Forum switched to read-only as of 2020/06/01
| Latest product reviews |
|---|
 |
 |
Smartphones  |
TV Connect  |
 |
Register
Log In
HomeClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
Please donate to support OMA and CrewRKTablets firmware work, thank you !
2015/06/04
Offline
Hi everyone,
Is it possible to flash Kitkat 4.4.2 in this 10.1in tablet?
Vendor/Download page: http://www.primux.es/producto.aspx?id=238#ctrl2prodes1_lblCaracTit
-Hardware:
RK3188-T
RTL8188ETV
Mali400
Buttons are, vol-, vol+ and power
-Software:
Kernel 3.0.36+
Android 4.2.2
Build rk30sdk-eng 4.2.2 JDQ39 eng.ccz.20131025.0326BU.102426 test-keys
Here is the link of the dump from the vendor update file:
https://www.dropbox.com/sh/bfy7km9eoi6qr05/AAAK8-zjjEHpWhWWZCH9VX2Pa?dl=0
I'll run all the tests you need and give all the feedback.
Thanks =)
2015/06/04
Offline
Here is the dmesg log:
I've flashed a lot of 4.4 roms but i always get a white flash and then black screen. The back light turns on, nothing else happens, when i flash the vendors 4.2.2 update, it boots ok.
Moderator
Firmware Guru
2012/10/06
Offline
Try this build: http://crewrktablets.arctablet.com/?p=3555
Kernel: http://crewrktablets.arctablet.com/?wpfb_dl=2560
Parameter: http://crewrktablets.arctablet.com/?wpfb_dl=2033
Just change the parameter file in folder rockdev and the kernel in folder rockdev/Image before flash.
In CWM do a factory reset and install the 160dpi fix: http://crewrktablets.arctablet.com/?wpfb_dl=2013
- Oma -
The following users say thank you to Oma7144 for this useful post:
JaYmEzPer aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2015/06/04
Offline
Hello,
First of all, thank you Oma for your reply!!
I've used the build cRom v1.4.1 from the first link on your reply, replaced the parameter file on the rockdev folder (renamed it to parameter) and the kernel file in the rocdev/image folder and then opened the RKAndroidTool, the flashing process went ok, but in the end the tablet doesn't get out of the flashing mode, even after i push the reset button it gets back to flashing mode without pressing any other button.
Normally when the flashing process ends the tablet tries to boot.
Moderator
Firmware Guru
2012/10/06
Offline
Did you execute eraseIDB?
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
Moderator
Firmware Guru
2012/10/06
Offline
Ok, found something strange. The kernel from your dump does not have a kernel string. So, it can't boot.
Download again and try: http://crewrktablets.arctablet.com/?wpfb_dl=2560
- Oma -
The following users say thank you to Oma7144 for this useful post:
JaYmEzPer aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2015/06/04
Offline
Now it's working, you did it, thank you very much, when the flashing process ended it booted into the recovery menu, i followed your instructions and rebooted.
First boot took a while, i think it's normal, wifi, sound, buttons ar working well.
From what i've noticed only rotation isn't working.
Here is a picture from the "about this table" page:
Once again you did a great job! You can add this model in the roms page.
Thank you! =)
Moderator
Firmware Guru
2012/10/06
Offline
Fine. Is it just orientation or is the screen not rotating?
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2015/06/04
Offline
The screen was not rotating.
For the rotation problem i've installed the phantom rotation fix and now i can rotate manually, the auto rotation still doesn't work.
Moderator
Firmware Guru
2012/10/06
Offline
Install this via CWM: http://crewrktablets.arctablet.com/?wpfb_dl=2561
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2015/06/04
Offline
Auto rotation is now working well, but the screen orientation is reverse, could this be because of the phantom fix i've installed?
Moderator
Firmware Guru
2012/10/06
Offline
So, 180 degrees wrong? Is it still the same when you set the app to auto?
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2015/06/04
Offline
Yes, it always puts the image in reverse if the app is in auto, if i change to landscape manually in the app it changes to the correct orientation, only changes into reverse in auto rotation mode.
Moderator
Firmware Guru
2012/10/06
Offline
Download again and try: http://crewrktablets.arctablet.com/?wpfb_dl=2561
- Oma -
The following users say thank you to Oma7144 for this useful post:
JaYmEzPer aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2015/06/04
Offline
Once again you did it Oma, after i put in auto mode in the app, auto rotation started working in the correct orientation, thanks a lot!! =)
Just a question, is it normal for the external SD card to appear in the KK, i have to set mount in the CWM?
Thank you!
Most Users Ever Online: 749
Currently Online: Albert_E
93 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (83), Phone (10), Tablet (1)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
kleingizmo
smasosude
llathora
Jessefither
gaelres
Albert_E
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix
