PiPO U8 by Oma rocks – Multi-Window Edition v5.1 - Forum

Forum switched to read-only as of 2020/06/01

Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS Smartphones
ARCHOS TV Connect
ARCHOS 101 XS

A A A

PiPO U8 by Oma rocks – Multi-Window Edition v5.1

Page: 1 2 3

Oma7144

Moderator

Firmware Guru

Forum Posts: 6315

Member Since:
2012/10/06

Offline

Thanks Received: 1386

2013/08/22 - 22:38

- CWM 6.0.3.1 recovery
- system ext4
- latest kernel
- internal Storage 4,0 GB
- PhabletUI & Multi-User & Multi-Window
- ethernet support
- init.d support
- gameloft compatible
- USB-Hub enabled
- gamepad compatible (PS2, XBox, ...)
- kernel modules (cifs, tun, lan, serial, audio)
- latest hosts, su, su-binary, busybox
- MX Video-Player, Play Music & FX Sound
- Reboot Menue, Kernel Tuner, Pimp my Rom
- Dateimanager HD (Root)
- Nova Launcher

Pipo U8 cRom v5.1

TabletUI fix
PhabletUI fix
Battery Percentage mod
Battery Percentage default
Settings mod
Settings default
==========================================================

format_NAND Instructions see download pack (written for Chuwi V88).

Further pictures: http://crewrktablets.arctablet.com/?p=1499

Be aware: it is your own risk!
- Oma -

The following users say thank you to Oma7144 for this useful post:

admin, naughtykain, iobelika, skiper19689, elvisfriendly

Per aspera ad astra, we rock the Tablets !

If you like our firmwares, please consider making a donation to support our work.
Thank you!

naughtykain

New Member

Forum Posts: 1

Member Since:
2013/08/17

Offline

2013/08/23 - 08:55

Hi Oma,

How do we navigate with the CWM, I can only do Esc [BACK] and Power [SELECT], but I cannot select up or down. Is there a touch version of the CWM?

Oma7144

Moderator

Firmware Guru

Forum Posts: 6315

Member Since:
2012/10/06

Offline

Thanks Received: 1386

2013/08/23 - 20:09

Hm, the kernel is responsible for the right keycodes.

Try an older stock kernel: http://crewrktablets.arctablet.com/?wpfb_dl=743

- Oma -

Per aspera ad astra, we rock the Tablets !

If you like our firmwares, please consider making a donation to support our work.
Thank you!

ronskie0416

New Member

Forum Posts: 5

Member Since:
2013/08/18

Offline

2013/08/29 - 07:30

Hi Oma,

Thanks for this ROM. I'm just new here and my Pipo u8. How to flash this ROM? Is your ROM base from the #335 firmware update from Pipo? Thanks again.

Oma7144

Moderator

Firmware Guru

Forum Posts: 6315

Member Since:
2012/10/06

Offline

Thanks Received: 1386

2013/08/30 - 07:02

Yep, it's based on the latest stock image. Instructions are in the download pack.

I do not have the tab, so key combination to boot into flash-mode may different.

- Oma -

Per aspera ad astra, we rock the Tablets !

If you like our firmwares, please consider making a donation to support our work.
Thank you!

ronskie0416

New Member

Forum Posts: 5

Member Since:
2013/08/18

Offline

2013/08/30 - 16:39

I just flashed your rom and looks like everything woks fine except for the CWM which cannot be controlled because U8 has no volume up and down control in the side. more games compatible, increase speed than the stock firmware from pipo. Antutu score is 17k+. multi function windows is awesome. Hoping to fix the CWM soon. Thanks again.

Oma7144

Moderator

Firmware Guru

Forum Posts: 6315

Member Since:
2012/10/06

Offline

Thanks Received: 1386

2013/08/30 - 19:35

OH, no volume rocker?

No binaries for now to compile a CWM touch.

So best is to use stock recovery: http://crewrktablets.arctablet.com/?wpfb_dl=910

Flash this recovery.img and misc.img. Tab will then format the user partitions.

- Oma -

Per aspera ad astra, we rock the Tablets !

If you like our firmwares, please consider making a donation to support our work.
Thank you!

ronskie0416

New Member

Forum Posts: 5

Member Since:
2013/08/18

Offline

2013/08/31 - 11:54

is there any difference if I flash the stock recovery. for now I'm not using the custom recovery. I can wait and hoping for the cwm for this tablet.

evelhorn

Louisville, Ky. USA

New Member

Forum Posts: 3

Member Since:
2013/08/29

Offline

Thanks Received: 1

2013/09/04 - 22:00

Hi oma, I've tried a few roms on my u8 and they seem to work fine, the only problem I'm having is the tab now boots when ever I plug it into either usb or charger. If it's plugged in and I try to turn it off it will boot right back up. Do you know if this rom does that? I believe it's a problem with PIPO's update and if your's is based on theirs than it may have the same problem.

ronskie0416

New Member

Forum Posts: 5

Member Since:
2013/08/18

Offline

2013/09/06 - 15:19

Oma7144 said
Hm, the kernel is responsible for the right keycodes.

Try an older stock kernel: http://crewrktablets.arctablet.com/?wpfb_dl=743

- Oma -

Hi Oma,

i just tried this older stock kernel you suggest above the flashed was successful but my tablet wont boot after the flashed. i've tried to flash with the stock firmware but the my tablet doesn't recognize by my pc anymore whenever i click the switch it says "this operation didn't do, there is no device. Please help...... Thanks....

Greatnloopy

New Member

Forum Posts: 2

Member Since:
2013/08/20

Offline

2013/09/08 - 01:48

Hello Oma, thanks for the ROM. I have a problem I want to ask about. When I press and hold the power button I expect to be given a power menu. But with your ROM the tablet just reboots (hotboot) without giving me any choice. Is this a bug? or is it by design?

Greatnloopy

New Member

Forum Posts: 2

Member Since:
2013/08/20

Offline

2013/09/08 - 09:49

ronskie0416,

You can boot the tablet directly into "Flash" mode so that you won't have to click the switch in the flash tool.

Turn off the tablet.
Press and hold the "ESC" button
While holding the "ESC" button plug the tablet into your PC.
After 3-4 seconds you should see or hear your computer indicate that the tablet has been plugged in.

Now if everything workded correctly, you can proceed to flash whatever you want using the flash tool without having to switch modes because the tablet is already in flashing mode.

Hope this works for you, good luck.

ronskie0416

New Member

Forum Posts: 5

Member Since:
2013/08/18

Offline

2013/09/10 - 02:30

Greatnloopy said
ronskie0416,

You can boot the tablet directly into "Flash" mode so that you won't have to click the switch in the flash tool.

Turn off the tablet.

Press and hold the "ESC" button

While holding the "ESC" button plug the tablet into your PC.

After 3-4 seconds you should see or hear your computer indicate that the tablet has been plugged in.

Now if everything workded correctly, you can proceed to flash whatever you want using the flash tool without having to switch modes because the tablet is already in flashing mode.

Hope this works for you, good luck.

Hi Greatnloopy,

Thanks for the tip, I really appreciate it. Actually my tablet already back to normal and flashed with latest firmware update from Pipo. My problem now is the charging port. I need to push hard the usb cable in order to charge and/or detect by the PC. I think the charging port is damage. What is the normal volt of the battery for this unit? Mine is 3volts only is this normal or it should be 3.7volts? Thanks again...

skiper19689

Active Member

Forum Posts: 31

Member Since:
2013/03/10

Offline