Oma7144 said
Maybe this will help: http://www.arctablet.com/blog/forum/rk3066/bsmart-bs101-tablet/?lang=fr

The Yuandao N101 II kernel seems to have the right touch controller driver. Wifi driver could be changed in the build.

Let me first see the wifi chip from the running Cube build.

Open a terminal and type:

cat /sys/class/rkwifi/chip

Post the result.

- Oma -

can't thank you enough you gave me hope ,i flashed n101 rom and the touch now is working ,the wifi didn;t work as you said.

because i'am not a developer or an expert i need to confirm with you that i did the right way to know the wifi chib name:

i ran cmd in my win 7 after attaching my device and wrote adb devices but nothing appears on devices list then i tried to copy and past the command you wrote but it says  C:\Windows\System32>cat /sys/class/rkwifi/chip 'cat' is not recognized as an internal or external command,operable program or batch file.

in recovery mode my device does appear but the command says path not found

i realy  appreciate your help.thank you   

Oma7144 said
I did not post a link to that rom because I need this information from the running Cube build first. Download a terminal emulator from Play-Store and let me have the full information.

- Oma -

ok i did what you said and this what appears to me :-u0_a65@android

thanks for your help, waiting for you reply 

Oma7144 said

any said
ic: rk903 tod2002 1310

Is this from what you can read on the chips? Then it is RK903 wifi.

Build: http://crewrktablets.arctablet.com/?p=5617

Kernel: http://crewrktablets.arctablet.com/?wpfb_dl=1203

Model fix: http://crewrktablets.arctablet.com/?wpfb_dl=2682

Just change the kernel in folder rockdev/Image before flash. In CWM install the temp model fix.

- Oma -

sorry my job gives me a very little privet time ,i replaced the kernel with n101 rom i dowmloded and flashed it then i flashed the (RK30GENERIC_CWM_.zip) and tried to install the fix zip file you posted but it gives me installation aborted (bad),the recovery version is 6.0.3.1  .by the way i got lost in the Build link you posted so i figured that you meant the n101 rom i already flashed, please be more detailed, like i said i am not an expert i only know what i needed to know to solve my problem:).

Oma7144 said
Just use build v1.1, change the N101 II kernel and flash incl. eraseIDB. Tab will boot into CWM. Do a factory reset and install the model fix from external sdcard (copy to it before you start). That's all.

- Oma -

will do and let you know -thanx