Forum switched to read-only as of 2020/06/01
| Latest product reviews |
|---|
 |
 |
Smartphones  |
TV Connect  |
 |
Register
Log In
HomeClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
 Please donate to support OMA and CrewRKTablets firmware work, thank you !
2014/01/19
Offline
So I did it! I only flashed the v134 system.img with the stock recovery and the Ionik- Kernel. Run and Check was OK and the tab booted nromally with the crewrktablets- writing! 
After the apps were optimized, there was a warning, that the process com.android.phone was finished!?!? I tried to click 20 times OK, but the window doesn't appear 
Moderator
Firmware Guru
2012/10/06
Offline
Apps optimized? Try again incl. eraseIDB.
- Oma -
The following users say thank you to Oma7144 for this useful post:
kapitaen02Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2014/01/19
Offline
Yes, apps were optimized. Now I tried again with a clean install - EraseIDB.
Flashed kernel, recovery and system again and - boot ended with Andoid and red triangle! I tried with rebooting, but the same result
Moderator
Firmware Guru
2012/10/06
Offline
EraseIDB will wipe the partition layout. So you need to flash all images.
Stopp for now and try again tomorrow.
- Oma -
The following users say thank you to Oma7144 for this useful post:
kapitaen02Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2014/01/19
Offline
OK, I didn't realize that the EraseIDB is wiping the whole partition layout I flash again all the images and will inform you tomorrow, oh later I mean 
Flash is still started...
This time the writing came while booting for a few minutes, the apps weren't opitmized and afterwards the same warning
I stop for today, you are right! Perhaps tomorrow more success
 Thank you for your support...
2014/01/19
Offline
Back again - give it a new try!
OK, I got it! 
 Yesterday it was perhaps really a little too late for this stuff!?!? I analyzed again the files I flashed yesterday. Therefore I recognized, that the boot.img was not the same one as in OMAs package! So I did another clean flash with the original boot.img and
TATA it works
The WiFi connects without problems and the performance seems to be very good!!! Thank you OMA and the other developers of Crew RKTablets for your good work and you OMA especially for your time you spent to solve my problem!
Now, by playing around, I found a few problems:
- My keyboard doesn't work
- screen blackout, when orientation changes
Perhaps anybody a result for these topics?
2014/01/21
Offline
Thank youÂ
Oma7144 said
Kernel YuanDao N70HD is now in the archive: http://crewrktablets.arctablet.com/?wpfb_dl=1422Â
- Oma -
Â
Â
2014/01/19
Offline
Another question again: Shall I install the FIXES in CWM, or is this not necessary?
Moderator
Firmware Guru
2012/10/06
Offline
Fine.
If anything works, no need for a fix.
You mean the hardware keyboard? What kind of keyborad is it?
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2014/01/19
Offline
It is the original one, that is delivered together with the tab. Sorry, can't paste the picture, so here is the link to the hp
http://www.i-onik.de/tablet_pcs_10.1_zoll
It is hardly connected to the tab an has a seperate battery in it, that reloads the tab. I thougt there would be no problem with the original kernel!? Wrong again... 
Moderator
Firmware Guru
2012/10/06
Offline
Hm, what is or what is not? When the keyboard is plugged what is shown under settings/input method?
Is the soft keyboard showing up or nothing? ....
- Oma -
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
Moderator
Firmware Guru
2012/11/19
Offline
One question, what modell do you own?
1. TP10.1-1500DC-dark grey-metal
2. TP10.1-1500DC-KB
Regards
JochenKauz
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
2014/01/19
Offline
I have the second one
2. TP10.1-1500DC-KB
and I will look this evening, what input method is listed under settings.
EDIT: I had a look in the setting list of the input methods. There is only the Android AOSP and Google Speech listed.
Another thins I recognized now: The keyboard has a accu inside and had loaded the tab with the firmware. Now the tab is not loaded and under settings/accu the second accu of the keyboard isn't listed! So the tablet- SW has no support for the docking interface inside, I think!?
Moderator
Firmware Guru
2012/11/19
Offline
Moved to correct forum.
Per aspera ad astra, we rock the Tablets !
If you like our firmwares, please consider making a donation to support our work.
Thank you!
Most Users Ever Online: 749
Currently Online:
69 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (61), Phone (8)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
country822
vovandolgan
kenjakenjavitis
Vugare
3nf
lesfurets
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix
