Help!!! I can't put the Cube U30GT into Recovery Mode to flash ! - Forum

Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS Smartphones
ARCHOS TV Connect
ARCHOS 101 XS

A A A

Help!!! I can't put the Cube U30GT into Recovery Mode to flash !

Page: 1 2

assusao20

New Member

Forum Posts: 9

Member Since:
2013/01/09

Offline

2013/01/10 - 12:09

Hello, I am new here I bought a new white Cube U30GT-H 16GB from Aliexpress it has JB 4.1.1 v 1.09

The Tablet its good and very fast except the damn wifi I can't connect to the router from a far distance even i have 3 or 2 bar you must stay close to it

I have try 2 routers the same thing if there a wall betwin the tablet and th router the internet it will be unstable sometimes connect and sometimes the wifi start try connecting

so i want to upgrade to new version on Cube website or to the Cube U30GT-H rooted firmware in here

when i start to try to put the talet into the recovey mode to flash by pressing power and + nothing happen and the pc never reconize a new hardware like all people happen with them when i conect the usb to pc the tablet turing on by her self then I press power and + it will trrning off and nothing happen , and if i let the tablet on in the RKBatchTool (device connected) is give me pink color not green ?!

do i missing somthing ? and what is that problem of wifi ?do you guys have this problem ?!!

please I am going crazy !!

assusao20

New Member

Forum Posts: 9

Member Since:
2013/01/09

Offline

2013/01/10 - 14:57

Any one can help please I want to root My tablet please !!

globula_neagra

Birmingham

Moderator

Firmware Guru

Forum Posts: 2424

Member Since:
2012/01/05

Offline

Thanks Received: 264

2013/01/10 - 16:33

do you know how to use adb ?

THE FLASH/UNBRICK PROJECT

assusao20

New Member

Forum Posts: 9

Member Since:
2013/01/09

Offline

2013/01/10 - 17:32

hello , thank you for responding

what is adb ??

please explane

about my problem is that possible the issue from the cable that come with the tablet ?!

Mutts

Netherlands

Member

Forum Posts: 15

Member Since:
2012/12/21

Offline

Thanks Received: 1

2013/01/10 - 18:30

I would love to know how to do this too.

Tried several times to get my U30GT mini into flash mode.

But it will not work, it iether starts up normally or it stays off.

As for ADB i think these are drivers for USB?

I recongnize it form flashing my HTC Desire it needed ADB drivers because windows did not see my phone.

So if you mean the ABD drivers how will this work if the Tablet will not go into flash mode from the start?

Thnx for the answer

globula_neagra

Birmingham

Moderator

Firmware Guru

Forum Posts: 2424

Member Since:
2012/01/05

Offline

Thanks Received: 264

2013/01/10 - 19:30

You need first to enable usb debugging, find the drivers
then install android sdk which has included the adb

then use adb with the command adb reboot bootloader

use google to find more info about adb and how to use it
http://www.arctablet.com/blog/devices/arnova/adb-and-fastboot-tutorial/

THE FLASH/UNBRICK PROJECT

assusao20

New Member

Forum Posts: 9

Member Since:
2013/01/09

Offline

2013/01/10 - 20:49

Thank you for responding

so when I will use adb with the command adb reboot bootloader ! it will allow me to enter to the flash mode and use RKBatchTool ? or this is devpoped way to flash the tablet ?

i will try this ; now I am downloading the files !

But why people in all the tutorials not talking about this ?

allways just press power buton and + to get into flash mode !!!

i have tried an other cable the same thing

Thank you any way ..

globula_neagra

Birmingham

Moderator

Firmware Guru

Forum Posts: 2424

Member Since:
2012/01/05

Offline

Thanks Received: 264

2013/01/10 - 21:18

Lets say that this is the last option, and not to many people know about it.

THE FLASH/UNBRICK PROJECT

Mutts

Netherlands

Member

Forum Posts: 15

Member Since:
2012/12/21

Offline

Thanks Received: 1

2013/01/10 - 21:19

Did a litte digging in my BM's and found this link http://forum.xda-developers.com/showthread.php?t=1474956

It might help.

assusao20

New Member

Forum Posts: 9

Member Since:
2013/01/09

Offline

2013/01/12 - 16:53

finally i did it work

you must turn the tablet off

connect the cable to the usb port alone without the tablet

then press + then the power button together when

when you pressing the two buttons connect the micro usb to the tablet

you will hear the sound of new hardware connecting

Release the two butons now..

work on windows xp but on windows 8 does not work for me

jpenzo

New Member

Forum Posts: 2

Member Since:
2012/12/27

Offline

2013/01/12 - 17:30

take car now

because it was ok for me like you

i now i have my u30gth 32gb completly freezed

with the android robot red logo repairing

i have dissambly the tablet to get acces to the bridge

to have the blue logo in rockchip tool but

during the restore it fails to start the loader

please help me !!!

assusao20

New Member

Forum Posts: 9

Member Since:
2013/01/09

Offline

2013/01/13 - 10:30

jpenzo said
take car now

because it was ok for me like you

i now i have my u30gth 32gb completly freezed

with the android robot red logo repairing

i have dissambly the tablet to get acces to the bridge

to have the blue logo in rockchip tool but

during the restore it fails to start the loader

please help me !!!

sont update your tablet from the front USB it will not work

update it from the back usb ...

Mutts

Netherlands

Member

Forum Posts: 15

Member Since:
2012/12/21

Offline

Thanks Received: 1

2013/01/14 - 13:44

"assusao20 said
finally i did it work

..
work on windows xp but on windows 8 does not work for me"

Yes it seems the Cube drivers do not work well under windows 8

My Tab does go into recovery but it won't show up in the rockchip batch tool.

A quick look at the device manager shows the U30GT driver and the message it does not work properly. Seems for windows 8 you need to disable driver signature

See this topic :http://www.arctablet.com/blog/forum/cube-u30gt/usb-driver-for-windows-8/

assusao20

New Member

Forum Posts: 9

Member Since:
2013/01/09

Offline

2013/01/14 - 20:04

"assusao20 said
finally i did it work

..
work on windows xp but on windows 8 does not work for me"

Yes it seems the Cube drivers do not work well under windows 8

My Tab does go into recovery but it won't show up in the rockchip batch tool.

A quick look at the device manager shows the U30GT driver and the message it does not work properly. Seems for windows 8 you need to disable driver signature

See this topic :http://www.arctablet.com/blog/forum/cube-u30gt/usb-driver-for-windows-8/

OK thank you for the information man

Mutts

Netherlands

Member

Forum Posts: 15

Member Since:
2012/12/21

Offline

Thanks Received: 1

2013/01/16 - 15:23

I flashed and successfully updated my CUBE mini to from factory 1.0.3 a rooted 1.0.3 firmware.

I took this route mainly to be sure it would work and it did, although at the end windows XP said the rock batch tool stopped working. The tablet started up correctly and worked.

So I decided to upgrade to the 1.0.5 fw, and there it went wrong, halfway true the update process it all stopped. And now i face the widely now dead android, I can access to recovery menu but that is about all.

Flashing from sd will not work it tells me either that:

Apply update from external storage

E: unknown volume for path []

E: error opening : no such file or directory

E: unknown volume for path []

install from sdcard completeor

update from rk image

Find and check firmware

E: unknown volume for path [/update. img

E: can't mount /update image

Can not found firmware image or invalid image

update rkimage complete.

I have tried all the fw images from 1.0.3 original to the rooted 1.0.5.

None of those are recognized. I have read on this site (cannot find the topic atm) that someone succeeded in flashing from sd. If this will not work is my only option to open up the tablet? Since the current state it is in Win XP wil not see the tablet, so te adb road is not working either.

Any ideas?