Forum switched to read-only as of 2020/06/01
| Latest product reviews |
|---|
 |
 |
Smartphones  |
TV Connect  |
 |
Register
Log In
HomeClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
Please donate to support OMA and CrewRKTablets firmware work, thank you !
2014/04/25
Offline
Hello everybody and Oma,
The victim:
Quadcore Tablet sold in Australia under Bauhn/Aldi brand. No hope to get an updated Android, especially Kitkat.
Specs:
Original OS: Android 4.2.2
CPU: RK3188T
RAM: 1GB DDR3
FLASH: 16GB
Screen: 9.7 inches, 1024x768
The device has no Volume keys, only Power, Back and Reset pin.
desperately tried to flash a kitkat designed for similar models - no effect. The device doesn't boot at all.
As I am familiar a bit with various RK tools, I've got back to original firmware and I can get dmesg and logs.
In addition, here is "official" 4.2.2 update for that model - http://public.tempoaustralia.com/fw/at-hk97/
The update is a bit dodgy as there is not working the USB Storage mode.
May I ask Oma to try to build the kitkat firmware fot this tablet ? Plenty desperate australians would cry 
thank you.
2014/04/25
Offline
Update,
attached the dmesg and logcat files.
In addition I can provide original firmware stripped to separate images: boot, misc, kernel etc.
Moderator
Firmware Guru
2012/10/06
Offline
Try again to attach the files.
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
Moderator
Firmware Guru
2012/10/06
Offline
Ok, here is the kernel: http://crewrktablets.arctablet.com/?wpfb_dl=1724
Wifi chip is AP6210, which is more typical for sticks. So, we need some testing ...
... try the following builds, only change the kernel:
- http://crewrktablets.arctablet.com/?wpfb_dl=1689
- http://crewrktablets.arctablet.com/?wpfb_dl=1685
- http://crewrktablets.arctablet.com/?wpfb_dl=1642
- http://crewrktablets.arctablet.com/?wpfb_dl=1688, additionally install fix when first boot into CWM: http://crewrktablets.arctablet.com/?wpfb_dl=1569
Instructions are included in the download pack. To start the tab into flash-modus you most likely need to hold Power (or Back) and press Reset.
- Oma -
The following users say thank you to Oma7144 for this useful post:
ELIASPer aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2014/04/25
Offline
Oma,
thank you very much for so rapid response.
Definitely will try to flash mentioned kernel/ROMs and test tonigh at home.
Do I need to re-flash the loader? Current one is 1.24
Btw, to put the device to flashable state I have to power off, then press Power and Back together and hold for 3 seconds. 
2014/04/25
Offline
Hello Oma
Unbelievable, great job!
Tried first 2 ROMs you've provided with kernel.
What I did with each of ROM:
1. Built update.img with replaced kernel provided by you.
2. flashed the update.img
3. when booted to recovery, applied NAND format and Device Specific ZIP provided by you
4. Did FULL format in NAND format.zip utility
5. Choosen "YES" for "Fix SU" when rebooting
Good news:
at least the ROM is booting to desktop!! Yohooo!! Even with original Bauhn logo, LOL.
Working:
Touchscreen
Sound
Both Cameras
Internal Flash Storage
Bad news:
Not working:
WIFI - at all, freezes when choosing "ON"
Bluetooth - continuously trying to turn it on
Dmesg and Logcat attached.
Will try V88 Loader V2 ROM and Original Kitkat for 3188 with your kernel.
UPD: regretfully, no WIFI/BT with any ROM tried. Maybe something is wrong in the kernel?
2014/04/25
Offline
small update...
tried everything I could find - no success with wifi/bt
it seems that MTK module compiled-in brakes 6210 somehow or something else.
Oma, is it possible to get a .config file for the kernel you've provided? I'd like to try to play with compilation by myself.
Thank you.
Moderator
Firmware Guru
2012/10/06
Offline
This is your stock kernel. I don't know nothing about it.
Kernel sources should be provided by the producer of the tab.
- Oma -
The following users say thank you to Oma7144 for this useful post:
ELIASPer aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2014/04/25
Offline
oops, my mistake, confused
ok, will try to crack it, as there is no /proc/configz
thank you very much, anyway
2014/04/25
Offline
Some news.
1. WIFI fixed. Got it after carefull inspection of init....rc on original boot.img and Kitkat's one.
2. Bluetooth - still working, 99% it is also sitting somewhere in boot.img
3. Rotation - have no idea atm, why it's not working properly.
The rotation (maybe g-sensor or accelerometer related) is working 90 degrees to the left, always. I.e. if the tablet is oriented horizontally (landscape) the screen rotates left to vertical (portrait) and vice versa.
In addition, bottom buttons bar in portrait orientation is too wide and Volume+ is not visible.
Does anybody know where I have to look to change some settings? Any advise appretiated.
thank you
2014/01/07
Offline
Dear Elias,
the issue with rotation can be solved by changing your build.prop
Look for "ro.sf.hwrotation=xxx" in your build.prop and try other values like 0 (zero) or 90 or 180 or 270. (i list here all 4 since i dont know the value which you already have inside).
You will see the effect of your change directly after saving the change and reboot.
One negative side effect can be that the bootanimation can appear with wrong orientiation, but one of the values above should make your tab useable when working, without rotation locking.
Regards, Rocker
The following users say thank you to Rock293031 for this useful post:
ELIAS2014/04/25
Offline
Rock293031, thanks a lot and shame on me. I should check original build.prop before raising an issue.
Original one has:
ro.sf.fakerotation=true
ro.sf.hwrotation=270
So, I copied it to Kitkat and rotation works like a charm! Thanks a lot once again.
Now have to fix Bluetooth, working with it, and .. LOL, camera rotation is wrong for both front and rear and the picture stretched a lot.
2014/04/25
Offline
Bluetooth done.
Power on/off ok
Device scanning ok
Pairing, connecting ok
Sound to bluetooth headset ok
Bluetoth file share with Big Brother ok
====================
So, only camera orientation needs to be fixed.
2014/01/07
Offline
Dear Elias,
i have no Wifi and no BT neighter (but Rk903) so i tried to follow your approach to analyze the init.rc scripts from the boot.img.
Can you give me a hint what you changed.
My first try results in a tab in boot-loop.
Thanks and regards, Rock
2014/04/25
Offline
Hello Rock293031,
To enable WIFI:
I've looked into init.rk30board.rc on Kitkat ROM and removed all entries regarding wpa_supplicant and other supplicants, like p2p_ and psp_.
Then I've commented that string in init.rk30board.rc:
#import init.connectivity.rc
to disable all possible mess came with ROM.
Then added, before "on post-fs":
Most Users Ever Online: 749
Currently Online:
130 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (122), Phone (8)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
Gereon2
leysdelacruz712
androiidtweeker
maxkra
leoleo22005
leoleo22004
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix
