Forum switched to read-only as of 2020/06/01
| Latest product reviews |
|---|
 |
 |
Smartphones  |
TV Connect  |
 |
Register
Log In
HomeClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
 Please donate to support OMA and CrewRKTablets firmware work, thank you !
2012/12/27
Offline
My daughters Cube U9GT V has Cube U9GT5 Rooted firmware from VISTURE V4 HD (2013/01/24) installed. All seemed to be working OK until recently, the only problem it had was a band of pixels on the visture boot screen.
But now the tablet will not power on at all, when connected via USB to a laptop and the power button pressed you get a quick flash of device connected, but this is only for about 1 second.
There is nothing displayed on the tablet screen at all.
Any help would be appreciated.
There is one problem, before I do any flashing, she asked me to backup all her app data.
Also the Esc and Volume buttons are depressed below the surface, so if anyone knows how to open the U9GTV, I will attempt to re-position them.
Moderator
Firmware Guru
2012/01/05
Offline
Have you tried to leave the tablet to charge for couple of hours ?
2012/12/27
Offline
Yes, I left it charging overnight.
I have opened up the tablet and re-positioned the Esc and Volume + - buttons.
Run Rockchip Batch Tool v1.5, this shows tablet as connected, with a green box.
But still no display.
admin
2010/09/11
Offline
Have a flashed a firmware with Rockchip Batch tool ?
You can flash the one linked below, which is a compatible firmware that also works on the Cube U9GT5 (RK3066):
Don't forget to use Restore button in the tool to flash properly.
If you like our web site, applications and firmwares, feel free to support our site. Donations are used to pay the bills for our server hosting costs, development tools and purchase new tablets to support.
2012/12/27
Offline
I would have tried that first admin.
But the problem is my daughter has about 4 months of app data as well as photos.
I remember seeing the boot recovery screen yesterday and I simply selected reboot option, but when it did reboot it froze at visture boot screen, so I held the power button until it powered off.
Since then nothing.
Is there a set of button presses to get to recovery screen again.
2012/12/27
Offline
Here is where I am at right now.
Just successfully flashed
Moderator
Firmware Guru
2012/01/05
Offline
can you explain what you exactly did step by step when you flashed the tablet ?
2012/12/27
Offline
Here are steps I followed,
1) Run Rockchip Batch Tool v1.5
2) Put power adapter in laptop, Hold Volume + then Power button + connect to PC.
3) Green square visible in connected devices on RKBT v1.5
4) Selected FW kasty-cube_u9gt5-based_visture_v5hd_97r_20130412-411-rooted3
5) Everything completed successfully.
Screen still black ?
2013/05/17
Offline
Hi Phil
could you please explain what did you do to open the tablet ? im looking at mine all around and cannot find any visible points to start working on 
thanks a lot
Juanjo
Moderator
Firmware Guru
2012/01/05
Offline
try to flash an older firmware, using the restore option
2012/12/27
Offline
globula_neagra said
try to flash an older firmware, using the restore option
What firmware would you suggest ?
admin
2010/09/11
Offline
I've uploaded the initial 1.0 firmware for the Cube U9GT5 (RK3066 based version) :
If you like our web site, applications and firmwares, feel free to support our site. Donations are used to pay the bills for our server hosting costs, development tools and purchase new tablets to support.
2012/12/27
Offline
Finally had a bit of time last night so flashed 1.0 firmware for the Cube U9GT5 (RK3066 based version)
Flash completed successfully in Rockchip Batch Tool 1.5
But still nothing on the display
What is my next move, anyone, my daughter is really upset.
2012/12/27
Offline
juanjo1024 said
Hi PhilÂ
could you please explain what did you do to open the tablet ? im looking at mine all around and cannot find any visible points to start working on
Â
thanks a lot
Juanjo
If you have one of the iphone opening kits, use the plectrum or other thin wedge and insert between metal back and plastic screen bezel. Work your way around case and it should start to lift. Once it is apart enough ease open with your fingers. Just be careful with the volume and power buttons when putting back together.
Regards
Phil
2013/05/17
Offline
philjg66 said
juanjo1024 said
Hi PhilÂ
could you please explain what did you do to open the tablet ? im looking at mine all around and cannot find any visible points to start working on
Â
thanks a lot
Juanjo
If you have one of the iphone opening kits, use the plectrum or other thin wedge and insert between metal back and plastic screen bezel. Work your way around case and it should start to lift. Once it is apart enough ease open with your fingers. Just be careful with the volume and power buttons when putting back together.
Regards
Phil
Â
thanks a lot Phil, im gonna get one of those kits
Juanjo
Most Users Ever Online: 749
Currently Online: MINIX2021
115 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (98), Phone (18)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
beelink
TheMentor
smalec
marek.test@gmail.com
MINIX2021
extendedtn
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix
