axp 0x92:05===

<4>[ 6.345113] ===after axp 0x92:05===

<4>[ 6.345156] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 6.345178]

<4>[ 6.345187]

<4>[ 6.345245] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.345300] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 6.345321]

<4>[ 6.345330]

<4>[ 6.345381] ======on:1=====

<4>[ 6.345873] ===before axp 0x92:05===

<4>[ 6.385155] ===after axp 0x92:05===

<4>[ 6.392710] ret: 0

<4>[ 6.424692] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=0

<4>[ 6.424721]

<4>[ 6.424731]

<4>[ 6.424791] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin= 235..PinLevel = 0

<4>[ 6.425641] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 6.445230] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 6.445761] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 6.446278] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 6.446345] gc0309_front_10(rk_cam_sensor:324): read reg(0x0 val:0x0) failed, try to read again!

<3>[ 6.446415] gc0309_front_10(rk_cam_sensor:683): read chip id failed

<3>[ 6.446821] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 6.446921] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 6.446943]

<4>[ 6.446951]

<4>[ 6.447005] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.460626] ret: 0

<3>[ 6.489445] camera 33-7-gc0309_front_10: Probe gc0309_front_10 failed

<4>[ 6.489936] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 6.489959]

<4>[ 6.489968]

<4>[ 6.490113] ======on:1=====

<4>[ 6.490691] ===before axp 0x92:05===

<4>[ 6.525128] ===after axp 0x92:05===

<4>[ 6.536371] ret: 0

<4>[ 6.565434] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 6.565457]

<4>[ 6.565467]

<4>[ 6.565606] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 6.565665] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 6.565686]

<4>[ 6.565695]

<4>[ 6.565747] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 6.565801] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 6.565822]

<4>[ 6.565830]

<4>[ 6.565869] ======on:1=====

<4>[ 6.566380] ===before axp 0x92:05===

<4>[ 6.605153] ===after axp 0x92:05===

<4>[ 6.605199] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 6.605221]

<4>[ 6.605230]

<4>[ 6.605272] ======on:1=====

<4>[ 6.605805] ===before axp 0x92:05===

<4>[ 6.645141] ===after axp 0x92:05===

<4>[ 6.645184] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 6.645206]

<4>[ 6.645215]

<4>[ 6.645270] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.645327] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 6.645347]

<4>[ 6.645356]

<4>[ 6.645407] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.645462] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 6.645483]

<4>[ 6.645491]

<4>[ 6.645531] ======on:1=====

<4>[ 6.646024] ===before axp 0x92:05===

<4>[ 6.685160] ===after axp 0x92:05===

<4>[ 6.685209] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 6.685231]

<4>[ 6.685240]

<4>[ 6.685296] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.685354] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 6.685374]

<4>[ 6.685383]

<4>[ 6.685467] ======on:1=====

<4>[ 6.685975] ===before axp 0x92:05===

<4>[ 6.725127] ===after axp 0x92:05===

<4>[ 6.725166] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 6.725188]

<4>[ 6.725196]

<4>[ 6.725242] ======on:1=====

<4>[ 6.725735] ===before axp 0x92:05===

<4>[ 6.765279] ===after axp 0x92:05===

<4>[ 6.765324] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 6.765346]

<4>[ 6.765355]

<4>[ 6.765409] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.765466] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 6.765488]

<4>[ 6.765496]

<4>[ 6.765547] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.765601] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 6.765622]

<4>[ 6.765631]

<4>[ 6.765718] ======on:1=====

<4>[ 6.766258] ===before axp 0x92:05===

<4>[ 6.805245] ===after axp 0x92:05===

<4>[ 6.805296] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 6.805318]

<4>[ 6.805327]

<4>[ 6.805386] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 6.805441] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 6.805462]

<4>[ 6.805471]

<4>[ 6.805521] ======on:1=====

<4>[ 6.806020] ===before axp 0x92:05===

<4>[ 6.845229] ===after axp 0x92:05===

<4>[ 6.847924] ret: 0

<4>[ 6.884732] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=0

<4>[ 6.884757]

<4>[ 6.884766]

<4>[ 6.884816] ======on:0=====

<4>[ 6.885331] ===before axp 0x92:05===

<4>[ 6.925138] ===after axp 0x92:01===

<4>[ 6.926008] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 6.945162] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 6.945688] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 6.946201] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 6.946269] gc0309_back_11(rk_cam_sensor:324): read reg(0x0 val:0x0) failed, try to read again!

<3>[ 6.946338] gc0309_back_11(rk_cam_sensor:683): read chip id failed

<3>[ 6.946852] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 6.946954] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 6.946975]

<4>[ 6.946984]

<4>[ 6.947173] ======on:1=====

<4>[ 6.947693] ===before axp 0x92:01===

<4>[ 6.985132] ===after axp 0x92:05===

<4>[ 6.998638] ret: 0

<3>[ 7.025900] camera 33-8-gc0309_back_11: Probe gc0309_back_11 failed

<4>[ 7.026386] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 7.026409]

<4>[ 7.026418]

<4>[ 7.026468] ======on:1=====

<4>[ 7.026979] ===before axp 0x92:05===

<4>[ 7.065135] ===after axp 0x92:05===

<4>[ 7.076488] ret: 0

<4>[ 7.105523] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 7.105546]

<4>[ 7.105555]

<4>[ 7.105614] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 7.105671] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 7.105692]

<4>[ 7.105701]

<4>[ 7.105752] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 7.105807] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 7.105827]

<4>[ 7.105836]

<4>[ 7.105875] ======on:1=====

<4>[ 7.106384] ===before axp 0x92:05===

<4>[ 7.145152] ===after axp 0x92:05===

<4>[ 7.145199] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 7.145220]

<4>[ 7.145229]

<4>[ 7.145270] ======on:1=====

<4>[ 7.145768] ===before axp 0x92:05===

<4>[ 7.185237] ===after axp 0x92:05===

<4>[ 7.185288] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 7.185310]

<4>[ 7.185319]

<4>[ 7.185374] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.185431] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 7.185452]

<4>[ 7.185460]

<4>[ 7.185556] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.185613] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 7.185634]

<4>[ 7.185643]

<4>[ 7.185684] ======on:1=====

<4>[ 7.186184] ===before axp 0x92:05===

<4>[ 7.225151] ===after axp 0x92:05===

<4>[ 7.225195] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 7.225217]

<4>[ 7.225226]

<4>[ 7.225319] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.225375] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 7.225396]

<4>[ 7.225404]

<4>[ 7.225446] ======on:1=====

<4>[ 7.225951] ===before axp 0x92:05===

<4>[ 7.265164] ===after axp 0x92:05===

<4>[ 7.265206] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 7.265228]

<4>[ 7.265237]

<4>[ 7.265283] ======on:1=====

<4>[ 7.265785] ===before axp 0x92:05===

<4>[ 7.305152] ===after axp 0x92:05===

<4>[ 7.305200] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 7.305223]

<4>[ 7.305232]

<4>[ 7.305288] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.305345] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 7.305367]

<4>[ 7.305376]

<4>[ 7.305428] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.305483] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 7.305504]

<4>[ 7.305512]

<4>[ 7.305557] ======on:1=====

<4>[ 7.306053] ===before axp 0x92:05===

<4>[ 7.345128] ===after axp 0x92:05===

<4>[ 7.345171] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 7.345193]

<4>[ 7.345202]

<4>[ 7.345254] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.345310] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 7.345330]

<4>[ 7.345339]

<4>[ 7.345385] ======on:1=====

<4>[ 7.345878] ===before axp 0x92:05===

<4>[ 7.385250] ===after axp 0x92:05===

<4>[ 7.387971] ret: 0

<4>[ 7.424739] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=0

<4>[ 7.424762]

<4>[ 7.424771]

<4>[ 7.424818] ======on:0=====

<4>[ 7.425330] ===before axp 0x92:05===

<4>[ 7.465358] ===after axp 0x92:01===

<4>[ 7.466244] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 7.485120] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 7.485628] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 7.486043] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 7.486110] gc0329_back_12(rk_cam_sensor:158): write reg(0xfc, val:0x16) failed, try to write again!

<3>[ 7.486537] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 7.486950] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 7.487425] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 7.487491] gc0329_back_12(rk_cam_sensor:158): write reg(0xfc, val:0x16) failed, try to write again!

<3>[ 7.487944] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 7.488351] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 7.488757] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 7.488821] gc0329_back_12(rk_cam_sensor:158): write reg(0xfc, val:0x16) failed, try to write again!

<3>[ 7.515186] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 2...

<3>[ 7.515764] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 1...

<3>[ 7.516322] i2c i2c-1: No ack, Maybe slave(addr: 0x31) not exist or abnormal power-on, retry 0...

<3>[ 7.516390] gc0329_back_12(rk_cam_sensor:324): read reg(0x0 val:0x0) failed, try to read again!

<3>[ 7.516461] gc0329(1187): gc0329 read chip id high byte failed

<3>[ 7.516483]

<3>[ 7.516521] gc0329(1194): error: gc0329 mismatched pid = 0x0

<3>[ 7.516542]

<3>[ 7.516579] gc0329_back_12(rk_cam_sensor:702): error: mismatched pid = 0x0

<3>[ 7.516605]

<3>[ 7.517135] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 7.517243] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 7.517265]

<4>[ 7.517274]

<4>[ 7.517322] ======on:1=====

<4>[ 7.517842] ===before axp 0x92:01===

<4>[ 7.555198] ===after axp 0x92:05===

<4>[ 7.568680] ret: 0

<3>[ 7.595474] camera 33-9-gc0329_back_12: Probe gc0329_back_12 failed

<4>[ 7.595935] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 7.595959]

<4>[ 7.595968]

<4>[ 7.596015] ======on:1=====

<4>[ 7.596588] ===before axp 0x92:05===

<4>[ 7.635120] ===after axp 0x92:05===

<4>[ 7.646509] ret: 0

<4>[ 7.675477] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 7.675500]

<4>[ 7.675509]

<4>[ 7.675566] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 7.675623] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 7.675644]

<4>[ 7.675653]

<4>[ 7.675705] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 7.675759] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 7.675779]

<4>[ 7.675788]

<4>[ 7.675827] ======on:1=====

<4>[ 7.676344] ===before axp 0x92:05===

<4>[ 7.715196] ===after axp 0x92:05===

<4>[ 7.715241] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 7.715263]

<4>[ 7.715272]

<4>[ 7.715360] ======on:1=====

<4>[ 7.715868] ===before axp 0x92:05===

<4>[ 7.755206] ===after axp 0x92:05===

<4>[ 7.755252] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 7.755274]

<4>[ 7.755283]

<4>[ 7.755426] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.755484] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 7.755506]

<4>[ 7.755515]

<4>[ 7.755566] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.755623] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 7.755644]

<4>[ 7.755652]

<4>[ 7.755693] ======on:1=====

<4>[ 7.756198] ===before axp 0x92:05===

<4>[ 7.795583] ===after axp 0x92:05===

<4>[ 7.795634] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 7.795656]

<4>[ 7.795665]

<4>[ 7.795725] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.795780] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 7.795801]

<4>[ 7.795810]

<4>[ 7.795855] ======on:1=====

<4>[ 7.796366] ===before axp 0x92:05===

<4>[ 7.835124] ===after axp 0x92:05===

<4>[ 7.835165] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 7.835187]

<4>[ 7.835196]

<4>[ 7.835249] ======on:1=====

<4>[ 7.835752] ===before axp 0x92:05===

<4>[ 7.875112] ===after axp 0x92:05===

<4>[ 7.875163] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 7.875185]

<4>[ 7.875194]

<4>[ 7.875253] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.875311] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 7.875332]

<4>[ 7.875340]

<4>[ 7.875397] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.875466] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 7.875495]

<4>[ 7.875509]

<4>[ 7.875565] ======on:1=====

<4>[ 7.876142] ===before axp 0x92:05===

<4>[ 7.915163] ===after axp 0x92:05===

<4>[ 7.915207] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 7.915229]

<4>[ 7.915238]

<4>[ 7.915296] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 7.915351] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 7.915372]

<4>[ 7.915380]

<4>[ 7.915430] ======on:1=====

<4>[ 7.915972] ===before axp 0x92:05===

<4>[ 7.955210] ===after axp 0x92:05===

<4>[ 7.958147] ret: 0

<4>[ 7.994673] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=0

<4>[ 7.994696]

<4>[ 7.994706]

<4>[ 7.994754] ======on:0=====

<4>[ 7.995280] ===before axp 0x92:05===

<4>[ 8.035168] ===after axp 0x92:01===

<4>[ 8.036215] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 8.055535] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 8.056073] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 8.056599] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 8.056666] gc0308_back_13(rk_cam_sensor:324): read reg(0x0 val:0x0) failed, try to read again!

<3>[ 8.056734] gc0308_back_13(rk_cam_sensor:683): read chip id failed

<3>[ 8.057149] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 8.057254] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 8.057275]

<4>[ 8.057284]

<4>[ 8.057331] ======on:1=====

<4>[ 8.057853] ===before axp 0x92:01===

<4>[ 8.095111] ===after axp 0x92:05===

<4>[ 8.110029] ret: 0

<3>[ 8.135467] camera 33-10-gc0308_back_13: Probe gc0308_back_13 failed

<4>[ 8.136069] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 8.136093]

<4>[ 8.136102]

<4>[ 8.136165] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.147353] ret: 0

<4>[ 8.175457] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 8.175472]

<4>[ 8.175478]

<4>[ 8.175521] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 8.175562] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 8.175575]

<4>[ 8.175580]

<4>[ 8.175619] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 8.175657] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 8.175670]

<4>[ 8.175676]

<4>[ 8.175705] ======on:1=====

<4>[ 8.176179] ===before axp 0x92:05===

<4>[ 8.215147] ===after axp 0x92:05===

<4>[ 8.215178] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 8.215192]

<4>[ 8.215198]

<4>[ 8.215229] ======on:1=====

<4>[ 8.215701] ===before axp 0x92:05===

<4>[ 8.255127] ===after axp 0x92:05===

<4>[ 8.255157] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 8.255172]

<4>[ 8.255178]

<4>[ 8.255273] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.255314] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 8.255329]

<4>[ 8.255334]

<4>[ 8.255373] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.255413] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 8.255426]

<4>[ 8.255432]

<4>[ 8.255461] ======on:1=====

<4>[ 8.255930] ===before axp 0x92:05===

<4>[ 8.295131] ===after axp 0x92:05===

<4>[ 8.295183] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 8.295205]

<4>[ 8.295214]

<4>[ 8.295273] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.295328] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 8.295349]

<4>[ 8.295357]

<4>[ 8.295402] ======on:1=====

<4>[ 8.295923] ===before axp 0x92:05===

<4>[ 8.335117] ===after axp 0x92:05===

<4>[ 8.335158] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 8.335179]

<4>[ 8.335188]

<4>[ 8.335236] ======on:1=====

<4>[ 8.335833] ===before axp 0x92:05===

<4>[ 8.375122] ===after axp 0x92:05===

<4>[ 8.375166] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 8.375188]

<4>[ 8.375197]

<4>[ 8.375331] ======on:1=====

<4>[ 8.375893] ===before axp 0x92:05===

<4>[ 8.415152] ===after axp 0x92:05===

<4>[ 8.415202] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 8.415225]

<4>[ 8.415234]

<4>[ 8.415292] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.415348] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 8.415369]

<4>[ 8.415378]

<4>[ 8.415426] ======on:1=====

<4>[ 8.415931] ===before axp 0x92:05===

<4>[ 8.455228] ===after axp 0x92:05===

<4>[ 8.455276] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 8.455299]

<4>[ 8.455308]

<4>[ 8.455362] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.455417] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 8.455438]

<4>[ 8.455446]

<4>[ 8.455493] ======on:1=====

<4>[ 8.456001] ===before axp 0x92:05===

<4>[ 8.495113] ===after axp 0x92:05===

<4>[ 8.497851] ret: 0

<4>[ 8.534697] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=0

<4>[ 8.534721]

<4>[ 8.534731]

<4>[ 8.534807] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin= 235..PinLevel = 0

<4>[ 8.537023] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 8.555253] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 8.555778] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 8.556291] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 8.556358] gc0308_front_14(rk_cam_sensor:324): read reg(0x0 val:0x0) failed, try to read again!

<3>[ 8.556427] gc0308_front_14(rk_cam_sensor:683): read chip id failed

<3>[ 8.556863] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 8.556975] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 8.556997]

<4>[ 8.557006]

<4>[ 8.557065] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.570535] ret: 0

<3>[ 8.595619] camera 33-11-gc0308_front_14: Probe gc0308_front_14 failed

<4>[ 8.596126] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 8.596150]

<4>[ 8.596159]

<4>[ 8.596216] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.607336] ret: 0

<4>[ 8.635219] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 8.635234]

<4>[ 8.635240]

<4>[ 8.635281] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 8.635320] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 8.635334]

<4>[ 8.635339]

<4>[ 8.635375] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 8.635413] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 8.635427]

<4>[ 8.635432]

<4>[ 8.635461] ======on:1=====

<4>[ 8.636050] ===before axp 0x92:05===

<4>[ 8.675077] ===after axp 0x92:05===

<4>[ 8.675104] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 8.675119]

<4>[ 8.675124]

<4>[ 8.675155] ======on:1=====

<4>[ 8.675624] ===before axp 0x92:05===

<4>[ 8.715398] ===after axp 0x92:05===

<4>[ 8.715445] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 8.715467]

<4>[ 8.715476]

<4>[ 8.715531] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.715588] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 8.715609]

<4>[ 8.715617]

<4>[ 8.715668] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.715724] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 8.715744]

<4>[ 8.715753]

<4>[ 8.715793] ======on:1=====

<4>[ 8.716319] ===before axp 0x92:05===

<4>[ 8.755169] ===after axp 0x92:05===

<4>[ 8.755213] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 8.755236]

<4>[ 8.755245]

<4>[ 8.755423] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.755479] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 8.755500]

<4>[ 8.755509]

<4>[ 8.755553] ======on:1=====

<4>[ 8.756062] ===before axp 0x92:05===

<4>[ 8.795138] ===after axp 0x92:05===

<4>[ 8.795206] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 8.795239]

<4>[ 8.795254]

<4>[ 8.795319] ======on:1=====

<4>[ 8.795863] ===before axp 0x92:05===

<4>[ 8.835132] ===after axp 0x92:05===

<4>[ 8.835175] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 8.835196]

<4>[ 8.835205]

<4>[ 8.835255] ======on:1=====

<4>[ 8.835775] ===before axp 0x92:05===

<4>[ 8.875126] ===after axp 0x92:05===

<4>[ 8.875173] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 8.875195]

<4>[ 8.875204]

<4>[ 8.875271] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.875419] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 8.875440]

<4>[ 8.875449]

<4>[ 8.875498] ======on:1=====

<4>[ 8.876005] ===before axp 0x92:05===

<4>[ 8.915242] ===after axp 0x92:05===

<4>[ 8.915334] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 8.915356]

<4>[ 8.915365]

<4>[ 8.915422] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 8.915477] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 8.915497]

<4>[ 8.915506]

<4>[ 8.915553] ======on:1=====

<4>[ 8.916065] ===before axp 0x92:05===

<4>[ 8.955177] ===after axp 0x92:05===

<4>[ 8.957841] ret: 0

<4>[ 8.994793] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=0

<4>[ 8.994819]

<4>[ 8.994828]

<4>[ 8.994887] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin= 235..PinLevel = 0

<4>[ 8.995870] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<6>[ 9.084660] DWC_OTG: dwc_otg_hcd_enable, disable host controller

<3>[ 9.465774] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 9.465886] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 9.465909]

<4>[ 9.465918]

<4>[ 9.465973] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 9.479646] ret: 0

<4>[ 9.505435] Probe siv121d_front_15 success

<4>[ 9.505886] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 9.505909]

<4>[ 9.505918]

<4>[ 9.505967] ======on:1=====

<4>[ 9.506483] ===before axp 0x92:05===

<4>[ 9.545115] ===after axp 0x92:05===

<4>[ 9.556621] ret: 0

<4>[ 9.585475] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 9.585497]

<4>[ 9.585507]

<4>[ 9.585565] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 9.585622] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 9.585643]

<4>[ 9.585652]

<4>[ 9.585704] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 9.585758] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 9.585778]

<4>[ 9.585787]

<4>[ 9.585825] ======on:1=====

<4>[ 9.586409] ===before axp 0x92:05===

<4>[ 9.625239] ===after axp 0x92:05===

<4>[ 9.625279] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 9.625300]

<4>[ 9.625309]

<4>[ 9.625350] ======on:1=====

<4>[ 9.625855] ===before axp 0x92:05===

<4>[ 9.665133] ===after axp 0x92:05===

<4>[ 9.665176] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 9.665199]

<4>[ 9.665208]

<4>[ 9.665348] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 9.665406] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 9.665427]

<4>[ 9.665436]

<4>[ 9.665488] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 9.665544] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 9.665564]

<4>[ 9.665573]

<4>[ 9.665614] ======on:1=====

<4>[ 9.666118] ===before axp 0x92:05===

<4>[ 9.705121] ===after axp 0x92:05===

<4>[ 9.705163] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 9.705185]

<4>[ 9.705193]

<4>[ 9.705247] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 9.705301] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 9.705322]

<4>[ 9.705330]

<4>[ 9.705473] ======on:1=====

<4>[ 9.705982] ===before axp 0x92:05===

<4>[ 9.745126] ===after axp 0x92:05===

<4>[ 9.745166] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 9.745188]

<4>[ 9.745197]

<4>[ 9.745242] ======on:1=====

<4>[ 9.745733] ===before axp 0x92:05===

<4>[ 9.785145] ===after axp 0x92:05===

<4>[ 9.785184] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 9.785205]

<4>[ 9.785214]

<4>[ 9.785260] ======on:1=====

<4>[ 9.785763] ===before axp 0x92:05===

<4>[ 9.825121] ===after axp 0x92:05===

<4>[ 9.825246] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 9.825268]

<4>[ 9.825277]

<4>[ 9.825332] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 9.825390] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 9.825411]

<4>[ 9.825420]

<4>[ 9.825471] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 9.825570] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 9.825591]

<4>[ 9.825600]

<4>[ 9.825651] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 9.825786] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 9.825808]

<4>[ 9.825816]

<4>[ 9.825864] ======on:1=====

<4>[ 9.826368] ===before axp 0x92:05===

<4>[ 9.865120] ===after axp 0x92:05===

<4>[ 9.867917] ret: 0

<4>[ 9.904695] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=0

<4>[ 9.904719]

<4>[ 9.904728]

<4>[ 9.904815] ======on:0=====

<4>[ 9.905317] ===before axp 0x92:05===

<4>[ 9.945125] ===after axp 0x92:01===

<3>[ 9.945666] i2c i2c-1: 1 i2c clients have been registered at 0x33min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 10.415795] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 10.416235] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 10.416259]

<4>[ 10.416268]

<4>[ 10.416319] ======on:1=====

<4>[ 10.416824] ===before axp 0x92:01===

<4>[ 10.455191] ===after axp 0x92:05===

<4>[ 10.468646] ret: 0

<4>[ 10.495460] Probe siv121d_back_16 success

<4>[ 10.495919] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 10.495942]

<4>[ 10.495951]

<4>[ 10.496009] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 10.507216] ret: 0

<4>[ 10.535080] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 10.535095]

<4>[ 10.535100]

<4>[ 10.535141] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 10.535181] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 10.535194]

<4>[ 10.535200]

<4>[ 10.535236] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 10.535273] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 10.535287]

<4>[ 10.535293]

<4>[ 10.535321] ======on:1=====

<4>[ 10.535796] ===before axp 0x92:05===

<4>[ 10.575079] ===after axp 0x92:05===

<4>[ 10.575106] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 10.575120]

<4>[ 10.575125]

<4>[ 10.575154] ======on:1=====

<4>[ 10.575614] ===before axp 0x92:05===

<4>[ 10.615173] ===after axp 0x92:05===

<4>[ 10.615215] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 10.615237]

<4>[ 10.615246]

<4>[ 10.615299] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 10.615356] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 10.615377]

<4>[ 10.615385]

<4>[ 10.615436] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 10.615492] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 10.615512]

<4>[ 10.615521]

<4>[ 10.615560] ======on:1=====

<4>[ 10.616061] ===before axp 0x92:05===

<4>[ 10.655091] ===after axp 0x92:05===

<4>[ 10.655113] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 10.655123]

<4>[ 10.655127]

<4>[ 10.655155] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 10.655184] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 10.655194]

<4>[ 10.655198]

<4>[ 10.655221] ======on:1=====

<4>[ 10.655670] ===before axp 0x92:05===

<4>[ 10.695044] ===after axp 0x92:05===

<4>[ 10.695064] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 10.695074]

<4>[ 10.695078]

<4>[ 10.695103] ======on:1=====

<4>[ 10.695547] ===before axp 0x92:05===

<4>[ 10.735106] ===after axp 0x92:05===

<4>[ 10.735152] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 10.735173]

<4>[ 10.735182]

<4>[ 10.735313] ======on:1=====

<4>[ 10.736460] ===before axp 0x92:05===

<4>[ 10.775160] ===after axp 0x92:05===

<4>[ 10.775203] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 10.775225]

<4>[ 10.775235]

<4>[ 10.775289] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 10.775346] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 10.775367]

<4>[ 10.775376]

<4>[ 10.775427] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 10.775481] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 10.775502]

<4>[ 10.775510]

<4>[ 10.775554] ======on:1=====

<4>[ 10.776048] ===before axp 0x92:05===

<4>[ 10.815148] ===after axp 0x92:05===

<4>[ 10.815190] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 10.815212]

<4>[ 10.815220]

<4>[ 10.815267] ======on:1=====

<4>[ 10.815770] ===before axp 0x92:05===

<4>[ 10.855188] ===after axp 0x92:05===

<4>[ 10.857859] ret: 0

<4>[ 10.894705] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=0

<4>[ 10.894728]

<4>[ 10.894737]

<4>[ 10.894793] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin= 235..PinLevel = 0

<4>[ 10.895692] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 10.915200] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 10.915732] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 10.916253] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 10.916318] gc0312_front_17(rk_cam_sensor:324): read reg(0xf0 val:0x0) failed, try to read again!

<3>[ 10.916388] gc0312_front_17(rk_cam_sensor:683): read chip id failed

<3>[ 10.916789] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 10.916899] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 10.916921]

<4>[ 10.916930]

<4>[ 10.916983] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 10.929805] ret: 0

<3>[ 10.954799] camera 33-14-gc0312_front_17: Probe gc0312_front_17 failed

<4>[ 10.955275] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 10.955297]

<4>[ 10.955306]

<4>[ 10.955357] ======on:1=====

<4>[ 10.955896] ===before axp 0x92:05===

<4>[ 10.995120] ===after axp 0x92:05===

<4>[ 11.005768] ret: 0

<4>[ 11.034858] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 11.034880]

<4>[ 11.034889]

<4>[ 11.034948] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 11.035006] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 11.035028]

<4>[ 11.035036]

<4>[ 11.035088] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 11.035141] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 11.035162]

<4>[ 11.035170]

<4>[ 11.035210] ======on:1=====

<4>[ 11.035730] ===before axp 0x92:05===

<4>[ 11.075163] ===after axp 0x92:05===

<4>[ 11.075204] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 11.075225]

<4>[ 11.075234]

<4>[ 11.075275] ======on:1=====

<4>[ 11.075775] ===before axp 0x92:05===

<4>[ 11.115140] ===after axp 0x92:05===

<4>[ 11.115182] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 11.115204]

<4>[ 11.115212]

<4>[ 11.115269] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 11.115326] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 11.115346]

<4>[ 11.115355]

<4>[ 11.115411] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 11.115467] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 11.115487]

<4>[ 11.115495]

<4>[ 11.115537] ======on:1=====

<4>[ 11.116039] ===before axp 0x92:05===

<4>[ 11.155170] ===after axp 0x92:05===

<4>[ 11.155211] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 11.155233]

<4>[ 11.155241]

<4>[ 11.155299] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 11.155354] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 11.155375]

<4>[ 11.155383]

<4>[ 11.155427] ======on:1=====

<4>[ 11.155919] ===before axp 0x92:05===

<4>[ 11.195140] ===after axp 0x92:05===

<4>[ 11.195181] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 11.195203]

<4>[ 11.195211]

<4>[ 11.195257] ======on:1=====

<4>[ 11.195757] ===before axp 0x92:05===

<4>[ 11.235127] ===after axp 0x92:05===

<4>[ 11.235164] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 11.235186]

<4>[ 11.235194]

<4>[ 11.235241] ======on:1=====

<4>[ 11.235741] ===before axp 0x92:05===

<4>[ 11.275116] ===after axp 0x92:05===

<4>[ 11.275158] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 11.275180]

<4>[ 11.275189]

<4>[ 11.275246] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 11.275304] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 11.275325]

<4>[ 11.275333]

<4>[ 11.275389] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 11.275444] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 11.275465]

<4>[ 11.275473]

<4>[ 11.275521] ======on:1=====

<4>[ 11.276013] ===before axp 0x92:05===

<4>[ 11.315167] ===after axp 0x92:05===

<4>[ 11.315208] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 11.315229]

<4>[ 11.315238]

<4>[ 11.315295] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 11.318000] ret: 0

<4>[ 11.354771] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=0

<4>[ 11.354794]

<4>[ 11.354802]

<4>[ 11.354854] ======on:0=====

<4>[ 11.355364] ===before axp 0x92:05===

<4>[ 11.395123] ===after axp 0x92:01===

<4>[ 11.396023] min_w = 640,min_h = 480 ,max_real_w = 640,max_real_h = 480,max_w = 640,max_h =480

<3>[ 11.415199] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 2...

<3>[ 11.415732] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 1...

<3>[ 11.416253] i2c i2c-1: No ack, Maybe slave(addr: 0x21) not exist or abnormal power-on, retry 0...

<3>[ 11.416320] gc0312_back_18(rk_cam_sensor:324): read reg(0xf0 val:0x0) failed, try to read again!

<3>[ 11.416389] gc0312_back_18(rk_cam_sensor:683): read chip id failed

<3>[ 11.416783] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 11.416893] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 11.416915]

<4>[ 11.416923]

<4>[ 11.416972] ======on:1=====

<4>[ 11.417481] ===before axp 0x92:01===

<4>[ 11.455221] ===after axp 0x92:05===

<4>[ 11.467968] ret: 0

<3>[ 11.494731] camera 33-15-gc0312_back_18: Probe gc0312_back_18 failed

<4>[ 11.497143] Mali: @@@@@@@Mali device driver loaded success@@@@@@@@

<4>[ 11.502571] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.

<4>[ 11.503781] IPP init, version rk30-ipp 1.003

<3>[ 11.539023] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'

<3>[ 11.760796] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'

<4>[ 11.894118] vpu: power on

<6>[ 11.894222] VPU_SERVICE: checking hw id 8270

<4>[ 11.895904] vpu: power off...done

<6>[ 11.895973] VPU_SERVICE: init success

<6>[ 11.906295] rk_serial rk_serial.0: serial_rk_startup: line:0

<6>[ 11.906394] rk_serial rk_serial.0: +serial_rk_set_termios line:0

<6>[ 11.906455] rk_serial rk_serial.0: uartclk:3225600

<6>[ 11.906485] rk_serial rk_serial.0: baud:9600

<6>[ 11.906508] rk_serial rk_serial.0: quot:21

<6>[ 11.907051] rk_serial rk_serial.0: serial_rk_startup: line:0

<6>[ 11.907121] rk_serial rk_serial.0: +serial_rk_set_termios line:0

<6>[ 11.907163] rk_serial rk_serial.0: uartclk:3225600

<6>[ 11.907196] rk_serial rk_serial.0: baud:9600

<6>[ 11.907225] rk_serial rk_serial.0: quot:21

<3>[ 11.908850] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'

<3>[ 11.908918] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'

<3>[ 11.909556] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead

<3>[ 11.975275] android_usb: already disabled

<6>[ 12.101551] EXT4-fs (mtdblock8): re-mounted. Opts: barrier=1,data=ordered,discard

<4>[ 12.280291] Current WiFi chip is ESP8089.

<4>[ 12.287859] Current WiFi chip is ESP8089.

<6>[ 12.296132] .204.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]

<6>[ 12.296164] .235.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]

<4>[ 12.403410] =======================================================

<4>[ 12.403438] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 12.403462] =======================================================

<4>[ 12.403486] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 12.403513] rk29sdk_wifi_power: 1

<6>[ 12.455984] EXT4-fs (mtdblock8): re-mounted. Opts: noauto_da_alloc,barrier=0

<6>[ 12.486428] EXT4-fs (mtdblock6): re-mounted. Opts: noauto_da_alloc,barrier=0

<6>[ 12.505338] EXT4-fs (mtdblock5): re-mounted. Opts: noauto_da_alloc,barrier=0

<6>[ 12.767726] wifi turn on power

<6>[ 12.767763] rk29sdk_wifi_set_carddetect:1

<6>[ 12.767796] mmc1: slot status change detected(0-1)

<4>[ 12.817539] Loading Chuwi V88 HUB access mod

<4>[ 12.817584] Greetings from crewrktablets 😉

<4>[ 12.817615] HUBaccess mod addres check failed [0c 50 82 e5]

<6>[ 12.964744]

<6>[ 12.964751] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 13.010100] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 13.011908] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 13.012466] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 13.013023] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 13.013566] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 13.014166] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 13.098587] rk fb use 3 buffers

<6>[ 13.105583] lcdc0 win1 open,atv layer:2

<6>[ 13.105631] lcdc0 win1 closed,atv layer:1

<6>[ 13.477923] rk30-lcdc rk30-lcdc.0: blank mode:0

<4>[ 13.609428] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 13.609440]

<4>[ 13.609444]

<4>[ 13.609478] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 13.623816] ret: 0

<4>[ 13.647438] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 13.647449]

<4>[ 13.647453]

<4>[ 13.647487] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 13.647520] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 13.647530]

<4>[ 13.647534]

<4>[ 13.647562] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 13.647592] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 13.647602]

<4>[ 13.647608]

<4>[ 13.647633] ======on:1=====

<4>[ 13.648100] ===before axp 0x92:05===

<4>[ 13.685638] ===after axp 0x92:05===

<4>[ 13.685672] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 13.685689]

<4>[ 13.685694]

<4>[ 13.685725] ======on:1=====

<4>[ 13.686252] ===before axp 0x92:05===

<4>[ 13.726221] ===after axp 0x92:05===

<4>[ 13.726263] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 13.726280]

<4>[ 13.726286]

<4>[ 13.726338] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 13.726399] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 13.726420]

<4>[ 13.726425]

<4>[ 13.726458] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 13.726500] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 13.726516]

<4>[ 13.726521]

<4>[ 13.726549] ======on:1=====

<4>[ 13.727069] ===before axp 0x92:05===

<4>[ 13.765890] ===after axp 0x92:05===

<4>[ 13.767118] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 13.767140]

<4>[ 13.767145]

<4>[ 13.767194] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 13.767245] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 13.767263]

<4>[ 13.767270]

<4>[ 13.767312] ======on:1=====

<4>[ 13.767834] ===before axp 0x92:05===

<4>[ 13.805222] ===after axp 0x92:05===

<4>[ 13.805263] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 13.805279]

<4>[ 13.805287]

<4>[ 13.805323] ======on:1=====

<4>[ 13.806555] ===before axp 0x92:05===

<6>[ 13.833784] tun: Universal TUN/TAP device driver, 1.6

<6>[ 13.833822] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

<4>[ 13.845206] ===after axp 0x92:05===

<4>[ 13.845246] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 13.845262]

<4>[ 13.845270]

<4>[ 13.845310] ======on:1=====

<4>[ 13.847208] ===before axp 0x92:05===

<4>[ 13.885135] ===after axp 0x92:05===

<4>[ 13.885166] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 13.885176]

<4>[ 13.885180]

<4>[ 13.885212] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 13.885246] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 13.885256]

<4>[ 13.885260]

<4>[ 13.885287] ======on:1=====

<4>[ 13.885768] ===before axp 0x92:05===

<4>[ 13.925201] ===after axp 0x92:05===

<4>[ 13.925238] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 13.925258]

<4>[ 13.925265]

<4>[ 13.925305] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 13.925358] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 13.925375]

<4>[ 13.925382]

<4>[ 13.925452] ======on:1=====

<4>[ 13.925970] ===before axp 0x92:05===

<6>[ 13.936981] TCP veno registered

<4>[ 13.965130] ===after axp 0x92:05===

<4>[ 13.968577] ret: 0

<4>[ 14.004794] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=0

<4>[ 14.004807]

<4>[ 14.004811]

<4>[ 14.004847] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin= 235..PinLevel = 0

<3>[ 14.004915] siv121d_front_15(rk_cam_sensor:1187): generic_sensor_ioctl cmd(0x3) is unknown !

<3>[ 14.004930]

<3>[ 14.004978] siv121d_front_15(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.053553] siv121d_front_15(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.053638] siv121d_front_15(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.053694] siv121d_front_15(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.053865] siv121d_front_15(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.053920] siv121d_front_15(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.054058] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 14.054118] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 14.054128]

<4>[ 14.054132]

<4>[ 14.054164] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 14.071278] ret: 0

<4>[ 14.098618] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 14.098632]

<4>[ 14.098636]

<4>[ 14.098667] ======on:1=====

<4>[ 14.099146] ===before axp 0x92:05===

<4>[ 14.135085] ===after axp 0x92:05===

<4>[ 14.148858] ret: 0

<6>[ 14.155277] usbcore: registered new interface driver dm9601

<4>[ 14.174928] hjc:sensor_powerdown_usr_cb,gc0311_front_3,on=1

<4>[ 14.174943]

<4>[ 14.174947]

<4>[ 14.174980] sensor_powerdown_usr_cb..gc0311_front_3..PowerDownPin=235 ..PinLevel = 0

<4>[ 14.175014] hjc:sensor_powerdown_usr_cb,siv120d_front_4,on=1

<4>[ 14.175024]

<4>[ 14.175028]

<4>[ 14.175056] sensor_powerdown_usr_cb..siv120d_front_4..PowerDownPin=235 ..PinLevel = 0

<4>[ 14.175085] hjc:sensor_powerdown_usr_cb,siv120d_back_5,on=1

<4>[ 14.175095]

<4>[ 14.175099]

<4>[ 14.175125] ======on:1=====

<4>[ 14.175611] ===before axp 0x92:05===

<6>[ 14.176985] usbcore: registered new interface driver MOSCHIP usb-ethernet driver

<4>[ 14.215122] ===after axp 0x92:05===

<4>[ 14.215149] hjc:sensor_powerdown_usr_cb,gc2035_back_6,on=1

<4>[ 14.215159]

<4>[ 14.215163]

<4>[ 14.215188] ======on:1=====

<4>[ 14.215636] ===before axp 0x92:05===

<4>[ 14.255157] ===after axp 0x92:05===

<4>[ 14.255187] hjc:sensor_powerdown_usr_cb,gc0329_front_7,on=1

<4>[ 14.255198]

<4>[ 14.255202]

<4>[ 14.255232] sensor_powerdown_usr_cb..gc0329_front_7..PowerDownPin=235 ..PinLevel = 1

<4>[ 14.255265] hjc:sensor_powerdown_usr_cb,sp0a19_front_8,on=1

<4>[ 14.255277]

<4>[ 14.255280]

<4>[ 14.255309] sensor_powerdown_usr_cb..sp0a19_front_8..PowerDownPin=235 ..PinLevel = 1

<4>[ 14.255341] hjc:sensor_powerdown_usr_cb,sp0a19_back_9,on=1

<4>[ 14.255351]

<4>[ 14.255355]

<4>[ 14.255381] ======on:1=====

<4>[ 14.255832] ===before axp 0x92:05===

<6>[ 14.282992] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver

<6>[ 14.283296] usbcore: registered new interface driver rtl8150

<4>[ 14.295256] ===after axp 0x92:05===

<4>[ 14.295320] hjc:sensor_powerdown_usr_cb,gc0309_front_10,on=1

<4>[ 14.295350]

<4>[ 14.295360]

<4>[ 14.295421] sensor_powerdown_usr_cb..gc0309_front_10..PowerDownPin=235 ..PinLevel = 1

<4>[ 14.295487] hjc:sensor_powerdown_usr_cb,gc0309_back_11,on=1

<4>[ 14.295511]

<4>[ 14.295520]

<4>[ 14.295574] ======on:1=====

<4>[ 14.296107] ===before axp 0x92:05===

<4>[ 14.335243] ===after axp 0x92:05===

<4>[ 14.335293] hjc:sensor_powerdown_usr_cb,gc0329_back_12,on=1

<4>[ 14.335314]

<4>[ 14.335323]

<4>[ 14.335368] ======on:1=====

<4>[ 14.335894] ===before axp 0x92:05===

<4>[ 14.375230] ===after axp 0x92:05===

<4>[ 14.375278] hjc:sensor_powerdown_usr_cb,gc0308_back_13,on=1

<4>[ 14.375302]

<4>[ 14.375311]

<4>[ 14.375358] ======on:1=====

<4>[ 14.375848] ===before axp 0x92:05===

<4>[ 14.415123] ===after axp 0x92:05===

<4>[ 14.415161] hjc:sensor_powerdown_usr_cb,gc0308_front_14,on=1

<4>[ 14.415175]

<4>[ 14.415181]

<4>[ 14.415221] sensor_powerdown_usr_cb..gc0308_front_14..PowerDownPin=235 ..PinLevel = 1

<4>[ 14.415263] hjc:sensor_powerdown_usr_cb,siv121d_front_15,on=1

<4>[ 14.415277]

<4>[ 14.415282]

<4>[ 14.415318] sensor_powerdown_usr_cb..siv121d_front_15..PowerDownPin=235 ..PinLevel = 1

<4>[ 14.415361] hjc:sensor_powerdown_usr_cb,gc0312_front_17,on=1

<4>[ 14.415375]

<4>[ 14.415381]

<4>[ 14.415417] sensor_powerdown_usr_cb..gc0312_front_17..PowerDownPin=235 ..PinLevel = 1

<4>[ 14.416011] hjc:sensor_powerdown_usr_cb,gc0312_back_18,on=1

<4>[ 14.416027]

<4>[ 14.416033]

<4>[ 14.416069] ======on:1=====

<4>[ 14.416597] ===before axp 0x92:05===

<4>[ 14.455198] ===after axp 0x92:05===

<4>[ 14.459014] ret: 0

<4>[ 14.494690] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=0

<4>[ 14.494708]

<4>[ 14.494714]

<4>[ 14.494753] ======on:0=====

<4>[ 14.495243] ===before axp 0x92:05===

<4>[ 14.535241] ===after axp 0x92:01===

<3>[ 14.535365] siv121d_back_16(rk_cam_sensor:1187): generic_sensor_ioctl cmd(0x3) is unknown !

<3>[ 14.535406]

<3>[ 14.535497] siv121d_back_16(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.586408] siv121d_back_16(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.586495] siv121d_back_16(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.586549] siv121d_back_16(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.586601] siv121d_back_16(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.586653] siv121d_back_16(rk_cam_sensor:504): have not other series meet the requirement except init_serie,array_index = 0

<3>[ 14.586788] rk_cam_cif(1618):WARNING drivers/media/video/rk30_camera_oneframe.c_rk_camera_mclk_ctrl_1618: camera sensor mclk maybe not close, please check!!!

<4>[ 14.586999] hjc:sensor_powerdown_usr_cb,siv121d_back_16,on=1

<4>[ 14.587009]

<4>[ 14.587014]

<4>[ 14.587041] ======on:1=====

<4>[ 14.587552] ===before axp 0x92:01===

<4>[ 14.625189] ===after axp 0x92:05===

<4>[ 14.639260] ret: 0

<3>[ 14.670702] siv121d_front_15(rk_cam_sensor:1187): generic_sensor_ioctl cmd(0x3) is unknown !

<3>[ 14.670733]

<3>[ 14.671181] siv121d_back_16(rk_cam_sensor:1187): generic_sensor_ioctl cmd(0x3) is unknown !

<3>[ 14.671204]

<6>[ 15.444091] usbcore: registered new interface driver snd-usb-audio

<6>[ 15.679653] USB Serial support registered for cp210x

<6>[ 15.679909] usbcore: registered new interface driver cp210x

<6>[ 15.679934] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver

<6>[ 15.708813] USB Serial support registered for pl2303

<6>[ 15.709229] usbcore: registered new interface driver pl2303

<6>[ 15.709264] pl2303: Prolific PL2303 USB to serial adaptor driver

<6>[ 15.764860] rk29sdk_wifi_set_carddetect:0

<6>[ 15.764902] mmc1: slot status change detected(1-0)

<4>[ 15.764955] =======================================================

<4>[ 15.764998] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 15.765037] =======================================================

<4>[ 15.765067] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 15.765113] rk29sdk_wifi_power: 0

<6>[ 15.772718]

<6>[ 15.772724] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<6>[ 15.784188] USB Serial support registered for FTDI USB Serial Device

<6>[ 15.784474] usbcore: registered new interface driver ftdi_sio

<6>[ 15.784499] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver

<6>[ 15.839014] usbcore: registered new interface driver cdc_acm

<6>[ 15.839050] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

<6>[ 16.014376] wifi shut off power

<4>[ 16.014402] =======================================================

<4>[ 16.014427] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 16.014450] =======================================================

<4>[ 16.014475] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 16.014504] rk29sdk_wifi_power: 1

<6>[ 16.362171] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)

<3>[ 16.362808] init: untracked pid 433 exited

<6>[ 16.383317] wifi turn on power

<6>[ 16.383342] rk29sdk_wifi_set_carddetect:1

<6>[ 16.383364] mmc1: slot status change detected(0-1)

<6>[ 16.574701]

<6>[ 16.574709] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 16.620149] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 16.620686] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 16.621201] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 16.621786] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 16.622356] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 16.622933] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<6>[ 16.874631] DWC_OTG: ********vbus detect*********************************************

<6>[ 17.140396] DWC_OTG: ********soft connect!!!*****************************************

<6>[ 17.146409] DWC_OTG: USB SUSPEND

<6>[ 17.278789] DWC_OTG: USB RESET

<6>[ 17.310000] android_work: sent uevent USB_STATE=CONNECTED

<6>[ 17.313506] DWC_OTG: USB RESET

<6>[ 17.494484] android_usb gadget: high speed config #1: android

<6>[ 17.494851] android_work: sent uevent USB_STATE=CONFIGURED

<6>[ 19.374889] rk29sdk_wifi_set_carddetect:0

<6>[ 19.374938] mmc1: slot status change detected(1-0)

<4>[ 19.374990] =======================================================

<6>[ 19.375021]

<6>[ 19.375027] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 19.375069] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 19.375109] =======================================================

<4>[ 19.375152] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 19.375196] rk29sdk_wifi_power: 0

<6>[ 19.753872] wifi shut off power

<4>[ 19.753900] =======================================================

<4>[ 19.753927] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 19.753952] =======================================================

<4>[ 19.753980] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 19.754011] rk29sdk_wifi_power: 1

<6>[ 20.246596] wifi turn on power

<6>[ 20.246624] rk29sdk_wifi_set_carddetect:1

<6>[ 20.246653] mmc1: slot status change detected(0-1)

<6>[ 20.444668]

<6>[ 20.444673] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 20.490042] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 20.490616] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 20.491187] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 20.491758] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 20.492332] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 20.492898] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<6>[ 23.244928] rk29sdk_wifi_set_carddetect:0

<6>[ 23.244976] mmc1: slot status change detected(1-0)

<4>[ 23.245032] =======================================================

<6>[ 23.245064]

<6>[ 23.245071] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 23.245120] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 23.245145] =======================================================

<4>[ 23.245171] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 23.245200] rk29sdk_wifi_power: 0

<6>[ 23.543713] wifi shut off power

<4>[ 23.543739] =======================================================

<4>[ 23.543764] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 23.543788] =======================================================

<4>[ 23.543816] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 23.543846] rk29sdk_wifi_power: 1

<6>[ 23.798347] wifi turn on power

<6>[ 23.798371] rk29sdk_wifi_set_carddetect:1

<6>[ 23.798440] mmc1: slot status change detected(0-1)

<6>[ 23.994665]

<6>[ 23.994672] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 24.039996] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 24.040512] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 24.041019] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 24.041529] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 24.042040] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 24.042541] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<6>[ 26.794899] rk29sdk_wifi_set_carddetect:0

<6>[ 26.794936] mmc1: slot status change detected(1-0)

<4>[ 26.794994] =======================================================

<4>[ 26.795038] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 26.795080] =======================================================

<4>[ 26.795123] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 26.795178] rk29sdk_wifi_power: 0

<6>[ 26.798211]

<6>[ 26.798219] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<6>[ 27.082857] wifi shut off power

<4>[ 27.518056] RKNAND_GET_DRM_KEY

<4>[ 27.518082] return ret = 0

<6>[ 37.198276] request_suspend_state: wakeup (3->0) at 37203680505 (2011-01-01 15:22:14.231207629 UTC)

<6>[ 37.390515] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:

<6>[ 37.390574] lowmemorykiller: oom_adj 0 => oom_score_adj 0

<6>[ 37.390613] lowmemorykiller: oom_adj 1 => oom_score_adj 58

<6>[ 37.390642] lowmemorykiller: oom_adj 2 => oom_score_adj 117

<6>[ 37.390675] lowmemorykiller: oom_adj 4 => oom_score_adj 235

<6>[ 37.390703] lowmemorykiller: oom_adj 9 => oom_score_adj 529

<6>[ 37.390727] lowmemorykiller: oom_adj 15 => oom_score_adj 1000

<6>[ 37.960723] acc_open

<6>[ 37.960760] acc_release

<4>[ 40.498318] battery vol change: 100->99

<7>[ 70.113133] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 70.113363] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 70.113394] rk3026_codec_power_up : power up playback

<4>[ 75.517037] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 75.517098] rk3026_codec_power_down : power down playback

<7>[ 84.392097] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 84.392495] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 84.392527] rk3026_codec_power_up : power up playback

<6>[ 88.092128] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<4>[ 88.101963] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 88.102042] rk3026_codec_power_down : power down playback

<6>[ 90.094399] binder: release 878:878 transaction 19307 out, still active

<6>[ 90.151126] binder: 436:870 transaction failed 29189, size 7236-0

<6>[ 90.151158] binder: send failed reply for transaction 19307, target dead

<6>[ 92.040954] binder: 436:449 transaction failed 29189, size 80-0

<6>[ 92.071593] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 92.079073] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 92.209146] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 92.276042] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<7>[ 93.036663] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 93.037208] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 93.037314] rk3026_codec_power_up : power up playback

<4>[ 96.752115] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 96.752181] rk3026_codec_power_down : power down playback

<6>[ 97.667532] binder: 645:645 transaction failed 29189, size 88-0

<7>[ 103.989645] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 103.990099] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 103.990143] rk3026_codec_power_up : power up playback

<6>[ 104.450522] binder: 436:455 transaction failed 29189, size 104-0

<6>[ 104.540367] binder: 436:455 transaction failed 29189, size 104-0

<4>[ 108.630820] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 108.630871] rk3026_codec_power_down : power down playback

<7>[ 109.494079] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 109.494498] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 109.494531] rk3026_codec_power_up : power up playback

<4>[ 113.212318] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 113.212371] rk3026_codec_power_down : power down playback

<7>[ 115.782404] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 115.782657] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 115.782689] rk3026_codec_power_up : power up playback

<4>[ 120.908189] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 120.908250] rk3026_codec_power_down : power down playback

<7>[ 131.005793] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 131.006185] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 131.006249] rk3026_codec_power_up : power up playback

<4>[ 137.276553] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 137.276588] rk3026_codec_power_down : power down playback

<7>[ 142.151422] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 142.151775] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 142.151829] rk3026_codec_power_up : power up playback

<4>[ 145.861681] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 145.861741] rk3026_codec_power_down : power down playback

<7>[ 152.627621] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 152.627979] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 152.628024] rk3026_codec_power_up : power up playback

<4>[ 156.341932] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 156.341993] rk3026_codec_power_down : power down playback

<7>[ 159.289000] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 159.289363] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 159.289420] rk3026_codec_power_up : power up playback

<4>[ 161.742712] Current WiFi chip is ESP8089.

<4>[ 161.835926] =======================================================

<4>[ 161.836230] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 161.836277] =======================================================

<4>[ 161.836319] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 161.836363] rk29sdk_wifi_power: 1

<6>[ 162.092558] wifi turn on power

<6>[ 162.092583] rk29sdk_wifi_set_carddetect:1

<6>[ 162.092605] mmc1: slot status change detected(0-1)

<6>[ 162.284712]

<6>[ 162.284723] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 162.329947] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 162.330499] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 162.331032] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 162.331560] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 162.332090] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 162.332620] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 163.001796] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 163.001856] rk3026_codec_power_down : power down playback

<6>[ 165.084786] rk29sdk_wifi_set_carddetect:0

<6>[ 165.084810] mmc1: slot status change detected(1-0)

<4>[ 165.084845] =======================================================

<6>[ 165.084888]

<6>[ 165.084893] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 165.084933] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 165.084982] =======================================================

<4>[ 165.085027] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 165.085074] rk29sdk_wifi_power: 0

<6>[ 165.285672] wifi shut off power

<4>[ 165.285693] =======================================================

<4>[ 165.285717] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 165.285740] =======================================================

<4>[ 165.285766] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 165.285795] rk29sdk_wifi_power: 1

<6>[ 165.536227] wifi turn on power

<6>[ 165.536247] rk29sdk_wifi_set_carddetect:1

<6>[ 165.536265] mmc1: slot status change detected(0-1)

<6>[ 165.734708]

<6>[ 165.734719] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 165.779932] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 165.780478] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 165.781012] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 165.781540] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 165.782066] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 165.782592] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<6>[ 168.535447] rk29sdk_wifi_set_carddetect:0

<6>[ 168.535493] mmc1: slot status change detected(1-0)

<4>[ 168.535557] =======================================================

<6>[ 168.535602]

<6>[ 168.535613] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 168.535695] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 168.535738] =======================================================

<4>[ 168.535783] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 168.535836] rk29sdk_wifi_power: 0

<6>[ 168.736804] wifi shut off power

<4>[ 168.736825] =======================================================

<4>[ 168.736847] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 168.736870] =======================================================

<4>[ 168.736894] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 168.736921] rk29sdk_wifi_power: 1

<6>[ 168.987229] wifi turn on power

<6>[ 168.987247] rk29sdk_wifi_set_carddetect:1

<6>[ 168.987265] mmc1: slot status change detected(0-1)

<6>[ 169.184732]

<6>[ 169.184747] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 169.229973] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 169.230511] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 169.231043] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 169.231571] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 169.232097] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 169.232628] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<6>[ 171.985433] rk29sdk_wifi_set_carddetect:0

<6>[ 171.985480] mmc1: slot status change detected(1-0)

<4>[ 171.985543] =======================================================

<4>[ 171.985599] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<6>[ 171.985639]

<6>[ 171.985650] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 171.985729] =======================================================

<4>[ 171.985774] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 171.985827] rk29sdk_wifi_power: 0

<6>[ 172.186849] wifi shut off power

<4>[ 172.186868] =======================================================

<4>[ 172.186890] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 172.186913] =======================================================

<4>[ 172.186936] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 172.186962] rk29sdk_wifi_power: 1

<6>[ 172.437745] wifi turn on power

<6>[ 172.437769] rk29sdk_wifi_set_carddetect:1

<6>[ 172.437790] mmc1: slot status change detected(0-1)

<6>[ 172.634727]

<6>[ 172.634738] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 172.679954] rk29_sdmmc_command_complete..2894...CMD5(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 172.680498] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 172.681028] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 172.681557] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 172.682083] rk29_sdmmc_command_complete..2894...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 172.682614] rk29_sdmmc_command_complete..2894...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<6>[ 175.435383] rk29sdk_wifi_set_carddetect:0

<6>[ 175.435428] mmc1: slot status change detected(1-0)

<4>[ 175.435488] =======================================================

<6>[ 175.435528]

<6>[ 175.435539] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]

<4>[ 175.435615] ==== Dislaunching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 175.435658] =======================================================

<4>[ 175.435701] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip,Ver 1.11) init.

<6>[ 175.435752] rk29sdk_wifi_power: 0

<6>[ 175.636812] wifi shut off power

<7>[ 183.618150] i2s dma info:periodsize(4096),limit(6),buffersize(24576),over(0)

<4>[ 183.618763] rk3026_playback_path_put : set playback_path 2, pre_path 0

<4>[ 183.618822] rk3026_codec_power_up : power up playback

<3>[ 189.586437] android_usb: already disabled

<6>[ 189.606848] adb_open

<6>[ 189.874617] DWC_OTG: ********soft reconnect******************************************

<6>[ 190.069606] DWC_OTG: ********soft connect!!!*****************************************

<6>[ 190.075622] DWC_OTG: USB SUSPEND

<6>[ 190.198859] DWC_OTG: USB RESET

<6>[ 190.242278] DWC_OTG: USB RESET

<6>[ 190.333032] android_usb gadget: high speed config #1: android

<6>[ 190.334830] android_work: sent uevent USB_STATE=CONFIGURED

<4>[ 196.133013] rk3026_playback_path_put : set playback_path 0, pre_path 2

<4>[ 196.133075] rk3026_codec_power_down : power down playback

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1373
2
2016/12/03 - 18:30
sp_Permalink sp_Print

Doesn't work this way. You need the genuine kernel.

- Oma -

Avatar
gordonhenriquez
New Member
Forum Posts: 2
Member Since:
2016/12/02
sp_UserOfflineSmall Offline
3
2016/12/04 - 00:05
sp_Permalink sp_Print

Thanks oma for your quick response. The bad thing is I lost all the firmware because a malware virus in the tablet. That was a nightmare. I don't have any backup of the original kernel and the Zeepad website is down. The original version of the tablet system is rk3026-eng 4.2.2 q8k-8089 eng.android5.20140405.140914 test-keys. I want to know how to make the wifi work in it. Thanks for your support.

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1373
Forum Timezone: Europe/Paris

Most Users Ever Online: 749

Currently Online:
91 Guest(s)

Currently Browsing this Page:
1 Guest(s)


Devices in use: Desktop (85), Phone (6)

Top Posters:

Oma7144: 6315

globula_neagra: 2424

finless: 604

DarthJabba: 551

exelletor: 450

JochenKauz: 450

cracktech: 432

maikal: 394

Newest Members:

villatumpa

chack88

Yuli69

fuckthisblog

fuckregister

nooorr

Forum Stats:

Groups: 10

Forums: 185

Topics: 5997

Posts: 60356

 

Member Stats:

Guest Posters: 43

Members: 260071

Moderators: 5

Admins: 1

Administrators: admin

Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech


CrewRKTablets moderators: JochenKauz and Astralix