Forum switched to read-only as of 2020/06/01
| Latest product reviews |
|---|
 |
 |
Smartphones  |
TV Connect  |
 |
Register
Log In
HomeClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
 Please donate to support OMA and CrewRKTablets firmware work, thank you !
2013/07/18
Offline
hello
my cube came from the factory with a version of sw 2.03 Android 4.2.2
on the back cover there is written that the model is 32 gb
but I read in the settings:
internal memory space totate: 1.97 gb
nand flash, total space: 12.60 GB
might be a firmware problem?
how can I check if there is unpartitioned space?
thanks
Moderator
Firmware Guru
2012/01/05
Offline
Try to re-flash the tablet, if that does not clear the problem, you should contact the seller.
You need to know also that the 32 Gb is used also for storing the Android OS composing from the bootloader, system.img, recovery, back-up, boot.img, cache, data, all these take around 4/5 Gb from the 32 Gb storage.
2013/07/18
Offline
thanks for the reply.
I have already tried a factory reset but it did not solve.
I try now to flash, but with the original firmware or a custom version?
I thought the NAND flash contained everything, but 12 gb remaining are very few ...
2013/07/17
Offline
I think you have a 16 gb motherboard with a 32 gb cover contact your dealer...
2013/07/18
Offline
animehq said
I think you have a 16 gb motherboard with a 32 gb cover contact your dealer...
thanks for the reply
how could I be sure of this?
opening the tablet?
2013/07/17
Offline
If you open the tablet you will lost the warranty and i not sur you could see any difference between 16 and 32 gb pcb...
2013/07/18
Offline
animehq said
If you open the tablet you will lost the warranty and i not sur you could see any difference between 16 and 32 gb pcb...
ok thanks
if I try to flash I lose my warranty?
where can I find the original firmware?
thanks
2013/07/17
Offline
Not sur ask your dealer about that.
Need to know what is your original firmware to answer.
But at least you could backup your actual firmware and restore him later.
1)Juste flash cmw without touching at the rest of the partitions.
2) Backup your actual firmware to a sdcard
3) remove the sdcard and flash the firmware of your choice
4) if you want to restore your firmware reflash cmw and restore him
5) juste reflash stock recovery so nobody can tell the tablet was flashed to another firmware
2013/07/18
Offline
animehq said
Not sur ask your dealer about that.Need to know what is your original firmware to answer.
But at least you could backup your actual firmware and restore him later.
1)Juste flash cmw without touching at the rest of the partitions.
2) Backup your actual firmware to a sdcard
3) remove the sdcard and flash the firmware of your choice
4) if you want to restore your firmware reflash cmw and restore him
5) juste reflash stock recovery so nobody can tell the tablet was flashed to another firmware
Â
thanks animehqÂ
for flash cmw  theres a guide/tutorial or a old thread?
thanksÂ
2013/07/17
Offline
The following users say thank you to animehq for this useful post:
rickee2013/07/18
Offline
the cube support wrote:
We sent the cube u30gt2 32GB for you .
Please finish update firmware from http://www.51cube.com/ch/DownShow.asp?ID=150
Maybe some apps in it .
Please finish updated firmware to solve the problem .
For updated firmware guide ,please check the link about http://www.youtube**.com/watch?v=op2RxeBipw4
and http://www.cube-tablet.com/news/cube-tablet-pc-upgrade-tutorial/
I tried to update firmware 1.05
Moderator
Firmware Guru
2012/01/05
Offline
2013/07/18
Offline
globula_neagra said
did you used the RESTORE option or UPGRADE ?
the first time I flashed, I used the stock rom 1. 05 and the upgrade button
Then I tried again and the second time I used the stock rom 1. 05 and the restore button
then I tried again using a custom rom and restore the button
2013/07/18
Offline
if I connect the tablet to the PC with the vol + button, the tool rockciph marks the square with the color green and I can still flash
but I've done that three times without changing the result.
This procedure writes a succesfull with 0 fail but then I do not see the logo and does not start Android
Most Users Ever Online: 803
Currently Online:
59 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (49), Phone (10)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
chefnl
samahsher
sesemichel
ibiky
cutierogue
edds1
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix
