Forum switched to read-only as of 2020/06/01


Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS
Smartphones
ARCHOS
TV Connect
ARCHOS 101 XS

A A A
Avatar

Please consider registering
Guest

Search

— Forum Scope —






— Match —





— Forum Options —





Minimum search word length is 3 characters - maximum search word length is 84 characters

Register Lost password?

ClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288

 Please donate to support OMA and CrewRKTablets firmware work, thank you !

sp_Feed sp_TopicIcon
KitKat has landed on rk31board ;-)
If you have some feedback.
Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1386
121
2014/04/11 - 18:31
sp_Permalink sp_Print

Fine. Can you pls install this via CWM http://crewrktablets.arctablet.com/?wpfb_dl=1606 and report on rotation and cam.

 

- Oma -

 

 

Avatar
4WheelSpyder
Active Member
Forum Posts: 41
Member Since:
2014/03/08
sp_UserOfflineSmall Offline

Thanks Received: 1
122
2014/04/12 - 00:36
sp_Permalink sp_Print

Oma7144 said
Fine. Can you pls install this via CWM http://crewrktablets.arctablet.com/?wpfb_dl=1606 and report on rotation and cam.

 

- Oma -

 

 

Done, The tablet now starts up with the Oma animation replaced by crewtablets animation. Screen is fixed 2048 x 1536. No difference in camera operation. Back camera fine camera app crashes when the front camera is selected.

Avatar
Dulindulero
Member
Forum Posts: 11
Member Since:
2013/10/15
sp_UserOfflineSmall Offline
123
2014/04/12 - 12:11
sp_Permalink sp_Print

Hello Oma

 

Thank you for your work. I have a Cube u23GT C4W with rk3188 chip. My android version its 4.1.1 with 3.0.36+ kernel version. I would like to know if this kitkat version would work in my tablet. I have been looking for an update but i did not find.

 

Thank you for the help

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1386
124
2014/04/12 - 13:34
sp_Permalink sp_Print

Pls upload a dmesg log.

 

- Oma -

 

 


Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1386
125
2014/04/12 - 13:37
sp_Permalink sp_Print sp_EditHistory

4WheelSpyder said

  Back camera fine camera app crashes when the front camera is selected.

Try again with this one: http://crewrktablets.arctablet.com/?wpfb_dl=1599

 

- Oma -

Avatar
4WheelSpyder
Active Member
Forum Posts: 41
Member Since:
2014/03/08
sp_UserOfflineSmall Offline

Thanks Received: 1
126
2014/04/12 - 14:42
sp_Permalink sp_Print sp_EditHistory

Oma7144 said

4WheelSpyder said

  Back camera fine camera app crashes when the front camera is selected.

Try again with this one: http://crewrktablets.arctablet.com/?wpfb_dl=1599

 

- Oma -

The camera app is launched but a pop-up screen tells me it cannot connect to the camera. 

 

When hooking the TAB up to my PC I can see the external SD but on the internal memory I only see 3 main directories:

.android_secure

Android

LOST.DIR

It was like this regardless of the FIX file that I flashed.

 

I reflashed the FIX from the previous post and back camera fine, front camera stops the app 

 

 

 

PS I never use the camera but will try some solutions for you if you like to try a few things. 

 

 

Avatar
Dulindulero
Member
Forum Posts: 11
Member Since:
2013/10/15
sp_UserOfflineSmall Offline
127
2014/04/12 - 14:45
sp_Permalink sp_Print sp_EditHistory

<6>[ 0.000000] Initializing cgroup subsys cpu

<5>[ 0.000000] Linux version 3.0.36+ (cb@cb-eyes) (gcc version 4.4.3 (GCC) ) #379 SMP PREEMPT Fri Aug 2 16:27:44 CST 2013

<4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d

<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

<4>[ 0.000000] Machine: RK30board

<6>[ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>

<6>[ 0.000000] memory reserve: Memory(base:0x90f00000 size:9M) reserved for <fb0 buf>

<6>[ 0.000000] memory reserve: Memory(base:0x90700000 size:8M) reserved for <camera_ipp_mem>

<6>[ 0.000000] memory reserve: Total reserved 97M

<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback

<6>[ 0.000000] bootconsole [earlycon0] enabled

<4>[ 0.000000] CPU SRAM: copied sram code from c0bf7000 to fef00100 - fef02520

<4>[ 0.000000] CPU SRAM: copied sram data from c0bf9420 to fef02520 - fef02ca0

<4>[ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q 

<4>[ 0.000000] CLKDATA_MSG: pll_flag = 0x03

<6>[ 0.000000] L310 cache controller enabled

<6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B

<4>[ 0.000000] DDR DEBUG: version 1.00 20130510 

<4>[ 0.000000] DDR DEBUG: DDR3 Device

<4>[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB

<4>[ 0.000000] DDR DEBUG: init success!!! freq=222MHz

<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=180

<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=180

<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x3, DGSL=0 extra clock, DGPS=270

<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=180

<4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0

<4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb

<4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2

<4>[ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)

<7>[ 0.000000] On node 0 totalpages: 237312

<7>[ 0.000000] free_area_init_node: node 0, pgdat c0bf4f00, node_mem_map c16a0000

<7>[ 0.000000] Normal zone: 1744 pages used for memmap

<7>[ 0.000000] Normal zone: 0 pages reserved

<7>[ 0.000000] Normal zone: 196656 pages, LIFO batch:31

<7>[ 0.000000] HighMem zone: 304 pages used for memmap

<7>[ 0.000000] HighMem zone: 38608 pages, LIFO batch:7

<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1ea8000 s6976 r8192 d13504 u32768

<7>[ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096

<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 235264

<5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00140000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00800000@0x00080000(userdata),0x00002000@0x00880000(kpanic),0x00100000@0x00882000(system),-@0x00982000(user) bootver=2013-06-20#1.24 firmware_ver=4.1.1

<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

<6>[ 0.000000] Memory: 775MB 152MB = 927MB total

<5>[ 0.000000] Memory: 919752k/919752k available, 128824k reserved, 155648K highmem

<5>[ 0.000000] Virtual kernel memory layout:

<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)

<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

<5>[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)

<5>[ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)

<5>[ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)

<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

<5>[ 0.000000] .init : 0xc0408000 - 0xc0513000 (1068 kB)

<5>[ 0.000000] .text : 0xc0513000 - 0xc0b890f8 (6617 kB)

<5>[ 0.000000] .data : 0xc0b8a000 - 0xc0bf6d68 ( 436 kB)

<5>[ 0.000000] .bss : 0xc0bfa024 - 0xc169fcf0 (10904 kB)

<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

<6>[ 0.000000] Preemptible hierarchical RCU implementation.

<6>[ 0.000000] NR_IRQS:352

<4>[ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks

<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

<4>[ 0.000000] rk_timer: version 1.2

<6>[ 0.000000] Console: colour dummy device 80x30

<6>[ 0.008670] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)

<6>[ 0.017700] pid_max: default: 32768 minimum: 301

<6>[ 0.022950] Mount-cache hash table entries: 512

<6>[ 0.028486] Initializing cgroup subsys debug

<6>[ 0.033215] Initializing cgroup subsys cpuacct

<6>[ 0.038115] Initializing cgroup subsys freezer

<6>[ 0.043024] CPU: Testing write buffer coherency: ok

<4>[ 0.129371] CPU1: Booted secondary processor

<4>[ 0.169360] CPU2: Booted secondary processor

<4>[ 0.209358] CPU3: Booted secondary processor

<6>[ 0.209387] Brought up 4 CPUs

<6>[ 0.226817] SMP: Total of 4 processors activated (6525.87 BogoMIPS).

<6>[ 0.234118] devtmpfs: initialized

<6>[ 0.243628] NET: Registered protocol family 16

<6>[ 0.248646] last_log: 0xf0100000 map to 0xf7004000 and copy to 0xc0bfe240 (version 2.1)

<4>[ 0.273732] DVFS MSG: AVS Value(index=0): 153 153 153 153 153 153 153 153 153 153 

<6>[ 0.292884] lcdc0 is used as primary display device contoller!

<6>[ 0.299423] lcdc1 is used as external display device controller!

<6>[ 0.406367] rk29sdk_wifi_bt_gpio_control_init: init finished

<6>[ 0.414021] console [ttyFIQ0] enabled, bootconsole disabled

<6>[ 0.423180] Registered FIQ tty driver f003dcc0

<6>[ 0.434912] bio: create slab <bio-0> at 0

<5>[ 0.439347] SCSI subsystem initialized

<6>[ 0.439554] usbcore: registered new interface driver usbfs

<6>[ 0.439668] usbcore: registered new interface driver hub

<6>[ 0.453929] usbcore: registered new device driver usb

<6>[ 0.454363] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter

<6>[ 0.454613] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter

<6>[ 0.454957] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter

<6>[ 0.455093] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter

<6>[ 0.455455] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter

<6>[ 0.485522] rk30-adc rk30-adc: rk30 adc: driver initialized

<4>[ 0.485746] ==cube_misc_init==

<4>[ 0.526883] Alldo Cube Board Info 0003:0002:00a9:4852

<6>[ 0.527014] Advanced Linux Sound Architecture Driver Version 1.0.24.

<6>[ 0.527474] Bluetooth: Core ver 2.16

<6>[ 0.527557] NET: Registered protocol family 31

<6>[ 0.527597] Bluetooth: HCI device and connection manager initialized

<6>[ 0.527652] Bluetooth: HCI socket layer initialized

<6>[ 0.527693] Bluetooth: L2CAP socket layer initialized

<6>[ 0.527748] Bluetooth: SCO socket layer initialized

<4>[ 0.528882] rk fb probe ok!

<4>[ 0.533762] act8846_set_init,line=17

<4>[ 0.533796] act8846_set_init:g_pmic_type=3

<4>[ 0.535592] act8846_set_init act_dcdc1 =1250000mV end

<4>[ 0.537475] act8846_set_init vdd_core =1000000mV end

<4>[ 0.539385] act8846_set_init vdd_cpu =1000000mV end

<4>[ 0.541270] act8846_set_init act_dcdc4 =3100000mV end

<4>[ 0.542518] act8846_set_init act_ldo1 =1000000mV end

<4>[ 0.543664] act8846_set_init act_ldo2 =1200000mV end

<4>[ 0.544809] act8846_set_init act_ldo3 =1800000mV end

<4>[ 0.545955] act8846_set_init act_ldo4 =3100000mV end

<4>[ 0.547101] act8846_set_init act_ldo5 =3100000mV end

<4>[ 0.548246] act8846_set_init act_ldo6 =3100000mV end

<4>[ 0.549398] act8846_set_init act_ldo7 =1800000mV end

<4>[ 0.550544] act8846_set_init act_ldo8 =2800000mV end

<4>[ 0.550593] act8846_set_init,line=78 END

<4>[ 0.550669] i2c-core: driver [act8846] using legacy suspend method

<4>[ 0.550720] i2c-core: driver [act8846] using legacy resume method

<6>[ 0.654295] cfg80211: Calling CRDA to update world regulatory domain

<6>[ 0.878714] Switching to clocksource rk_timer

<6>[ 0.879402] Switched to NOHz mode on CPU #2

<6>[ 0.879417] Switched to NOHz mode on CPU #3

<6>[ 0.879429] Switched to NOHz mode on CPU #1

<4>[ 0.886067] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf709c000

<6>[ 0.888646] Switched to NOHz mode on CPU #0

<4>[ 0.986887] fb0:win0

<4>[ 0.986893] fb1:win1

<4>[ 0.986898] fb2:win2

<4>[ 0.987010] rk3188 lcdc0 clk enable...

<4>[ 1.043964] rk3188 lcdc0 clk disable...

<4>[ 1.068768] fb0:phy:90f00000>>vir:f8000000>>len:0x900000

<4>[ 1.074151] rk_fb_register>>>>>fb0

<4>[ 1.074350] rk_fb_register>>>>>fb1

<4>[ 1.074401] rk3188 lcdc0 clk enable...

<4>[ 1.074447] lcdc0: dclk:63642857>>fps:62 

<6>[ 1.075798] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!

<6>[ 1.100947] lcdc0 wakeup from standby!

<6>[ 1.100985] lcdc0 win0 open,atv layer:1

<4>[ 1.113682] 1032

<4>[ 1.113734] rk3188 lcdc0 probe ok!

<4>[ 1.113831] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf70a8000

<4>[ 1.113912] fb0:win0

<4>[ 1.113917] fb1:win1

<4>[ 1.113922] fb2:win2

<4>[ 1.114010] rk3188 lcdc1 clk enable...

<4>[ 1.139267] rk3188 lcdc1 clk disable...

<4>[ 1.139312] fb2:phy:90f00000>>vir:f8000000>>len:0x900000

<4>[ 1.168294] rk_fb_register>>>>>fb2

<4>[ 1.168495] rk_fb_register>>>>>fb3

<4>[ 1.168530] rk3188 lcdc1 probe ok!

<6>[ 1.178638] NET: Registered protocol family 2

<6>[ 1.178898] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[ 1.179343] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

<6>[ 1.181247] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

<6>[ 1.182372] TCP: Hash tables configured (established 131072 bind 65536)

<6>[ 1.182429] TCP reno registered

<6>[ 1.182464] UDP hash table entries: 512 (order: 2, 16384 bytes)

<6>[ 1.182541] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

<6>[ 1.182904] NET: Registered protocol family 1

<4>[ 1.183135] RK29 Backlight Driver Initialized.

<6>[ 1.183358] Unpacking initramfs...

<6>[ 1.244911] Freeing initrd memory: 1280K

<6>[ 1.245044] PMU: registered new PMU device of type 0

<4>[ 1.254055] rk3188 cpufreq version 2.0, suspend freq 816 MHz

<6>[ 1.254845] Loaded driver for PL330 DMAC-1 rk29-pl330

<6>[ 1.254894] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12

<6>[ 1.255093] Loaded driver for PL330 DMAC-2 rk29-pl330

<6>[ 1.255140] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14

<4>[ 1.282300] highmem bounce pool size: 64 pages

<6>[ 1.282507] ashmem: initialized

<6>[ 1.291160] fuse init (API version 7.16)

<6>[ 1.295880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

<6>[ 1.295947] io scheduler noop registered

<6>[ 1.295985] io scheduler deadline registered

<6>[ 1.296058] io scheduler cfq registered (default)

<6>[ 1.296148] rk610_tv ver 1.0 probe ok

<6>[ 1.319980] rga: Driver loaded succesfully

<4>[ 1.320061] ~~~~~~~~~~~~rk610_hdmi_init

<6>[ 1.331808] rk610_hdmi 4-0046: rk610 hdmi i2c probe ok

<4>[ 1.331884] ~~~~~~~~~~~~rk610_hdcp_init

<4>[ 1.341052] rk_serial.c v1.3 2012-12-14

<6>[ 1.341187] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0

<6>[ 1.508809] rk_serial rk_serial.0: membase 0xf70c0000

<6>[ 1.508885] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3

<6>[ 1.668806] rk_serial rk_serial.3: membase 0xf70c8000

<6>[ 1.669040] Rockchip ion module(version: 1.0) is successfully loaded

<6>[ 1.670562] loop: module loaded

<6>[ 1.670619] Android kernel panic handler initialized (bind=kpanic)

<6>[ 1.671105] PPP generic driver version 2.4.2

<6>[ 1.671260] PPP Deflate Compression module registered

<6>[ 1.671296] PPP BSD Compression module registered

<6>[ 1.703763] PPP MPPE Compression module registered

<6>[ 1.703805] NET: Registered protocol family 24

<6>[ 1.703908] usbcore: registered new interface driver asix

<6>[ 1.703967] usbcore: registered new interface driver cdc_ether

<6>[ 1.704023] usbcore: registered new interface driver dm9620

<6>[ 1.704076] usbcore: registered new interface driver SR9700_android

<6>[ 1.704140] usbcore: registered new interface driver net1080

<6>[ 1.704194] usbcore: registered new interface driver cdc_subset

<6>[ 1.704249] usbcore: registered new interface driver zaurus

<6>[ 1.704295] cdc_ncm: 04-Aug-2011

<6>[ 1.704337] usbcore: registered new interface driver cdc_ncm

<4>[ 1.704374] Rockchip WiFi SYS interface (V1.00) ... 

<6>[ 1.704430] Initializing USB Mass Storage driver...

<6>[ 1.704485] usbcore: registered new interface driver usb-storage

<6>[ 1.704525] USB Mass Storage support registered.

<6>[ 1.704632] usbcore: registered new interface driver usbserial

<6>[ 1.704688] USB Serial support registered for generic

<6>[ 1.704742] usbcore: registered new interface driver usbserial_generic

<6>[ 1.704785] usbserial: USB Serial Driver core

<6>[ 1.704828] USB Serial support registered for GSM modem (1-port)

<6>[ 1.704889] usbcore: registered new interface driver option

<6>[ 1.704926] option: v0.7.2:USB Driver for GSM modems

<6>[ 1.917008] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode

<6>[ 1.917059] usb20_otg usb20_otg: DWC OTG Controller

<6>[ 1.917182] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1

<6>[ 1.917255] usb20_otg usb20_otg: irq 48, io mem 0x00000000

<6>[ 1.917294] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest

<6>[ 1.917380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

<6>[ 1.917428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>[ 1.917479] usb usb1: Product: DWC OTG Controller

<6>[ 1.917512] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd

<6>[ 1.917552] usb usb1: SerialNumber: usb20_otg

<6>[ 1.917899] hub 1-0:1.0: USB hub found

<6>[ 1.917936] hub 1-0:1.0: 1 port detected

<6>[ 1.920596] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000

<6>[ 2.131281] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode

<6>[ 2.131325] usb20_host usb20_host: DWC OTG Controller

<6>[ 2.131410] usb20_host usb20_host: new USB bus registered, assigned bus number 2

<6>[ 2.131479] usb20_host usb20_host: irq 49, io mem 0x00000000

<6>[ 2.131551] DWC_OTG: Init: Port Power? op_state=1

<6>[ 2.131583] DWC_OTG: Init: Power Port (0)

<6>[ 2.131643] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

<6>[ 2.131689] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

<6>[ 2.131736] usb usb2: Product: DWC OTG Controller

<6>[ 2.131768] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd

<6>[ 2.131806] usb usb2: SerialNumber: usb20_host

<6>[ 2.132118] hub 2-0:1.0: USB hub found

<6>[ 2.132152] hub 2-0:1.0: 1 port detected

<6>[ 2.199237] android_usb gadget: Mass Storage Function, version: 2009/09/11

<6>[ 2.199287] android_usb gadget: Number of LUNs=2

<6>[ 2.199327] lun0: LUN: removable file: (no medium)

<6>[ 2.199360] lun1: LUN: removable file: (no medium)

<6>[ 2.199554] android_usb gadget: android_usb ready

<6>[ 2.199763] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0

<6>[ 2.199992] usbcore: registered new interface driver xpad

<6>[ 2.200060] usbcore: registered new interface driver usb_acecad

<6>[ 2.200099] acecad: v3.2:USB Acecad Flair tablet driver

<6>[ 2.200154] usbcore: registered new interface driver aiptek

<6>[ 2.200191] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)

<6>[ 2.200241] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen

<6>[ 2.200308] usbcore: registered new interface driver gtco

<4>[ 2.200346] GTCO usb driver version: 2.00.0006

<6>[ 2.200394] usbcore: registered new interface driver hanwang

<6>[ 2.200451] usbcore: registered new interface driver kbtab

<6>[ 2.200487] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver

<6>[ 2.200558] usbcore: registered new interface driver wacom

<6>[ 2.200594] wacom: v1.52:USB Wacom tablet driver

<4>[ 2.200729] sensor_register_slave:mma8452,id=13

<4>[ 2.200760] sensor_register_slave:lis3dh,id=4

<4>[ 2.200791] sensor_register_slave:l3g4200d,id=32

<6>[ 2.207751] using rtc device, rtc_hym8563, for alarms

<6>[ 2.207808] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0

<6>[ 2.207882] i2c /dev entries driver

<6>[ 2.208343] lirc_dev: IR Remote Control driver registered, major 250 

<6>[ 2.208387] IR NEC protocol handler initialized

<6>[ 2.208417] IR RC5(x) protocol handler initialized

<6>[ 2.208449] IR RC6 protocol handler initialized

<6>[ 2.208479] IR JVC protocol handler initialized

<6>[ 2.208509] IR Sony protocol handler initialized

<6>[ 2.208539] IR RC5 (streamzap) protocol handler initialized

<6>[ 2.208576] IR LIRC bridge handler initialized

<6>[ 2.208605] Linux video capture interface: v2.00

<4>[ 2.208860] def_ref_volt: 1800mV, curr_ref_volt: 1800mV

<6>[ 2.209192] device-mapper: uevent: version 1.0.3

<6>[ 2.209403] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

<6>[ 2.209536] Bluetooth: HCI UART driver ver 2.2

<6>[ 2.209569] Bluetooth: HCI H4 protocol initialized

<6>[ 2.209601] Bluetooth: HCILL protocol initialized

<6>[ 2.209633] Bluetooth: HCI Realtek H5 protocol initialized

<6>[ 2.209706] cpuidle: using governor ladder

<6>[ 2.209734] cpuidle: using governor menu

<6>[ 2.225063] 

<6>[ 2.225066] drivers/mmc/core/core.c...1832.. ===== mmc_rescan Begin....[mmc0]

<6>[ 2.228933] .Line3916..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sd_mmc]

<6>[ 2.229144] .Line3916..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sdio]

<6>[ 2.230211] rk29_sdmmc_change_clk_div..1938.. newDiv=62, newCLK=299Khz [sd_mmc]

<6>[ 2.230302] usbcore: registered new interface driver usbhid

<6>[ 2.230352] usbhid: USB HID core driver

<6>[ 2.259105] logger: created 256K log 'log_main'

<6>[ 2.259207] logger: created 256K log 'log_events'

<6>[ 2.259299] logger: created 256K log 'log_radio'

<6>[ 2.259383] logger: created 256K log 'log_system'

<6>[ 2.259605] input: cube_headset as /devices/platform/cube_headset/input/input1

<4>[ 2.259789] bat vol 693

<6>[ 2.273111] 

<6>[ 2.273114] mmc_attach_sd..1219.. ===== Begin to identify card as SD-card. [mmc0]

<6>[ 2.340732] rk29_sdmmc_change_clk_div..1938.. newDiv=0, newCLK=37125Khz [sd_mmc]

<6>[ 2.340909] mmc0: new high speed SDHC card at address aaaa

<6>[ 2.341466] mmcblk0: mmc0:aaaa SU32G 29.7 GiB 

<6>[ 2.343099] 

<6>[ 2.343107] msdos_partition..461... ==== Begin to parse sdcard-partition. [mmc0]

<6>[ 2.343202] msdos_partition..530... ==== The sdcard has MBR. [mmc0]

<6>[ 2.343273] msdos_partition..543... ==== partition-1, size=31162880KB [mmc0]

<6>[ 2.343349] msdos_partition..571... ==== main partition-1....[mmc0]

<6>[ 2.343419] mmcblk0: p1

<6>[ 2.344144] mmc_rescan_try_freq..1726.. ===== Initialize SD-card successfully. [mmc0]

<6>[ 2.344244] 

<6>[ 2.344250] drivers/mmc/core/core.c...1832.. ===== mmc_rescan Begin....[mmc1]

<6>[ 2.378848] mmc_rescan_try_freq..1670.. ===== reset SDIO. [mmc1]

<6>[ 2.378924] mmc_rescan_try_freq..1674.. ===== reset SDIO Done! [mmc1]

<6>[ 2.382009] mmc_rescan_try_freq..1678.. ===== [mmc1] go idle

<4>[ 2.471595] bat->bat_voltage =3667 bat->bat_status = 3 cap 32

<6>[ 2.471950] rk30_adc_battery: driver initialized

<6>[ 2.472395] input: lightsensor-level as /devices/virtual/input/input2

<4>[ 2.472892] lightsensor cm3202 driver created !

<6>[ 2.497891] asoc: rk610_codec <-> rk29_i2s.1 mapping ok

<6>[ 2.498266] ALSA device list:

<6>[ 2.498290] #0: RK29_RK610

<6>[ 2.498406] GACT probability NOT on

<6>[ 2.498439] Mirror/redirect action on

<6>[ 2.498467] u32 classifier

<6>[ 2.498486] Actions configured

<6>[ 2.498512] Netfilter messages via NETLINK v0.30.

<6>[ 2.498590] nf_conntrack version 0.5.0 (14391 buckets, 57564 max)

<6>[ 2.498968] ctnetlink v0.93: registering with nfnetlink.

<6>[ 2.499034] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

<6>[ 2.499082] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

<6>[ 2.499405] xt_time: kernel timezone is -0000

<6>[ 2.499571] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[ 2.499758] arp_tables: (C) 2002 David S. Miller

<6>[ 2.499827] TCP cubic registered

<6>[ 2.499851] Initializing XFRM netlink socket

<6>[ 2.500250] NET: Registered protocol family 10

<6>[ 2.500877] Mobile IPv6

<6>[ 2.500919] ip6_tables: (C) 2000-2006 Netfilter Core Team

<6>[ 2.501063] IPv6 over IPv4 tunneling driver

<6>[ 2.501648] NET: Registered protocol family 17

<6>[ 2.501700] NET: Registered protocol family 15

<6>[ 2.708883] Bluetooth: RFCOMM TTY layer initialized

<6>[ 2.708948] Bluetooth: RFCOMM socket layer initialized

<6>[ 2.708989] Bluetooth: RFCOMM ver 1.11

<6>[ 2.709015] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[ 2.709051] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[ 2.709199] NET: Registered protocol family 35

<6>[ 2.709364] [BT_RFKILL]: Enter rfkill_rk_init

<6>[ 2.709439] [BT_RFKILL]: Request irq for bt wakeup host

<6>[ 2.709489] [BT_RFKILL]: ** disable irq

<6>[ 2.738788] [BT_RFKILL]: bt shut off power

<4>[ 2.758789] headset 203

<4>[ 2.758816] headset 4s

<6>[ 2.768797] [BT_RFKILL]: rk903_26M device registered.

<6>[ 2.773893] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

<5>[ 2.773987] Registering SWP/SWPB emulation handler

<6>[ 2.774512] ddrfreq: verion 2.2

<6>[ 2.774539] ddrfreq: normal 396MHz video 0MHz idle 0MHz suspend 198MHz reboot 222MHz

<4>[ 2.775722] ==tp_detect_init==

<4>[ 2.775772] ====tp_detect_probe begin=====.  

<4>[ 2.776820] rk3066b-camera version: v0.2.31 Zoom by ipp

<3>[ 2.812750] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...

<3>[ 2.813189] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...

<3>[ 2.813625] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...

<3>[ 2.813664] 

<3>[ 2.813667] ov5640 write reg(0x3008, val:0x80) failed, try to write again!

<3>[ 2.814112] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...

<3>[ 2.814548] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...

<3>[ 2.814985] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...

<3>[ 2.815023] 

<3>[ 2.815025] ov5640 write reg(0x3008, val:0x80) failed, try to write again!

<3>[ 2.815469] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...

<3>[ 2.815904] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...

<3>[ 2.816340] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...

<3>[ 2.816378] 

<3>[ 2.816380] ov5640 write reg(0x3008, val:0x80) failed, try to write again!

<3>[ 2.816426] soft reset ov5640 failed

<3>[ 2.816492] camera 33-0-ov5640_back: Probe ov5640_back failed

<4>[ 2.858811] Begin goodix i2c test,tp count is 5

<3>[ 2.860982] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...

<3>[ 2.861139] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...

<3>[ 2.861435] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...

<3>[ 2.861593] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...

<3>[ 2.861747] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...

<3>[ 2.861901] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...

<3>[ 2.862055] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...

<3>[ 2.862211] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...

<3>[ 2.862363] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...

<3>[ 2.878919] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...

<3>[ 2.879073] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...

<3>[ 2.879227] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...

<3>[ 2.879381] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...

<3>[ 2.879534] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...

<3>[ 2.879687] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...

<3>[ 2.879841] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 2...

<3>[ 2.879996] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 1...

<3>[ 2.880148] i2c i2c-2: No ack, Maybe slave(addr: 0x41) not exist or abnormal power-on, retry 0...

<4>[ 2.898797] Warnning: 0x41 is wrong addr!

<3>[ 2.898937] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...

<3>[ 2.899091] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...

<3>[ 2.899246] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...

<3>[ 2.899400] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...

<3>[ 2.899554] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...

<3>[ 2.899708] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...

<3>[ 2.899862] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...

<3>[ 2.900015] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...

<3>[ 2.900177] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...

<3>[ 2.918913] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...

<3>[ 2.919068] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...

<3>[ 2.919222] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...

<3>[ 2.919377] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...

<3>[ 2.919530] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...

<3>[ 2.919685] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...

<3>[ 2.919838] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...

<3>[ 2.919993] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...

<3>[ 2.920146] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...

<4>[ 2.938788] Warnning: 0x38 is wrong addr!

<3>[ 2.938931] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...

<3>[ 2.939085] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...

<3>[ 2.939238] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...

<3>[ 2.939391] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...

<3>[ 2.939545] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...

<3>[ 2.939698] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...

<3>[ 2.939853] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...

<3>[ 2.940006] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...

<3>[ 2.940160] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...

<3>[ 2.958931] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...

<3>[ 2.959085] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...

<3>[ 2.959239] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...

<3>[ 2.959393] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...

<3>[ 2.959547] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...

<3>[ 2.959699] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...

<3>[ 2.959853] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 2...

<3>[ 2.960007] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 1...

<3>[ 2.960160] i2c i2c-2: No ack, Maybe slave(addr: 0x5d) not exist or abnormal power-on, retry 0...

<4>[ 2.968814] Probe gc0308_front success

<4>[ 2.978798] Warnning: 0x5d is wrong addr!

<4>[ 2.978950] =====addr 0x14 tp i2c test ok=======

<4>[ 2.978980] ==tp_detect_probe over =

<6>[ 2.979038] i2c i2c-0: sensor_probe: gs_mma8452,0xf020ca00

<3>[ 2.979294] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 2...

<3>[ 2.979556] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 1...

<3>[ 2.979818] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 0...

<3>[ 2.980080] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 2...

<3>[ 2.980351] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 1...

<3>[ 2.980612] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 0...

<3>[ 2.980871] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 2...

<3>[ 2.981130] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 1...

<3>[ 2.981388] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 0...

<4>[ 2.981427] sensor_chip_init:fail to read gs_mma8452 devid:0xff

<3>[ 2.981455] i2c i2c-0: sensor_probe failed -11

<3>[ 2.981460] 

<4>[ 2.981487] sensors: probe of 0-001d failed with error -11

<6>[ 2.981518] i2c i2c-0: sensor_probe: gs_lis3dh,0xf020cc00

<4>[ 2.981772] sensor_chip_init:gs_lis3dh:devid=0x33,ops=0xc0bd62c0

<6>[ 2.983960] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-0019/input/input3

<4>[ 2.984135] sensor_irq_init:use irq=175

<4>[ 2.986336] sensor_misc_device_register:miscdevice: mma8452_daemon

<4>[ 2.986367] sensor_probe:initialized ok,sensor name:lis3dh,type:1,id=4

<4>[ 2.986373] 

<3>[ 2.986419] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...

<6>[ 2.986473] i2c i2c-0: sensor_probe: l3g4200d_gryo,0xf020ce00

<3>[ 2.986592] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...

<3>[ 2.986723] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 2...

<3>[ 2.986770] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...

<3>[ 2.986809] 

<3>[ 2.986811] ov2659 write reg(0x103, val:0x1) failed, try to write again!

<3>[ 2.986989] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...

<3>[ 2.987084] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 1...

<3>[ 2.987160] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...

<3>[ 2.987332] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...

<3>[ 2.987374] 

<3>[ 2.987376] ov2659 write reg(0x103, val:0x1) failed, try to write again!

<3>[ 2.987433] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 0...

<3>[ 2.987555] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...

<3>[ 2.987696] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 2...

<3>[ 2.987740] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...

<3>[ 2.987912] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...

<3>[ 2.987951] 

<3>[ 2.987953] ov2659 write reg(0x103, val:0x1) failed, try to write again!

<3>[ 2.987997] soft reset ov2659 failed

<3>[ 2.988066] camera 33-2-ov2659_back_1: Probe ov2659_back_1 failed

<3>[ 2.988180] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 1...

<3>[ 2.988442] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 0...

<3>[ 2.988702] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 2...

<3>[ 2.990988] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 1...

<3>[ 2.991110] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...

<3>[ 2.991251] i2c i2c-0: No ack, Maybe slave(addr: 0x6b) not exist or abnormal power-on, retry 0...

<4>[ 2.991294] sensor_chip_init:fail to read l3g4200d_gryo devid:0xff

<3>[ 2.991322] i2c i2c-0: sensor_probe failed -11

<3>[ 2.991326] 

<4>[ 2.991354] sensors: probe of 0-006b failed with error -11

<6>[ 2.991406] sensor_init: Probe name sensors

<4>[ 2.991426] sensor-dev.c v1.2 add akm8963 support 2013-3-10

<3>[ 2.991465] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...

<3>[ 2.991639] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...

<3>[ 2.991677] 

<3>[ 2.991679] ov2659 write reg(0x103, val:0x1) failed, try to write again!

<3>[ 2.991856] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...

<3>[ 2.992025] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...

<3>[ 2.992195] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...

<3>[ 2.992233] 

<3>[ 2.992236] ov2659 write reg(0x103, val:0x1) failed, try to write again!

<3>[ 2.992412] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...

<6>[ 2.992489] rtc_hym8563 1-0051: setting system clock to 2014-04-12 12:34:47 UTC (1397306087)

<6>[ 2.992729] Freeing init memory: 1068K

<3>[ 2.992777] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...

<3>[ 2.992953] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...

<3>[ 2.992991] 

<3>[ 2.992993] ov2659 write reg(0x103, val:0x1) failed, try to write again!

<3>[ 2.993038] soft reset ov2659 failed

<3>[ 2.993109] camera 33-3-ov2659_front_1: Probe ov2659_front_1 failed

<3>[ 3.053646] init: /init.rk30board.rc: 91: invalid command 'mknod'

<3>[ 3.053717] init: /init.rk30board.rc: 125: invalid service name 'mt6620_supplicant'

<4>[ 3.054199] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.

<6>[ 3.085547] keychord: using input dev rk29-keypad for fevent

<4>[ 3.088368] fb0 check_var fail 2!!! 

<4>[ 3.088375] xoffset:0>>xres:1024>>xres_vir:1024

<4>[ 3.088381] yoffset:1>>yres:768>>yres_vir:768

<4>[ 3.258791] headset 450

<4>[ 3.258811] headset removed

<4>[ 3.310830] gp_rknand_info = : 0xef0fa300

<4>[ 3.310894] rk30_chip_set:1 

<4>[ 3.310933] request IRQ_NANDC irq , ret=0.........

<4>[ 3.310964] FTL INFO:Version = 438,Date = 20130620

<4>[ 3.311026] FlashCopyProgBuf1=0xc1544000

<4>[ 3.311063] ATime: 40 ns AHB: 148 timming: 1081

<4>[ 3.311088] No.1 FLASH INFO:ad de 94 eb 74

<4>[ 3.311112] No.3 FLASH INFO:ad de 94 eb 74

<4>[ 3.311453] ATime: 32 ns AHB: 148 timming: 1061

<4>[ 3.311632] ATime: 32 ns AHB: 148 timming: 1061

<4>[ 3.311653] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00a9a8

<4>[ 3.389022] totalLogicBlkRaw = 3940

<4>[ 3.389049] gBootMedia = 1 gSdmmcFwPartOffset =0!

<4>[ 3.389073] rknand_buffer.c version: 4.38 20121130!

<5>[ 3.389181] 10 cmdlinepart partitions found on MTD device rk29xxnand

<5>[ 3.389213] Creating 10 MTD partitions on "rk29xxnand":

<5>[ 3.389242] 0x000000400000-0x000000800000 : "misc"

<5>[ 3.390131] 0x000000800000-0x000001000000 : "kernel"

<5>[ 3.390840] 0x000001000000-0x000002000000 : "boot"

<5>[ 3.391531] 0x000002000000-0x000004000000 : "recovery"

<5>[ 3.392240] 0x000004000000-0x000008000000 : "backup"

<5>[ 3.392976] 0x000008000000-0x000010000000 : "cache"

<5>[ 3.393761] 0x000010000000-0x000110000000 : "userdata"

<5>[ 3.397434] 0x000110000000-0x000110400000 : "kpanic"

<6>[ 3.399352] apanic: Bound to mtd partition 'kpanic'

<6>[ 3.399377] apanic: No panic data available

<5>[ 3.399525] 0x000110400000-0x000130400000 : "system"

<5>[ 3.400619] 0x000130400000-0x0003d9000000 : "user"

<4>[ 3.409060] startBlk = 48 sysProtAddr = 47 

<6>[ 3.470821] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc

<3>[ 3.470927] init: cannot find '/sbin/readahead', disabling 'readahead'

<6>[ 3.553859] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc

<6>[ 3.664632] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc

<4>[ 3.680836] UMP: UMP device driver loaded

<4>[ 3.707652] Mali: Mali400 inside of rk3188!

<4>[ 3.707679] Mali: mali freq table num : 6 

<4>[ 3.707700] Mali: mali freq table :Mali: 128,Mali: 179,Mali: 223,Mali: 297,Mali: 297,Mali: 446,Mali: 

<4>[ 3.707765] Mali: init mali clock success 

<4>[ 3.713198] Mali: @@@@@@@Mali device driver loaded success@@@@@@@@

<4>[ 3.715424] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.

<4>[ 3.716249] ipp irq 47

<4>[ 3.716541] IPP init, version rk30-ipp 1.003

<3>[ 3.813937] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'

<3>[ 3.844402] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'

<3>[ 4.193241] init: cannot find '/system/bin/hald', disabling 'hald'

<3>[ 4.193480] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'

<4>[ 4.324516] vpu: power on

<6>[ 4.324586] VPU_SERVICE: checking hw id 4831

<4>[ 4.325450] vpu: power off...done

<6>[ 4.325494] VPU_SERVICE: init success

<3>[ 4.330884] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'

<3>[ 4.330931] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'

<3>[ 4.331234] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead

<4>[ 4.398067] <<-GTP-INFO->> GT911 driver install.

<4>[ 4.399160] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in

<4>[ 4.399241] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY

<4>[ 4.399282] [rknand_sys_storage_ioctl:365] return ret = 0

<4>[ 4.399335] <<-GTP-INFO->> GTP Driver Version:V1.2<2012/10/25>

<4>[ 4.399382] <<-GTP-INFO->> GTP Driver build@18:58:46,Mar 27 2013

<4>[ 4.399412] <<-GTP-INFO->> GTP I2C Address:0x14

<6>[ 4.469881] .416.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]

<6>[ 4.469917] .447.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]

<3>[ 4.481194] android_usb: already disabled

<6>[ 4.489238] adb_open

<6>[ 4.497742] .416.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]

<6>[ 4.498135] .416.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]

<3>[ 4.529242] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 4.529491] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 4.529722] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 4.529950] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 4.530175] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 4.530401] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 4.530627] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 4.530852] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 4.531077] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 4.531303] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 4.531528] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 4.531754] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 4.531980] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 4.532204] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 4.532429] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<4>[ 4.648810] <<-GTP-ERROR->> GTP i2c test failed time 1.

<4>[ 4.669006] <<-GTP-INFO->> Ready to run update thread.

<6>[ 4.698980] input: Goodix Capacitive TouchScreen as /devices/virtual/input/input4

<4>[ 4.699288] <<-GTP-INFO->> GTP works in interrupt mode.

<4>[ 4.700435] <<-GTP-INFO->> IC VERSION:9110_1030

<4>[ 4.700462] <<-GTP-INFO->> Applied memory size:2562.

<4>[ 4.700503] <<-GTP-INFO->> Create proc entry success!

<3>[ 5.386101] gc0308 sensor_ioctl cmd(0x3) is unknown !

<4>[ 5.603881] rk fb use 3 buffers

<3>[ 7.679389] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 7.679959] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 7.681244] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 7.682006] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 7.682706] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 7.683399] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 7.684090] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 7.684779] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 7.685465] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 7.686151] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 7.686835] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 7.687501] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<3>[ 7.688168] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 2...

<3>[ 7.688883] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 1...

<3>[ 7.689479] i2c i2c-2: No ack, Maybe slave(addr: 0x14) not exist or abnormal power-on, retry 0...

<4>[ 7.809272] <<-GTP-ERROR->> I2C transfer error. errno:-11

<4>[ 7.809285]  

<4>[ 7.854137] <<-GTP-ERROR->> Don't meet the third condition.

<4>[ 7.854279] <<-GTP-ERROR->> [update_proc]check update file fail.

<6>[ 10.168823] DWC_OTG: dwc_otg_hcd_enable, disable host controller

<4>[ 10.478976] rk30_adc_battery_load_capacity: open file /cache/bat_last_capacity.dat success

<4>[ 10.689789] CPower on capacity = 21, new_capacity = 32, old_capacity = 21 vol 3667 status 3

<4>[ 10.689854] BPower on capacity = 21, new_capacity = 32, old_capacity = 21 vol 3667 status 3

<4>[ 10.690055] battery reported 21

<6>[ 11.488526] warning: `zygote' uses 32-bit capabilities (legacy support in use)

<4>[ 18.688862] tmpcap 21 cap 21 min_dis 45

<4>[ 23.688911] tmpcap 21 cap 21 min_dis 45

<4>[ 24.688924] tmpcap 20 cap 21 min_dis 45

<4>[ 25.688928] tmpcap 20 cap 21 min_dis 45

<4>[ 26.688926] tmpcap 20 cap 21 min_dis 45

<4>[ 27.688848] tmpcap 20 cap 21 min_dis 45

<6>[ 28.488901] [BT_RFKILL]: bt turn on power

<4>[ 28.688953] tmpcap 20 cap 21 min_dis 45

<4>[ 29.688872] tmpcap 20 cap 21 min_dis 45

<4>[ 30.688867] tmpcap 19 cap 21 min_dis 45

<4>[ 31.043250] =======================================================

<4>[ 31.048961] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====

<4>[ 31.049042] =======================================================

<4>[ 31.049113] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.26) init.

<4>[ 31.049176] dhd_module_init: Enter

<4>[ 31.049219] =========== WLAN placed in POWER ON ========

<3>[ 31.049391] ANDROID-ERROR) ## wifi_probe

<3>[ 31.049462] ANDROID-ERROR) wifi_set_power = 1

<6>[ 31.049518] rk29sdk_wifi_power: 1

<6>[ 31.115672] acc_open

<6>[ 31.115740] acc_release

<6>[ 31.341589] wifi turn on power

<3>[ 31.344738] ANDROID-ERROR) wifi_set_carddetect = 1

<6>[ 31.349713] rk29sdk_wifi_set_carddetect:1

<6>[ 31.353934] mmc1: slot status change detected(0-1)

<6>[ 31.358911] rk29_sdmmc_change_clk_div..1938.. newDiv=25, newCLK=297Khz [sdio]

<4>[ 31.368905] Linux Kernel SDIO/MMC Driver

<4>[ 31.373214] 

<4>[ 31.373221] Dongle Host Driver, version 5.90.195.26.1.9

<4>[ 31.373237] Compiled in drivers/net/wireless/bcmdhd on Feb 20 2013 at 18:24:23

<6>[ 31.558900] 

<6>[ 31.558908] drivers/mmc/core/core.c...1832.. ===== mmc_rescan Begin....[mmc1]

<6>[ 31.598850] mmc_rescan_try_freq..1670.. ===== reset SDIO. [mmc1]

<4>[ 31.605506] rk29_sdmmc_command_complete..2909...CMD52(arg=0xc00), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<4>[ 31.616772] rk29_sdmmc_command_complete..2909...CMD52(arg=0x80000c08), hoststate=1, errorTimes=1, errorStep=0x1e ! [sdio]

<6>[ 31.627928] mmc_rescan_try_freq..1674.. ===== reset SDIO Done! [mmc1]

<6>[ 31.638227] mmc_rescan_try_freq..1678.. ===== [mmc1] go idle

<6>[ 31.644505] 

<6>[ 31.644510] mmc_attach_sdio..801.. ===== Begin to identify card as SDIO-card. [mmc1]

<7>[ 31.666726] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

<7>[ 31.668835] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

<7>[ 31.670837] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

<7>[ 31.674692] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

<4>[ 31.688855] tmpcap 18 cap 21 min_dis 45

<6>[ 31.738939] rk29_sdmmc_change_clk_div..1938.. newDiv=0, newCLK=14850Khz [sdio]

<6>[ 31.741701] mmc1: new high speed SDIO card at address 0001

<4>[ 31.742841] FW_PATH = /system/etc/firmware/fw_RK903.bin

<4>[ 31.742862] NVRAM_PATH = /system/etc/firmware/nvram_RK903_26M.cal

<4>[ 31.743191] F1 signature read @0x18000000=0x16044330

<4>[ 31.834236] DHD: dongle ram size is set to 294912(orig 294912)

<4>[ 31.835533] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/firmware/fw_RK903b2.bin

<4>[ 31.847695] wl_create_event_handler thr:181 started

<4>[ 31.849612] wl_iw_attach thr:182 started

<4>[ 31.849790] wl_iw_bt_init thr:183 started

<4>[ 31.850730] dhd_attach thr:184 started

<4>[ 31.850910] dhd_attach thr:185 started

<4>[ 31.850999] dhd_attach thr:186 started

<3>[ 31.852400] ANDROID-ERROR) wifi_get_mac_addr

<4>[ 31.852467] Fianl fw_path=/system/etc/firmware/fw_RK903b2.bin

<4>[ 31.852520] Fianl nv_path=/system/etc/firmware/nvram_RK903_26M.cal

<4>[ 32.033233] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.

<3>[ 32.207368] ANDROID-ERROR) wifi_get_mac_addr

<4>[ 32.210446] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:22:f4:ff:c6:bb

<4>[ 32.281731] dhd_preinit_ioctls set keeplive failed -1

<4>[ 32.299346] dhd_rx_frame: net device is NOT registered yet. drop packet

<4>[ 32.300657] dhd_rx_frame: net device is NOT registered yet. drop packet

<4>[ 32.301299] Firmware version = wl0: Jul 15 2012 12:54:29 version 5.90.195.26.3 FWID 01-d0094437

<4>[ 32.303192] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:22:f4:ff:c6:bb

<6>[ 32.303327] mmc_rescan_try_freq..1683.. ===== Initialize SDIO successfully. [mmc1]

<4>[ 32.304193] dhd_module_init: Exit

<4>[ 32.688941] tmpcap 17 cap 21 min_dis 45

<4>[ 33.688892] tmpcap 16 cap 21 min_dis 5

<4>[ 33.689108] battery reported 20

<4>[ 34.688901] tmpcap 15 cap 20 min_dis 5

<4>[ 35.688870] tmpcap 15 cap 20 min_dis 5

<4>[ 36.688876] tmpcap 15 cap 20 min_dis 5

<4>[ 37.688953] tmpcap 15 cap 20 min_dis 5

<4>[ 38.688936] tmpcap 15 cap 20 min_dis 5

<4>[ 38.689227] battery reported 19

<4>[ 38.902466] 

<4>[ 38.902478] Dongle Host Driver, version 5.90.195.26.1.9

<4>[ 38.902489] Compiled in drivers/net/wireless/bcmdhd on Feb 20 2013 at 18:24:23

<4>[ 38.930532] dhd_rx_frame: net device is NOT registered yet. drop packet

<4>[ 38.930814] dhd_rx_frame: net device is NOT registered yet. drop packet

<4>[ 39.688913] tmpcap 15 cap 19 min_dis 45

<4>[ 40.688935] tmpcap 15 cap 19 min_dis 45

<4>[ 41.688935] tmpcap 11 cap 19 min_dis 10

<3>[ 42.053283] CFG80211-ERROR) wl_notify_scan_status : scan is not ready 

<4>[ 42.157292] wl_iw_set_essid: join SSID=WLAN_6813 ch=4

<4>[ 42.257226] wl_bss_connect_done succeeded

<4>[ 42.293276] wl_bss_connect_done succeeded

<4>[ 42.689040] tmpcap 10 cap 19 min_dis 5

<4>[ 43.688892] tmpcap 10 cap 19 min_dis 5

<4>[ 43.689112] battery reported 18

<4>[ 44.689104] tmpcap 10 cap 18 min_dis 5

<6>[ 45.379092] .416.. MMC0 receive the message sd-Checking from VOLD.[sd_mmc]

<6>[ 45.400920] .416.. MMC0 receive the message sd-Mounted from VOLD.[sd_mmc]

<4>[ 45.688897] tmpcap 10 cap 18 min_dis 5

<4>[ 46.689207] tmpcap 9 cap 18 min_dis 5

<4>[ 47.688917] tmpcap 10 cap 18 min_dis 5

<3>[ 48.487364] CFG80211-ERROR) wl_notify_scan_status : scan is not ready 

<3>[ 48.494654] CFG80211-ERROR) wl_notify_scan_status : scan is not ready 

<4>[ 48.688892] tmpcap 10 cap 18 min_dis 5

<4>[ 48.689801] battery reported 17

<7>[ 49.588814] wlan0: no IPv6 routers present

<4>[ 49.688851] tmpcap 10 cap 17 min_dis 5

<4>[ 50.689030] tmpcap 11 cap 17 min_dis 5

<4>[ 51.688868] tmpcap 12 cap 17 min_dis 5

<4>[ 52.688856] tmpcap 14 cap 17 min_dis 45

<4>[ 53.688880] tmpcap 15 cap 17 min_dis 45

<4>[ 54.688901] tmpcap 15 cap 17 min_dis 45

<4>[ 55.688910] tmpcap 16 cap 17 min_dis 45

<4>[ 56.688885] tmpcap 16 cap 17 min_dis 45

<4>[ 57.688915] tmpcap 16 cap 17 min_dis 45

<4>[ 58.688913] tmpcap 16 cap 17 min_dis 45

<4>[ 59.689152] tmpcap 16 cap 17 min_dis 45

<3>[ 60.435212] CFG80211-ERROR) wl_notify_scan_status : scan is not ready 

<4>[ 60.688958] tmpcap 16 cap 17 min_dis 45

<4>[ 61.688963] tmpcap 16 cap 17 min_dis 45

<6>[ 70.770519] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 70.781910] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 70.793269] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 70.859567] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 71.640296] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<6>[ 71.658928] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<4>[ 100.688884] tmpcap 19 cap 17 min_dis 45

<4>[ 101.689330] tmpcap 15 cap 17 min_dis 45

<4>[ 102.688850] tmpcap 15 cap 17 min_dis 45

<4>[ 103.689031] tmpcap 14 cap 17 min_dis 45

<4>[ 104.688839] tmpcap 15 cap 17 min_dis 45

<4>[ 105.688900] tmpcap 16 cap 17 min_dis 45

<4>[ 106.688951] tmpcap 16 cap 17 min_dis 45

<4>[ 120.688898] tmpcap 18 cap 17 min_dis 45

<3>[ 120.928647] CFG80211-ERROR) wl_notify_scan_status : scan is not ready 

<4>[ 121.688978] tmpcap 15 cap 17 min_dis 45

<4>[ 187.486615] set_dai_fmt 1

<4>[ 187.487003] srate 0

<6>[ 189.666004] qtaguid: ctrl_counterset(s 1 10078): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 190.660237] init: untracked pid 1944 exited

<3>[ 190.678690] init: untracked pid 1951 exited

<4>[ 190.698946] tmpcap 21 cap 17 min_dis 45

<3>[ 190.765563] init: untracked pid 1956 exited

<3>[ 190.931820] init: untracked pid 1953 exited

<3>[ 190.939424] init: untracked pid 1947 exited

<3>[ 191.041975] init: untracked pid 1958 exited

<3>[ 191.399546] init: untracked pid 1995 exited

<3>[ 191.403571] init: untracked pid 2003 exited

<3>[ 191.679192] init: untracked pid 2007 exited

<3>[ 191.690865] init: untracked pid 2000 exited

<4>[ 191.698887] tmpcap 14 cap 17 min_dis 45

<3>[ 191.705227] init: untracked pid 2018 exited

<3>[ 191.710534] init: untracked pid 2012 exited

<3>[ 191.749577] init: untracked pid 2036 exited

<3>[ 191.777234] init: untracked pid 2024 exited

<3>[ 191.814220] init: untracked pid 2048 exited

<3>[ 191.930211] init: untracked pid 2021 exited

<3>[ 191.944860] init: untracked pid 2015 exited

<3>[ 191.963739] init: untracked pid 2041 exited

<3>[ 192.000769] init: untracked pid 2027 exited

<3>[ 192.029460] init: untracked pid 2052 exited

<6>[ 192.355091] EXT4-fs (mtdblock8): re-mounted. Opts: (null)

<4>[ 192.698953] tmpcap 12 cap 17 min_dis 5

<3>[ 192.795004] init: untracked pid 2111 exited

<3>[ 192.950629] init: untracked pid 2121 exited

<3>[ 192.977530] init: untracked pid 2116 exited

<3>[ 193.081345] init: untracked pid 2114 exited

<3>[ 193.255641] init: untracked pid 2124 exited

<3>[ 193.283329] init: untracked pid 2118 exited

<3>[ 193.334626] init: untracked pid 2157 exited

<3>[ 193.347554] init: untracked pid 2143 exited

<3>[ 193.377679] init: untracked pid 2126 exited

<3>[ 193.459845] init: untracked pid 2163 exited

<3>[ 193.493057] init: untracked pid 2171 exited

<3>[ 193.557845] init: untracked pid 2161 exited

<3>[ 193.576901] init: untracked pid 2153 exited

<3>[ 193.601858] init: untracked pid 2129 exited

<3>[ 193.678260] init: untracked pid 2168 exited

<4>[ 193.698929] tmpcap 12 cap 17 min_dis 5

<3>[ 193.713485] init: untracked pid 2178 exited

<4>[ 194.698956] tmpcap 13 cap 17 min_dis 45

<4>[ 195.519006] rk610 standby 1

<4>[ 195.699059] tmpcap 14 cap 17 min_dis 45

<4>[ 196.698974] tmpcap 15 cap 17 min_dis 45

<4>[ 203.345283] set_dai_fmt 1

<4>[ 203.345625] srate 0

<4>[ 207.577444] set_dai_fmt 1

<4>[ 207.577725] srate 0

<6>[ 208.177198] qtaguid: ctrl_counterset(s 0 10078): insufficient priv from pid=342 tgid=285 uid=1000

<4>[ 218.299103] rk610 standby 1

<4>[ 218.859760] set_dai_fmt 1

<4>[ 218.860102] srate 0

<6>[ 219.133457] qtaguid: ctrl_counterset(s 1 10100): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 220.339922] init: untracked pid 2305 exited

<4>[ 220.699036] tmpcap 23 cap 17 min_dis 45

<4>[ 224.285757] set_dai_fmt 1

<4>[ 224.286034] srate 0

<4>[ 235.309011] rk610 standby 1

<4>[ 248.017920] set_dai_fmt 1

<4>[ 248.018188] srate 0

<6>[ 252.654541] qtaguid: ctrl_counterset(s 0 10100): insufficient priv from pid=342 tgid=285 uid=1000

<4>[ 255.024174] set_dai_fmt 1

<4>[ 255.024459] srate 0

<6>[ 256.407713] qtaguid: ctrl_counterset(s 1 10078): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 257.386204] init: untracked pid 2634 exited

<3>[ 257.458379] init: untracked pid 2639 exited

<3>[ 257.650622] init: untracked pid 2637 exited

<3>[ 257.736444] init: untracked pid 2643 exited

<3>[ 257.973026] init: untracked pid 2651 exited

<3>[ 258.180696] init: untracked pid 2664 exited

<3>[ 258.227032] init: untracked pid 2662 exited

<3>[ 258.407783] init: untracked pid 2669 exited

<3>[ 258.444833] init: untracked pid 2667 exited

<3>[ 258.470787] init: untracked pid 2685 exited

<3>[ 258.476727] init: untracked pid 2716 exited

<3>[ 258.546937] init: untracked pid 2679 exited

<3>[ 258.666627] init: untracked pid 2671 exited

<3>[ 258.693021] init: untracked pid 2691 exited

<3>[ 258.753876] init: untracked pid 2719 exited

<3>[ 258.770823] init: untracked pid 2699 exited

<3>[ 258.787144] init: untracked pid 2683 exited

<3>[ 259.002256] init: untracked pid 2707 exited

<3>[ 259.431212] init: untracked pid 2768 exited

<3>[ 259.500500] init: untracked pid 2781 exited

<3>[ 259.517730] init: untracked pid 2773 exited

<3>[ 259.572897] init: untracked pid 2786 exited

<3>[ 259.681175] init: untracked pid 2771 exited

<3>[ 259.727945] init: untracked pid 2791 exited

<3>[ 259.740563] init: untracked pid 2809 exited

<3>[ 259.755569] init: untracked pid 2783 exited

<3>[ 259.760656] init: untracked pid 2776 exited

<3>[ 259.789537] init: untracked pid 2789 exited

<3>[ 259.972265] init: untracked pid 2813 exited

<3>[ 259.977428] init: untracked pid 2794 exited

<4>[ 260.546720] set_dai_fmt 1

<4>[ 260.547572] srate 0

<4>[ 260.698970] tmpcap 18 cap 17 min_dis 45

<4>[ 268.915091] set_dai_fmt 1

<4>[ 268.915433] srate 0

<4>[ 272.311343] set_dai_fmt 1

<4>[ 272.311709] srate 0

<6>[ 272.793441] qtaguid: ctrl_counterset(s 0 10078): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 273.233128] init: untracked pid 2877 exited

<3>[ 273.238413] init: untracked pid 2882 exited

<3>[ 273.450891] init: untracked pid 2880 exited

<3>[ 273.469283] init: untracked pid 2884 exited

<3>[ 273.712563] init: untracked pid 2903 exited

<3>[ 273.790138] init: untracked pid 2908 exited

<3>[ 273.855962] init: untracked pid 2913 exited

<3>[ 273.900875] init: untracked pid 2928 exited

<3>[ 273.958235] init: untracked pid 2918 exited

<3>[ 273.985230] init: untracked pid 2905 exited

<3>[ 274.053127] init: untracked pid 2911 exited

<3>[ 274.106823] init: untracked pid 2915 exited

<3>[ 274.120859] init: untracked pid 2947 exited

<3>[ 274.159254] init: untracked pid 2933 exited

<3>[ 274.165280] init: untracked pid 2935 exited

<3>[ 274.220985] init: untracked pid 2921 exited

<3>[ 274.402756] init: untracked pid 2949 exited

<3>[ 274.420708] init: untracked pid 2937 exited

<3>[ 274.533342] init: untracked pid 3016 exited

<3>[ 274.563184] init: untracked pid 3008 exited

<3>[ 274.755874] init: untracked pid 3024 exited

<3>[ 274.784624] init: untracked pid 3019 exited

<3>[ 274.818155] init: untracked pid 3012 exited

<3>[ 274.832307] init: untracked pid 3033 exited

<3>[ 274.873591] init: untracked pid 3057 exited

<3>[ 274.880426] init: untracked pid 3038 exited

<3>[ 274.985520] init: untracked pid 3027 exited

<3>[ 275.059114] init: untracked pid 3036 exited

<3>[ 275.098493] init: untracked pid 3060 exited

<3>[ 275.103636] init: untracked pid 3043 exited

<4>[ 276.929739] set_dai_fmt 1

<4>[ 276.930013] srate 0

<6>[ 278.157292] qtaguid: ctrl_counterset(s 1 10078): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 278.891125] init: untracked pid 3125 exited

<3>[ 278.905815] init: untracked pid 3131 exited

<3>[ 279.007069] init: untracked pid 3137 exited

<3>[ 279.144491] init: untracked pid 3128 exited

<3>[ 279.195408] init: untracked pid 3134 exited

<3>[ 279.243962] init: untracked pid 3139 exited

<3>[ 279.594634] init: untracked pid 3169 exited

<3>[ 279.608602] init: untracked pid 3162 exited

<3>[ 279.678389] init: untracked pid 3178 exited

<3>[ 279.781395] init: untracked pid 3187 exited

<3>[ 279.852213] init: untracked pid 3193 exited

<3>[ 279.855830] init: untracked pid 3174 exited

<3>[ 279.859499] init: untracked pid 3165 exited

<3>[ 279.887933] init: untracked pid 3198 exited

<3>[ 279.909563] init: untracked pid 3183 exited

<3>[ 279.938439] init: untracked pid 3206 exited

<3>[ 279.994667] init: untracked pid 3191 exited

<3>[ 280.097692] init: untracked pid 3196 exited

<3>[ 280.111678] init: untracked pid 3201 exited

<3>[ 280.166790] init: untracked pid 3212 exited

<4>[ 280.698995] tmpcap 18 cap 17 min_dis 45

<3>[ 280.993254] init: untracked pid 3289 exited

<3>[ 281.002933] init: untracked pid 3284 exited

<3>[ 281.028259] init: untracked pid 3279 exited

<3>[ 281.064893] init: untracked pid 3294 exited

<3>[ 281.110981] init: untracked pid 3299 exited

<3>[ 281.126749] init: untracked pid 3304 exited

<3>[ 281.233732] init: untracked pid 3292 exited

<3>[ 281.244630] init: untracked pid 3287 exited

<3>[ 281.257806] init: untracked pid 3282 exited

<3>[ 281.291429] init: untracked pid 3297 exited

<3>[ 281.323614] init: untracked pid 3302 exited

<3>[ 281.345803] init: untracked pid 3307 exited

<4>[ 281.698901] tmpcap 13 cap 17 min_dis 45

<4>[ 282.698881] tmpcap 14 cap 17 min_dis 45

<4>[ 285.628873] set_dai_fmt 1

<4>[ 285.629148] srate 0

<6>[ 289.149458] qtaguid: ctrl_counterset(s 0 10078): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 289.426806] init: untracked pid 3377 exited

<3>[ 289.494696] init: untracked pid 3382 exited

<3>[ 289.714562] init: untracked pid 3380 exited

<3>[ 289.783100] init: untracked pid 3384 exited

<3>[ 290.178722] init: untracked pid 3412 exited

<3>[ 290.230055] init: untracked pid 3400 exited

<3>[ 290.305316] init: untracked pid 3405 exited

<3>[ 290.420993] init: untracked pid 3415 exited

<3>[ 290.434833] init: untracked pid 3426 exited

<3>[ 290.465101] init: untracked pid 3420 exited

<3>[ 290.485682] init: untracked pid 3402 exited

<3>[ 290.547348] init: untracked pid 3408 exited

<3>[ 290.589969] init: untracked pid 3437 exited

<3>[ 290.603351] init: untracked pid 3431 exited

<3>[ 290.691467] init: untracked pid 3423 exited

<3>[ 290.696814] init: untracked pid 3429 exited

<4>[ 290.698965] tmpcap 20 cap 17 min_dis 45

<3>[ 290.829816] init: untracked pid 3440 exited

<3>[ 290.870299] init: untracked pid 3434 exited

<3>[ 291.128563] init: untracked pid 3514 exited

<3>[ 291.159979] init: untracked pid 3508 exited

<3>[ 291.294554] init: untracked pid 3530 exited

<3>[ 291.308137] init: untracked pid 3524 exited

<3>[ 291.343574] init: untracked pid 3535 exited

<3>[ 291.371623] init: untracked pid 3518 exited

<3>[ 291.396232] init: untracked pid 3547 exited

<3>[ 291.401803] init: untracked pid 3512 exited

<3>[ 291.534045] init: untracked pid 3533 exited

<3>[ 291.547543] init: untracked pid 3527 exited

<3>[ 291.563244] init: untracked pid 3537 exited

<3>[ 291.631911] init: untracked pid 3550 exited

<4>[ 291.698949] tmpcap 11 cap 17 min_dis 5

<4>[ 292.493353] set_dai_fmt 1

<4>[ 292.493708] srate 0

<4>[ 292.699106] tmpcap 11 cap 17 min_dis 5

<4>[ 293.699004] tmpcap 12 cap 17 min_dis 5

<6>[ 294.486385] qtaguid: ctrl_counterset(s 1 10078): insufficient priv from pid=342 tgid=285 uid=1000

<4>[ 294.699285] tmpcap 14 cap 17 min_dis 45

<3>[ 295.331970] init: untracked pid 3623 exited

<3>[ 295.529854] init: untracked pid 3633 exited

<3>[ 295.541606] init: untracked pid 3628 exited

<3>[ 295.584153] init: untracked pid 3625 exited

<4>[ 295.698935] tmpcap 15 cap 17 min_dis 45

<3>[ 295.760153] init: untracked pid 3635 exited

<3>[ 295.840743] init: untracked pid 3631 exited

<3>[ 296.181757] init: untracked pid 3663 exited

<3>[ 296.342744] init: untracked pid 3668 exited

<3>[ 296.377940] init: untracked pid 3674 exited

<3>[ 296.414335] init: untracked pid 3689 exited

<3>[ 296.428684] init: untracked pid 3666 exited

<3>[ 296.430701] init: untracked pid 3684 exited

<3>[ 296.535621] init: untracked pid 3695 exited

<3>[ 296.564197] init: untracked pid 3706 exited

<3>[ 296.613587] init: untracked pid 3671 exited

<3>[ 296.617866] init: untracked pid 3681 exited

<3>[ 296.630241] init: untracked pid 3692 exited

<3>[ 296.655752] init: untracked pid 3687 exited

<4>[ 296.698979] tmpcap 15 cap 17 min_dis 45

<3>[ 296.755861] init: untracked pid 3700 exited

<3>[ 296.782318] init: untracked pid 3709 exited

<3>[ 297.461642] init: untracked pid 3780 exited

<3>[ 297.641036] init: untracked pid 3775 exited

<3>[ 297.679900] init: untracked pid 3785 exited

<3>[ 297.687947] init: untracked pid 3782 exited

<4>[ 297.698907] tmpcap 14 cap 17 min_dis 45

<3>[ 297.738150] init: untracked pid 3802 exited

<3>[ 297.795228] init: untracked pid 3790 exited

<3>[ 297.803856] init: untracked pid 3814 exited

<3>[ 297.864802] init: untracked pid 3777 exited

<3>[ 297.917989] init: untracked pid 3787 exited

<3>[ 297.958890] init: untracked pid 3812 exited

<3>[ 298.021244] init: untracked pid 3793 exited

<3>[ 298.035103] init: untracked pid 3817 exited

<4>[ 298.698925] tmpcap 14 cap 17 min_dis 45

<4>[ 299.698973] tmpcap 14 cap 17 min_dis 45

<4>[ 302.519022] rk610 standby 1

<4>[ 309.558776] set_dai_fmt 1

<4>[ 309.559150] srate 0

<3>[ 310.317142] init: untracked pid 3869 exited

<3>[ 310.469640] init: untracked pid 3889 exited

<3>[ 310.500328] init: untracked pid 3879 exited

<3>[ 310.506616] init: untracked pid 3874 exited

<3>[ 310.552765] init: untracked pid 3872 exited

<3>[ 310.572882] init: untracked pid 3910 exited

<3>[ 310.577214] init: untracked pid 3884 exited

<3>[ 310.614738] init: untracked pid 3903 exited

<3>[ 310.709726] init: untracked pid 3892 exited

<3>[ 310.725453] init: untracked pid 3882 exited

<3>[ 310.737833] init: untracked pid 3876 exited

<3>[ 310.803609] init: untracked pid 3915 exited

<3>[ 310.810952] init: untracked pid 3886 exited

<3>[ 310.834682] init: untracked pid 3906 exited

<6>[ 311.895712] qtaguid: ctrl_counterset(s 0 10078): insufficient priv from pid=342 tgid=285 uid=1000

<6>[ 313.062754] qtaguid: ctrl_counterset(s 1 10078): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 314.025436] init: untracked pid 3982 exited

<3>[ 314.130493] init: untracked pid 3987 exited

<3>[ 314.249034] init: untracked pid 3985 exited

<3>[ 314.472245] init: untracked pid 3989 exited

<3>[ 314.490257] init: untracked pid 4005 exited

<3>[ 314.658033] init: untracked pid 4011 exited

<3>[ 314.785684] init: untracked pid 4008 exited

<3>[ 314.831148] init: untracked pid 4016 exited

<3>[ 314.928116] init: untracked pid 4014 exited

<3>[ 315.021433] init: untracked pid 4021 exited

<3>[ 315.118283] init: untracked pid 4019 exited

<3>[ 315.174402] init: untracked pid 4041 exited

<3>[ 315.293053] init: untracked pid 4024 exited

<3>[ 315.430123] init: untracked pid 4083 exited

<3>[ 315.441531] init: untracked pid 4071 exited

<3>[ 315.447230] init: untracked pid 4048 exited

<3>[ 315.490665] init: untracked pid 4028 exited

<3>[ 315.507028] init: untracked pid 4053 exited

<3>[ 315.634004] init: untracked pid 4134 exited

<3>[ 315.649887] init: untracked pid 4141 exited

<3>[ 315.663236] init: untracked pid 4088 exited

<3>[ 315.677142] init: untracked pid 4074 exited

<3>[ 315.684991] init: untracked pid 4094 exited

<4>[ 315.698919] tmpcap 17 cap 17 min_dis 45

<3>[ 315.710400] init: untracked pid 4113 exited

<3>[ 315.717357] init: untracked pid 4033 exited

<3>[ 315.729255] init: untracked pid 4059 exited

<3>[ 315.881256] init: untracked pid 4137 exited

<3>[ 315.894390] init: untracked pid 4145 exited

<3>[ 315.911545] init: untracked pid 4101 exited

<3>[ 315.934925] init: untracked pid 4124 exited

<4>[ 316.698946] tmpcap 16 cap 17 min_dis 45

<4>[ 321.119622] rk610 standby 1

<4>[ 348.585187] set_dai_fmt 1

<4>[ 348.585564] srate 0

<6>[ 350.353227] qtaguid: ctrl_counterset(s 0 10078): insufficient priv from pid=342 tgid=285 uid=1000

<6>[ 352.776840] qtaguid: ctrl_counterset(s 1 10019): insufficient priv from pid=342 tgid=285 uid=1000

<4>[ 367.259323] rk610 standby 1

<4>[ 378.304736] set_dai_fmt 1

<4>[ 378.305029] srate 0

<6>[ 384.126001] qtaguid: ctrl_tag(t 52 18446742978492891136 10019): insufficient priv from pid=4281 tgid=557 uid=10017

<6>[ 384.461835] qtaguid: ctrl_tag(t 52 18446742978492891136 10019): insufficient priv from pid=4281 tgid=557 uid=10017

<4>[ 391.088926] rk610 standby 1

<4>[ 395.699255] battery reported 17

<4>[ 399.237546] set_dai_fmt 1

<4>[ 399.237929] srate 0

<6>[ 399.690999] qtaguid: ctrl_counterset(s 1 10101): insufficient priv from pid=342 tgid=285 uid=1000

<6>[ 400.226024] qtaguid: ctrl_counterset(s 0 10019): insufficient priv from pid=342 tgid=285 uid=1000

<4>[ 407.269066] rk610 standby 1

<3>[ 414.545023] init: untracked pid 2302 exited

<6>[ 424.257969] qtaguid: ctrl_counterset(s 1 10060): insufficient priv from pid=342 tgid=285 uid=1000

<6>[ 424.503501] qtaguid: ctrl_counterset(s 0 10060): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 429.874066] CFG80211-ERROR) wl_notify_scan_status : scan is not ready 

<6>[ 439.511400] qtaguid: ctrl_counterset(s 1 10038): insufficient priv from pid=342 tgid=285 uid=1000

<3>[ 439.731794] init: untracked pid 4392 exited

<3>[ 439.972483] init: untracked pid 4507 exited

<3>[ 440.108945] init: untracked pid 4523 exited

<3>[ 440.633418] init: untracked pid 4637 exited

<4>[ 441.513222] set_dai_fmt 1

<4>[ 441.513697] srate 0

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1386
128
2014/04/12 - 18:43
sp_Permalink sp_Print

No solution for RK903 wifi, yet. Sorry.

 

- Oma -

 

 

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1386
129
2014/04/12 - 18:45
sp_Permalink sp_Print

4WheelSpyder said

  Back camera fine camera app crashes when the front camera is selected.

Last try: http://crewrktablets.arctablet.com/?wpfb_dl=1681

 

- Oma -

 

Avatar
4WheelSpyder
Active Member
Forum Posts: 41
Member Since:
2014/03/08
sp_UserOfflineSmall Offline

Thanks Received: 1
130
2014/04/12 - 20:37
sp_Permalink sp_Print sp_EditHistory

Oma7144 said

Last try: http://crewrktablets.arctablet.com/?wpfb_dl=1681

 

Same symptoms - App loads but reports "Can't connect to the camera"

 

I should have reported this earlier but when I reboot I am getting two options

 

the first is to "Disable recovery flash"

 

and the second is  to "Fix Root (System/xbin/su)

 

I selected 'No' in both cases. I believe the second 'No' option is correct but I am not sure about the first.

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1386
131
2014/04/12 - 20:42
sp_Permalink sp_Print

Both is NO.

 

On which kernel do you? Found a later kernel Cube U9GT5 - 0A #151

 

- Oma -

Avatar
4WheelSpyder
Active Member
Forum Posts: 41
Member Since:
2014/03/08
sp_UserOfflineSmall Offline

Thanks Received: 1
132
2014/04/12 - 21:00
sp_Permalink sp_Print

Oma7144 said
Both is NO.

 

On which kernel do you? Found a later kernel Cube U9GT5 - 0A #151

 

- Oma -

I am running the 0A#66_visture kernel that I got from the Xoro Pad 9719QR ROM Posting. I tried the wei #592 kernel earlier with the KitKat ROM but it changed the blue colours to orange.

 

I will give #151 a go. (It is 30% smaller in size though)

Avatar
4WheelSpyder
Active Member
Forum Posts: 41
Member Since:
2014/03/08
sp_UserOfflineSmall Offline

Thanks Received: 1
133
2014/04/12 - 21:14
sp_Permalink sp_Print

Same Camera symptoms on kernel #151. Blue and Red are swapped same as on wei #592. Only notable difference is a small penguin instead of the U9GTV logo when powering up.  Have not tried any other features.

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1386
134
2014/04/13 - 19:47
sp_Permalink sp_Print sp_EditHistory

Here is a full high res KitKat build with kernel 0A #132:

Xoro PAD 9719QR by Oma KitKat build v2.3 & format_NAND_KK (MANDATORY, install via CWM)

Could you pls test on Cube U9GT5?

 

- Oma -

 

 

 

Avatar
arabi48
Active Member
Forum Posts: 48
Member Since:
2013/12/21
sp_UserOfflineSmall Offline
135
2014/04/13 - 20:58
sp_Permalink sp_Print

what about the ody iron!

Forum Timezone: Europe/Paris

Most Users Ever Online: 803

Currently Online:
198 Guest(s)

Currently Browsing this Page:
2 Guest(s)


Devices in use: Desktop (185), Phone (13)

Top Posters:

finless: 604

DarthJabba: 551

maikal: 394

mussonero1: 350

alex: 252

damo: 243

DanielVd: 237

Mark06: 222

Newest Members:

ppaofe

kabelodinternetu

waterwall

sufak79

ntukinal

Miguelcnc

Forum Stats:

Groups: 10

Forums: 185

Topics: 6037

Posts: 60500

 

Member Stats:

Guest Posters: 43

Members: 262194

Moderators: 5

Admins: 1

Administrators: admin

Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech


CrewRKTablets moderators: JochenKauz and Astralix