Oma7144 said
The unsigned Rockchip driver and Windows 10 are no friends.

Here are some hints:

daddle said
I do use all RK- Win-tools under Win 10 64bit, and it works perfect.

The problem for most users is to get the adb (bootloader) drivers installed properly. For this, Win 10 must be "New Started" with the shift-button pressed, then you can choose in the upcoming Win-Problem Screen Advanced Options > Change of startup mode > Restart > select 7 or F7,  and Windows reboots with Driver signature check disabled. Only after this you can install the drivers and make them functional.

sofir786 said
Just a heads up i have managed to flash the rom via the flash tool on a windows 10 64bit machine. These are the steps i took.

1. Install driver but you need to makes sure you set the compatibility to windows 7 and and run the installer as admin. 

2. You need to do the same now with the flash tool, set the compatibility to windows 7 and run as admin.

3. Follow the guide as normal to flash rom.

Hope that helps people.  

Here is the latest Driver Assistant: http://crewrktablets.arctablet.com/?wpfb_dl=2766

- Oma -  

Hi Oma, 

thanks for the newest driver, now v. 4.3 for rockusb.inf. Still you have to use it in Win10 with Driver Signature Verification deactivated, as described in the above hint. 

So far I didn't know that making use of the compatibility-mode would override the signatur-verification in Win 10? 

I will try this method also. Thanks to sofir786.

regards, daddle

surgeman said
I'm under Windows 10 and still can't get it to work...I have tried multiple times even editing the android_winusb.inf with the proper strings for a Archos 97 Carbon and still nothing...  

Check 

http://universaladbdriver.com/category/download/

DriverAssitant_v4.4