dead android robot while updating - Forum

Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS Smartphones
ARCHOS TV Connect
ARCHOS 101 XS

dead android robot while updating

oussss

Member

Forum Posts: 15

Member Since:
2012/12/04

Offline

2012/12/27 - 16:17

While trying to upgrade my tablet firmware "cube u30gt mini", something went wrong, now I am stuck with a dead android robot with alert on his chest, however my windows7 is not recognizing my device ever since, I have tried to copy update.img to the sdcard but the device doesn't read it I used everything in the blue menu and I have changed the sdcard, the usb cable, and didn't work, if anyone has any idea that worth trying please tell, even if it is about opening the device.

globula_neagra

Birmingham

Moderator

Firmware Guru

Forum Posts: 2424

Member Since:
2012/01/05

Offline

Thanks Received: 268

2012/12/28 - 00:33

I can try to recover your tablet via team viewer, check my signature.

THE FLASH/UNBRICK PROJECT

oussss

Member

Forum Posts: 15

Member Since:
2012/12/04

Offline

2012/12/28 - 00:35

Thank you, but I have already fixed it, I disassembled it and shorted the pins 29 30 of the NAND IC and now it works again.

jpenzo

New Member

Forum Posts: 2

Member Since:
2012/12/27

Offline

2013/01/01 - 22:39

Dear Oussss

I have the same problem as you the DeaD android with the Red icon

can you give the procedure of what you did about the 29 - 30 pins ??

thank you

oussss

Member

Forum Posts: 15

Member Since:
2012/12/04

Offline

2013/01/02 - 10:23

Dear jpenzo,
First you need to disassemble your device, the video shows you how to disassemble your device, however, it is for the ugt30 10", nevertheless, it is quite the same for the 7"

device:

Second you have to identify the good IC to short circuit the pins 29 30, the link just below shows you everything, please refer to the reply of "paguamop 11-13-2012, 09:13 PM" you will find 2 pics that help you out with that, those are everything you need, short it while connecting it to the pc and turn it on with volume+ pressed and 29 30 shorted, then the pc will recognize the device, then just restore the firmware from an img file.

http://www.freaktab.com/showthread.php?1688-NEW-900-Supersport-1-1-rooted-ROM-for-Cube-U30GT-Mini&p=33841&viewfull=1#post33841

Hope I helped, with my best regards