Forum switched to read-only as of 2020/06/01
| Latest product reviews |
|---|
 |
 |
Smartphones  |
TV Connect  |
 |
Register
Log In
HomeClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
 Please donate to support OMA and CrewRKTablets firmware work, thank you !
2013/06/11
Offline
ho seguito la vostra guida e utilizzando rockchip batch tool, ho flashato la rom originale del mio arnova 10b g3 con il firmware kasty_oma-arn10bg3-41-046-2G.zip, durante la programmazione era tutto a posto, poi ho notato che il touchscreen non funzionava più bene come prima e che inoltre non c'era più l'utility per la sua calibratura, come posso fare? per cortesia mi aiutate indicandomi tutta la procedura passo dopo passo? vi ringrazio e scusate se non scrivo in inglese.
Moderator
Firmware Guru
2012/01/05
Offline
Hai flashato la tableta con la opzione RESTORE ?
Sono 2 versioni da 10B G3
Uno con uno schermo dualtouch, e uno con schermo capacitivo.
The following users say thank you to globula_neagra for this useful post:
pacob692013/06/11
Offline
lo schermo è capacitivo multitouch
2013/06/11
Offline
I followed your guide and using rockchip batch tool, I flashed the original ROM of my arnova 10b g3 with the firmware kasty_oma-arn10bg3-41-046-2G.zip, when programming was all right, then I noticed that the touchscreen not working as well as they, and that there was also the utility for its calibration, how can I do? please help me showing me the whole procedure step by step?
I used before upgrade then restore, but without solving the problem!!!!!!!!!
if I try to go back to the original fw, in addition to the touchscreen defective, does not work either auto-rotate.
please help me!!!!!!!!!!!
Moderator
Firmware Guru
2012/01/05
Offline
Are you sure that you have the 10B G3 capacitive version ?
Have you tried to flash back the stock firmware ?
We don`t have a step by step guide of the initial set-up.
2013/06/11
Offline
the touch screen should be capacitive because I read it on the box, also trying to flash the rom with the stock firmware (also taken from this website) as well as the touchscreen does not work anymore defective auto-rotate.
Moderator
Firmware Guru
2012/01/05
Offline
well, my opinion is that you don`t have a capacitive tablet
2013/06/11
Offline
I do not agree because on the box it says clearly "10.1" Capacitive Multitouch Display (1024 x 600) ", also by reading more carefully the guide I noticed that there is the following restriction, which like a fool, I had not read before:
Firmware Limitations
we have observed that the touchscreen is sometimes not working just after flashing this firmware on the Arnova 10b G3, the source of the problem isn’t clear but it may be related to an issue with the touchscreen calibration routine that isn’t present in this firmware. Luckily, the fix is quite simple, just flash the stock firmware or one of our custom firmware based on it that contains the calibration.
the only thing not clear is the solution of the problem,
Where can I find the firmware that contains the calibration?
and I also need to reflash the rom again with rockchip?
Moderator
Firmware Guru
2012/01/05
Offline
yes, with rockchip batch tools
this is the stock firmware
http://www.arctablet.com/blog/forum/arnova-10b-g3/arnova-10b-g3-ics-custom-firmware-with-google-play-root-and-face-unlock/ (except the google play and root, it is stock firmware)
Most Users Ever Online: 749
Currently Online:
74 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (63), Phone (11)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
saad1977
hhhhh_Fake
onda2021-w
dede123
fjmagrini13
arnova2Root
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix
