Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS
Smartphones
ARCHOS
TV Connect
ARCHOS 101 XS

A A A
Avatar

Please consider registering
Guest

Search

— Forum Scope —






— Match —





— Forum Options —





Minimum search word length is 3 characters - maximum search word length is 84 characters

Register Lost password?

ClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288

 Please donate to support OMA and CrewRKTablets firmware work, thank you !

sp_Feed sp_TopicIcon
cm10.1 tablet ntt528 8" rk3066
Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1378
16
2013/10/14 - 21:19
sp_Permalink sp_Print

Ok, we leave that for the moment.

Load CM10.1 from here: http://crewrktablets.arctablet.com/?wpfb_dl=993

Use the pack (from above) with the v1.35 RKAndroid-Tool. Load the parameter and all images from the CM10.1 pack and your kernel. Flash incl. eraseIDB.

- Oma -

The following users say thank you to Oma7144 for this useful post:

sebiks
Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
17
2013/10/15 - 08:17
sp_Permalink sp_Print sp_EditHistory

Oma7144 said
Ok, we leave that for the moment.

Load CM10.1 from here: http://crewrktablets.arctablet.com/?wpfb_dl=993

Use the pack (from above) with the v1.35 RKAndroid-Tool. Load the parameter and all images from the CM10.1 pack and your kernel. Flash incl. eraseIDB.

- Oma -

Thank you. There is some progress :) Before this CWM did not find sdcard. Now i could run backup from CWM but its stoped with error "Can't mount /data"

In CWM noticed missing /data and /cache parition. But i try manualy format and mount it in CWM with success.

I used format_NAND fix.

When i use "mount usb" in CWM. Noticed only one folder over  e: "clockworkmod"

 kernel.img and recovery.img in backup folder have difrent size then files in /rockdev/img folder

 ALso noticed no charging animation.

Tab still hungs at ntt logo

I think it's still a problem with the size of the partition in the  parameters file

 

My dmesg.log

<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.0.36+ (xmyxy@slave3) (gcc version 4.4.3 (GCC) ) #12 SMP PREEMPT Tue May 7 12:34:16 CST 2013
<4>[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: RK30board
<6>[    0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
<6>[    0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0>
<6>[    0.000000] memory reserve: Memory(base:0x90400000 size:8M) reserved for <camera_ipp_mem>
<6>[    0.000000] memory reserve: Total reserved 100M
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[    0.000000] bootconsole [earlycon0] enabled
<4>[    0.000000] CPU SRAM: copied sram code from c0c14000 to fef00010 - fef018d0
<4>[    0.000000] CPU SRAM: copied sram data from c0c158c0 to fef018d0 - fef02330
<6>[    0.000000] L310 cache controller enabled
<6>[    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
<4>[    0.000000] DDR DEBUG: version 1.00 20120903
<4>[    0.000000] DDR DEBUG: DDR3 Device
<4>[    0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
<4>[    0.000000] DDR DEBUG: init success!!! freq=336MHz
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
<4>[    0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[    0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
<4>[    0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<4>[    0.000000] rk30_iomux_init
<4>[    0.000000] Boot mode: 2 flag: 0xc3524203
<7>[    0.000000] On node 0 totalpages: 236544
<7>[    0.000000] free_area_init_node: node 0, pgdat c0c11e60, node_mem_map c16ad000
<7>[    0.000000]   Normal zone: 1744 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 195888 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 304 pages used for memmap
<7>[    0.000000]   HighMem zone: 38608 pages, LIFO batch:7
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @c1eb5000 s6944 r8192 d13536 u32768
<7>[    0.000000] pcpu-alloc: s6944 r8192 d13536 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 234496
<5>[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00230000 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00008000@0x0000a000(boot),0x00010000@0x00012000(recovery),0x00020000@0x00022000(backup),0x00040000@0x00042000(cache),0x00800000@0x00082000(userdata),0x00002000@0x00882000(kpanic),0x0012a000@0x00884000(system),-@0x009ae000(user) bootver=2013-06-21#1.34 firmware_ver=4.2.2
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 772MB 152MB = 924MB total
<5>[    0.000000] Memory: 915732k/915732k available, 132844k reserved, 155648K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
<5>[    0.000000]     vmalloc : 0xf7000000 - 0xfe800000   ( 120 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xf6800000   ( 872 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0408000 - 0xc04f2000   ( 936 kB)
<5>[    0.000000]       .text : 0xc04f2000 - 0xc0b8bab0   (6759 kB)
<5>[    0.000000]       .data : 0xc0b8c000 - 0xc0c13ca0   ( 544 kB)
<5>[    0.000000]        .bss : 0xc0c17024 - 0xc16ac210   (10837 kB)
<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:416
<4>[    0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
<6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.004957] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
<6>[    0.013878] pid_max: default: 32768 minimum: 301
<6>[    0.019048] Mount-cache hash table entries: 512
<6>[    0.024509] Initializing cgroup subsys debug
<6>[    0.029149] Initializing cgroup subsys cpuacct
<6>[    0.033985] Initializing cgroup subsys freezer
<6>[    0.038824] CPU: Testing write buffer coherency: ok
<4>[    0.144788] CPU1: Booted secondary processor
<6>[    0.144832] Brought up 2 CPUs
<6>[    0.152687] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
<6>[    0.159862] devtmpfs: initialized
<6>[    0.170806] NET: Registered protocol family 16
<4>[    0.175665] last_log: 0xefd00000 0xc0c1b2b8
<4>[    0.287466] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    0.398647] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<6>[    0.505440] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[    0.524277] console [ttyFIQ0] enabled, bootconsole disabled
<6>[    0.530404] Registered FIQ tty driver efc95c00
<4>[    0.530428] rk_board_id_probe:board id :0x2
<6>[    0.544865] bio: create slab <bio-0> at 0
<4>[    0.549068] wm831x_dcdc_init
<4>[    0.549267] wm831x_ldo_init
<5>[    0.549608] SCSI subsystem initialized
<6>[    0.549787] usbcore: registered new interface driver usbfs
<6>[    0.549879] usbcore: registered new interface driver hub
<6>[    0.552096] usbcore: registered new device driver usb
<4>[    0.552186] ts_register_slave:ft5306,id=1
<4>[    0.552198] ts_register_slave:gt8110,id=3
<4>[    0.552207] ts_register_slave:gt828,id=4
<6>[    0.552810] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
<6>[    0.553023] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
<6>[    0.553246] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
<6>[    0.553355] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
<6>[    0.553462] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
<6>[    0.612856] rk30-adc rk30-adc: rk30 adc: driver initialized
<4>[    0.719733] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    0.825837] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    0.931932] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.038037] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.144137] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.250242] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.356340] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.462438] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.568537] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.674640] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.780733] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.886837] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    1.992931] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    2.099034] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    2.205133] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<4>[    2.310192] regbase f7080000 0x0, otg_phy_confed08184, 0x408
<6>[    2.310274] rk30_adc_battery: driver initialized
<4>[    2.310473] timed-gpio: probe of timed-gpio failed with error -16
<6>[    2.310561] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    2.310976] Bluetooth: Core ver 2.16
<6>[    2.311035] NET: Registered protocol family 31
<6>[    2.311046] Bluetooth: HCI device and connection manager initialized
<6>[    2.311060] Bluetooth: HCI socket layer initialized
<6>[    2.311071] Bluetooth: L2CAP socket layer initialized
<6>[    2.311093] Bluetooth: SCO socket layer initialized
<6>[    2.311296] cfg80211: Calling CRDA to update world regulatory domain
<4>[    2.312112] rk fb probe ok!
<4>[    2.312207] wm831x_i2c_init
<3>[    2.312894] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 2...
<3>[    2.313536] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 1...
<3>[    2.314172] i2c i2c-1: No ack, Maybe slave(addr: 0x34) not exist or abnormal power-on, retry 0...
<3>[    2.314190] wm831x 1-0034: Failed to read parent ID: -11
<4>[    2.314208] wm831x: probe of 1-0034 failed with error -11
<4>[    2.352077] tps65910_pre_init,line=38
<6>[    2.355979] TPS65910 Set default voltage.
<4>[    2.358879] tps65910_pre_init,line=248
<4>[    2.422318] tps65910_post_init,line=256
<4>[    2.422331] tps65910_post_init:g_pmic_type=2
<4>[    2.435000] tps65910_post_init set vio vcc_io=3300000mV end
<4>[    2.436212] tps65910_post_init set vpll vdd11=2500000mV end
<4>[    2.437408] tps65910_post_init set vdig2 vdd11=1100000mV end
<4>[    2.438601] tps65910_post_init set vaux33 vcc_tp=3300000mV end
<4>[    2.439295] --------------disable vaux33 regulator----------
<4>[    2.442068] tps65910_post_init set vdd1 vdd_cpu=1200000mV end
<4>[    2.444840] tps65910_post_init set vdd2 vcc_ddr=1200000mV end
<4>[    2.446036] tps65910_post_init set vaux1 vcc25_hdmi=2500000mV end
<4>[    2.447228] tps65910_post_init set vaux2 vcca33=3300000mV end
<4>[    2.448420] tps65910_post_init set vdac vccio_wl=1800000mV end
<4>[    2.448532] tps65910_post_init,line=348 END
<4>[    2.448542] tps65910_i2c_probe:irq=324,irq_base=352,gpio_base=364
<6>[    2.458680] tps65910-rtc tps65910-rtc: rtc core: registered tps65910 as rtc0
<4>[    2.462409] tps65910_rtc_probe:ok
<4>[    2.462454] start_charge_logo_display
<4>[    2.462463] recovery mode
<6>[    2.462487] Switching to clocksource timer1
<6>[    2.464250] Switched to NOHz mode on CPU #0
<6>[    2.464824] Switched to NOHz mode on CPU #1
<4>[    2.469166] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf701c000
<4>[    2.469207] fb0:win1
<4>[    2.469210] fb1:win0
<4>[    2.469213] fb2:win2
<4>[    2.469225] set_lcd_info:board_id=2
<4>[    2.469364] lcdc0: dclk:64000000>>fps:59 rk30_load_screen for lcdc0 ok!
<4>[    2.495180] fb0:phy:90c00000>>vir:f8000000>>len:0xc00000
<4>[    2.495430] rk_fb_register>>>>>fb0
<4>[    2.495571] rk_fb_register>>>>>fb1
<4>[    2.495713] rk_fb_register>>>>>fb2
<4>[    2.495726] lcdc0 wakeup from stanby
<6>[    2.495736] lcdc0 win1 open
<4>[    2.519711] rk30 lcdc0 probe ok!
<4>[    2.519769] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf7028000
<4>[    2.519819] fb0:win1
<4>[    2.519823] fb1:win0
<4>[    2.519825] fb2:win2
<4>[    2.519879] lcdc1: dclk:74250000>>fps:60 rk30_load_screen for lcdc1 ok!
<4>[    2.519899] fb3:phy:90c00000>>vir:f8000000>>len:0xc00000
<4>[    2.520084] rk_fb_register>>>>>fb3
<4>[    2.520228] rk_fb_register>>>>>fb4
<4>[    2.520362] rk_fb_register>>>>>fb5
<4>[    2.520372] rk30 lcdc1 probe ok!
<4>[    2.520477] pwm_regulator_probe:n_voltages=17
<6>[    2.520618] pwm_regulator.0: driver initialized
<6>[    2.537048] NET: Registered protocol family 2
<6>[    2.537173] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    2.537501] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    2.539331] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[    2.540390] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    2.540402] TCP reno registered
<6>[    2.540414] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    2.540451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    2.540742] NET: Registered protocol family 1
<4>[    2.540922] RK29 Backlight Driver Initialized.
<6>[    2.541113] Unpacking initramfs...
<6>[    2.646871] Freeing initrd memory: 2240K
<6>[    2.647058] rk30-tsadc rk30-tsadc: initialized
<6>[    2.647145] PMU: registered new PMU device of type 0
<6>[    2.659119] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[    2.659135]     DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
<6>[    2.659287] Loaded driver for PL330 DMAC-2 rk29-pl330
<6>[    2.659300]     DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
<4>[    2.659935] highmem bounce pool size: 64 pages
<6>[    2.660097] ashmem: initialized
<6>[    2.665146] fuse init (API version 7.16)
<6>[    2.666763] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    2.666780] io scheduler noop registered
<6>[    2.666790] io scheduler deadline registered
<6>[    2.666846] io scheduler cfq registered (default)
<6>[    2.672874] rga: Driver loaded succesfully
<4>[    2.673526] rk_serial.c v1.2 2012-08-28
<6>[    2.673617] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
<6>[    2.702589] rk_serial rk_serial.0: membase 0xf704c000
<6>[    2.702645] rk_serial.1: ttyS1 at MMIO 0x10126000 (irq = 67) is a rk29_serial.1
<6>[    2.762560] rk_serial rk_serial.1: membase 0xf7050000
<6>[    2.762629] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
<6>[    2.792538] rk_serial rk_serial.3: membase 0xf7058000
<6>[    2.792823] Rockchip ion module(version: 1.0) is successfully loaded
<6>[    2.795322] loop: module loaded
<6>[    2.795365] Android kernel panic handler initialized (bind=kpanic)
<6>[    2.796042] PPP generic driver version 2.4.2
<6>[    2.796206] PPP Deflate Compression module registered
<6>[    2.796218] PPP BSD Compression module registered
<6>[    2.805799] PPP MPPE Compression module registered
<6>[    2.805814] NET: Registered protocol family 24
<6>[    2.805826] tun: Universal TUN/TAP device driver, 1.6
<6>[    2.805836] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    2.806070] usbcore: registered new interface driver asix
<6>[    2.806119] usbcore: registered new interface driver cdc_ether
<6>[    2.806163] usbcore: registered new interface driver dm9620
<6>[    2.806206] usbcore: registered new interface driver SR9700_android
<6>[    2.806250] usbcore: registered new interface driver net1080
<6>[    2.806292] usbcore: registered new interface driver cdc_subset
<6>[    2.806333] usbcore: registered new interface driver zaurus
<6>[    2.806363] cdc_ncm: 04-Aug-2011
<6>[    2.806406] usbcore: registered new interface driver cdc_ncm
<4>[    2.806417] Rockchip WiFi SYS interface (V1.00) ...
<6>[    2.806515] usbcore: registered new interface driver cdc_acm
<6>[    2.806526] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    2.806538] Initializing USB Mass Storage driver...
<6>[    2.806593] usbcore: registered new interface driver usb-storage
<6>[    2.806603] USB Mass Storage support registered.
<6>[    2.806706] usbcore: registered new interface driver usbserial
<6>[    2.806747] USB Serial support registered for generic
<6>[    2.806796] usbcore: registered new interface driver usbserial_generic
<6>[    2.806807] usbserial: USB Serial Driver core
<6>[    2.806843] USB Serial support registered for GSM modem (1-port)
<6>[    2.806895] usbcore: registered new interface driver option
<6>[    2.806905] option: v0.7.2:USB Driver for GSM modems
<6>[    2.806942] USB Serial support registered for Qualcomm USB modem
<6>[    2.806995] usbcore: registered new interface driver qcserial
<6>[    2.807032] USB Serial support registered for usi-modem
<6>[    2.807076] usbcore: registered new interface driver usi-modem
<3>[    2.813360] DVFS ERR:    dvfs_reset_volt (clk:vd_cpu), try to reload arm_volt! arm_volt_correct = 1200000
<6>[    3.019751] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[    3.019770] usb20_otg usb20_otg: DWC OTG Controller
<6>[    3.019838] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[    3.019878] usb20_otg usb20_otg: irq 48, io mem 0x00000000
<6>[    3.019886] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[    3.019926] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    3.019935] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    3.019943] usb usb1: Product: DWC OTG Controller
<6>[    3.019949] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
<6>[    3.019955] usb usb1: SerialNumber: usb20_otg
<6>[    3.020230] hub 1-0:1.0: USB hub found
<6>[    3.020243] hub 1-0:1.0: 1 port detected
<6>[    3.021770] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
<6>[    3.232094] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    3.232109] usb20_host usb20_host: DWC OTG Controller
<6>[    3.232145] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[    3.232168] usb20_host usb20_host: irq 49, io mem 0x00000000
<6>[    3.232204] DWC_OTG: Init: Port Power? op_state=1
<6>[    3.232209] DWC_OTG: Init: Power Port (0)
<6>[    3.232241] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    3.232249] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    3.232257] usb usb2: Product: DWC OTG Controller
<6>[    3.232263] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
<6>[    3.232269] usb usb2: SerialNumber: usb20_host
<6>[    3.232536] hub 2-0:1.0: USB hub found
<6>[    3.232556] hub 2-0:1.0: 1 port detected
<6>[    3.233644] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    3.233654] android_usb gadget: Number of LUNs=2
<6>[    3.233661]  lun0: LUN: removable file: (no medium)
<6>[    3.233668]  lun1: LUN: removable file: (no medium)
<6>[    3.233841] android_usb gadget: android_usb ready
<4>[    3.233848]  v1.0.5.0
<6>[    3.233895] usbcore: registered new interface driver esfp
<6>[    3.234055] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
<6>[    3.234234] usbcore: registered new interface driver xpad
<6>[    3.234275] usbcore: registered new interface driver usb_acecad
<6>[    3.234281] acecad: v3.2:USB Acecad Flair tablet driver
<6>[    3.234309] usbcore: registered new interface driver aiptek
<6>[    3.234316] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[    3.234322] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[    3.234350] usbcore: registered new interface driver gtco
<4>[    3.234356] GTCO usb driver version: 2.00.0006
<6>[    3.234382] usbcore: registered new interface driver hanwang
<6>[    3.234414] usbcore: registered new interface driver kbtab
<6>[    3.234420] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[    3.234453] usbcore: registered new interface driver wacom
<6>[    3.234459] wacom: v1.52:USB Wacom tablet driver
<4>[    3.234576] sensor_register_slave:kxtik,id=7
<4>[    3.234584] sensor_register_slave:mma8452,id=13
<4>[    3.234590] sensor_register_slave:lis3dh,id=4
<4>[    3.234596] sensor_register_slave:mma7660,id=14
<4>[    3.234611] sensor_register_slave:akm8975,id=17
<4>[    3.234671] sensor_register_slave:l3g4200d,id=30
<4>[    3.234679] sensor_register_slave:ls_isl29023,id=36
<6>[    3.234842] using rtc device, tps65910, for alarms
<6>[    3.235052] lirc_dev: IR Remote Control driver registered, major 250
<6>[    3.235061] IR NEC protocol handler initialized
<6>[    3.235066] IR RC5(x) protocol handler initialized
<6>[    3.235071] IR RC6 protocol handler initialized
<6>[    3.235076] IR JVC protocol handler initialized
<6>[    3.235081] IR Sony protocol handler initialized
<6>[    3.235086] IR RC5 (streamzap) protocol handler initialized
<6>[    3.235091] IR LIRC bridge handler initialized
<6>[    3.235096] Linux video capture interface: v2.00
<6>[    3.235563] device-mapper: uevent: version 1.0.3
<6>[    3.235748] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[    3.235832] Bluetooth: HCI UART driver ver 2.2
<6>[    3.235840] Bluetooth: HCI H4 protocol initialized
<6>[    3.235846] Bluetooth: HCILL protocol initialized
<6>[    3.235885] cpuidle: using governor ladder
<6>[    3.235891] cpuidle: using governor menu
<6>[    3.241150]
<6>[    3.241152] drivers/mmc/core/core.c...1824..  ===== mmc_rescan Begin....[mmc0]
<6>[    3.246272] rk29_sdmmc_change_clk_div..1956..  newDiv=83, newCLK=298Khz [sd_mmc]
<6>[    3.246356] .Line3945..The End of SDMMC-probe Ver.4.09 The last modify date is 2012-10-12.  [sd_mmc]
<6>[    3.246489] .Line3945..The End of SDMMC-probe Ver.4.09 The last modify date is 2012-10-12.  [sdio]
<4>[    3.246553] leds-gpio: probe of leds-gpio failed with error -16
<6>[    3.247659] usbcore: registered new interface driver usbhid
<6>[    3.247666] usbhid: USB HID core driver
<6>[    3.247928] logger: created 256K log 'log_main'
<6>[    3.248003] logger: created 256K log 'log_events'
<6>[    3.248060] logger: created 256K log 'log_radio'
<6>[    3.248115] logger: created 256K log 'log_system'
<4>[    3.248145] rk_sn_init.rksn_debug=0..ok
<6>[    3.248794] Codec driver version RT3261_V1.3.0, in fact you choose rt3224, no dsp!
<4>[    3.263346] read codec chip id is 0x5
<6>[    3.287324] asoc: rt3261-aif1 <-> rk29_i2s.0 mapping ok
<6>[    3.287928] asoc: rt3261-aif2 <-> rk29_i2s.0 mapping ok
<6>[    3.288396] ALSA device list:
<6>[    3.288402]   #0: RK29_RT3261
<6>[    3.288481] GACT probability NOT on
<6>[    3.288491] Mirror/redirect action on
<6>[    3.288497] u32 classifier
<6>[    3.288501]     Actions configured
<6>[    3.288507] Netfilter messages via NETLINK v0.30.
<6>[    3.288546] nf_conntrack version 0.5.0 (14343 buckets, 57372 max)
<6>[    3.288799] ctnetlink v0.93: registering with nfnetlink.
<6>[    3.288830] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    3.288837] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    3.289090] xt_time: kernel timezone is -0000
<6>[    3.289207] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.289313] arp_tables: (C) 2002 David S. Miller
<6>[    3.289351] TCP cubic registered
<6>[    3.289357] Initializing XFRM netlink socket
<6>[    3.289708] NET: Registered protocol family 10
<6>[    3.290184] Mobile IPv6
<6>[    3.290207] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.290298] IPv6 over IPv4 tunneling driver
<6>[    3.290802] NET: Registered protocol family 17
<6>[    3.290824] NET: Registered protocol family 15
<6>[    3.290940]
<6>[    3.290943] mmc_attach_sd..1219..  ===== Begin to identify card as SD-card. [mmc0]
<6>[    3.292052] Bluetooth: RFCOMM TTY layer initialized
<6>[    3.292063] Bluetooth: RFCOMM socket layer initialized
<6>[    3.292070] Bluetooth: RFCOMM ver 1.11
<6>[    3.292076] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    3.292083] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    3.292175] NET: Registered protocol family 35
<6>[    3.292305] [BT_RFKILL]: Enter rfkill_rk_init
<6>[    3.292387] [BT_RFKILL]: Request irq for bt wakeup host
<6>[    3.292405] [BT_RFKILL]: ** disable irq
<6>[    3.322526] [BT_RFKILL]: bt shut off power
<6>[    3.352565] [BT_RFKILL]: rk903_26M device registered.
<4>[    3.352614] ts_i2c_init
<6>[    3.364878] rk29_sdmmc_change_clk_div..1956..  newDiv=0, newCLK=49500Khz [sd_mmc]
<6>[    3.364977] mmc0: new high speed SD card at address b112
<6>[    3.365227] mmcblk0: mmc0:b112 SD01G 922 MiB
<6>[    3.366207]
<6>[    3.366209] msdos_partition..461... ==== Begin to parse sdcard-partition.  [mmc0]
<6>[    3.366219] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
<6>[    3.366227] msdos_partition..543... ==== partition-1, size=943104KB  [mmc0]
<6>[    3.366234] msdos_partition..571... ==== main partition-1....[mmc0]
<6>[    3.366241]  mmcblk0: p1
<6>[    3.366510] mmc_rescan_try_freq..1718..  ===== Initialize SD-card successfully. [mmc0]
<6>[    3.366526]
<6>[    3.366528] drivers/mmc/core/core.c...1824..  ===== mmc_rescan Begin....[mmc1]
<4>[    3.477392] ts_init_platform_hw set vaux33 vcc_tp=3300000mV end
<4>[    3.792543] ts_init_platform_hw
<4>[    3.792801] ft5306 touchscreen  init
<4>[    3.793051] [FST] Firmware version = 0x15
<4>[    3.793058] ts_chip_init:ft5306 devid:0x0
<6>[    3.793170] input: ft5306 as /devices/platform/rk30_i2c.2/i2c-2/2-0001/input/input1
<4>[    3.793307] ts_irq_init:use irq=306
<4>[    3.793317] ts_device_init:initialized ok,ts name:ft5306,devid=0
<4>[    3.793320]
<6>[    3.793583] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<4>[    3.794041] rk30-camera version: v0.2.21  Zoom by ipp
<4>[    3.794087] rk_sensor_io_init..hi253_back_1..powerdown pin(206) init failed
<4>[    3.794098] rk_sensor_io_init..ov5640_back_2..powerdown pin(206) init failed
<4>[    3.794109] rk_sensor_io_init..gc2035_back_3..powerdown pin(206) init failed
<4>[    3.794124] rk_sensor_io_init..hi704_front_1..powerdown pin(207) init failed
<4>[    3.794135] rk_sensor_io_init..ov2659_front_2..powerdown pin(207) init failed
<4>[    3.794145] rk_sensor_io_init..sid130B_front_3..powerdown pin(207) init failed
<4>[    3.794197] regulator_init_complete: VMMC: incomplete constraints, leaving on
<4>[    3.794445] regulator_init_complete: VDIG1: incomplete constraints, leaving on
<4>[    4.515225] Probe gt2005_back success
<3>[    4.622125] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 2...
<3>[    4.622457] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 1...
<3>[    4.622784] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 0...
<3>[    4.622794]
<3>[    4.622795]  hi253 write reg(0x1, val:0xf9) failed, try to write again!
<3>[    4.623131] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 2...
<3>[    4.623456] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 1...
<3>[    4.623778] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 0...
<3>[    4.623787]
<3>[    4.623789]  hi253 write reg(0x1, val:0xf9) failed, try to write again!
<3>[    4.624122] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 2...
<3>[    4.624446] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 1...
<3>[    4.624769] i2c i2c-3: No ack, Maybe slave(addr: 0x20) not exist or abnormal power-on, retry 0...
<3>[    4.624778]
<3>[    4.624779]  hi253 write reg(0x1, val:0xf9) failed, try to write again!
<3>[    4.624796] soft reset hi253 failed
<3>[    5.127431] camera 33-1-hi253_back_1: Probe hi253_back_1 failed
<3>[    5.231823] i2c i2c-3: 1 i2c clients have been registered at 0x3c
<3>[    5.234180] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
<3>[    5.234385] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
<3>[    5.234587] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
<3>[    5.234597]
<3>[    5.234598]  ov5640 write reg(0x3008, val:0x80) failed, try to write again!
<3>[    5.234811] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
<3>[    5.235012] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
<3>[    5.235213] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
<3>[    5.235222]
<3>[    5.235224]  ov5640 write reg(0x3008, val:0x80) failed, try to write again!
<3>[    5.235434] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
<3>[    5.235634] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
<3>[    5.235834] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
<3>[    5.235843]
<3>[    5.235845]  ov5640 write reg(0x3008, val:0x80) failed, try to write again!
<3>[    5.235862] soft reset ov5640 failed
<3>[    5.739125] camera 33-2-ov5640_back_2: Probe ov5640_back_2 failed
<3>[    5.843551] i2c i2c-3: 1 i2c clients have been registered at 0x3c
<3>[    5.845855] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
<3>[    5.846067] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
<3>[    5.846276] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
<3>[    5.846285]
<3>[    5.846287]  gc2035 read reg(0xf0 val:0xc0) failed, try to read again!
<3>[    5.846505] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
<3>[    5.846713] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
<3>[    5.846921] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
<3>[    5.846930]
<3>[    5.846932]  gc2035 read reg(0xf0 val:0xc0) failed, try to read again!
<3>[    5.847149] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
<3>[    5.847358] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
<3>[    5.847566] i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
<3>[    5.847575]
<3>[    5.847576]  gc2035 read reg(0xf0 val:0xc0) failed, try to read again!
<3>[    5.847593] read chip id high byte failed
<3>[    6.350863] camera 33-3-gc2035_back_3: Probe gc2035_back_3 failed
<4>[    7.066422] Probe gc0308_front success
<3>[    7.173227] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
<3>[    7.173558] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
<3>[    7.173882] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
<3>[    7.173892]
<3>[    7.173894]  hi704 write reg(0x1, val:0xf3) failed, try to write again!
<3>[    7.174228] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
<3>[    7.174552] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
<3>[    7.174875] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
<3>[    7.174884]
<3>[    7.174886]  hi704 write reg(0x1, val:0xf3) failed, try to write again!
<3>[    7.175218] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
<3>[    7.175541] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
<3>[    7.175864] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
<3>[    7.175873]
<3>[    7.175874]  hi704 write reg(0x1, val:0xf3) failed, try to write again!
<3>[    7.175891] soft reset hi704 failed
<3>[    7.678449] camera 33-5-hi704_front_1: Probe hi704_front_1 failed
<3>[    7.785125] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
<3>[    7.785292] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
<3>[    7.785453] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
<3>[    7.785463]
<3>[    7.785464]  ov2659 write reg(0x103, val:0x1) failed, try to write again!
<3>[    7.785634] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
<3>[    7.785794] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
<3>[    7.785955] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
<3>[    7.785964]
<3>[    7.785966]  ov2659 write reg(0x103, val:0x1) failed, try to write again!
<3>[    7.786136] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
<3>[    7.786296] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
<3>[    7.786456] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
<3>[    7.786465]
<3>[    7.786467]  ov2659 write reg(0x103, val:0x1) failed, try to write again!
<3>[    7.786484] soft reset ov2659 failed
<3>[    8.289754] camera 33-6-ov2659_front_2: Probe ov2659_front_2 failed
<3>[    8.897225] camera 33-7-sid130B_front_3: Probe sid130B_front_3 failed
<6>[    8.897398] input: rk_headsetdet as /devices/platform/rk_headsetdet.0/input/input2
<4>[    8.947647] In the headset_interrupt for read headset level  wake_lock headset_on_wake
<4>[    8.947674] (headset in is low level)headset status is in
<4>[    8.947681] headset->isMic = 0
<4>[    8.947729] headset notice android headset status = 2
<6>[    8.947859] i2c i2c-0: sensor_probe: gs_mma8452,0xefdb0600
<3>[    8.948118] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 2...
<3>[    8.948354] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 1...
<3>[    8.948588] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 0...
<3>[    8.948823] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 2...
<3>[    8.949056] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 1...
<3>[    8.949289] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 0...
<3>[    8.949523] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 2...
<3>[    8.949757] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 1...
<3>[    8.949990] i2c i2c-0: No ack, Maybe slave(addr: 0x1d) not exist or abnormal power-on, retry 0...
<4>[    8.949999] sensor_chip_init:fail to read gs_mma8452 devid:0xff
<3>[    8.950006] i2c i2c-0: sensor_probe failed -11
<4>[    8.950017] sensors: probe of 0-001d failed with error -11
<6>[    8.950032] i2c i2c-0: sensor_probe: gs_lis3dh,0xefdb0800
<3>[    8.950271] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 2...
<3>[    8.950505] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 1...
<3>[    8.950738] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 0...
<3>[    8.950973] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 2...
<3>[    8.951206] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 1...
<3>[    8.951440] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 0...
<3>[    8.951674] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 2...
<3>[    8.951906] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 1...
<3>[    8.952139] i2c i2c-0: No ack, Maybe slave(addr: 0x19) not exist or abnormal power-on, retry 0...
<4>[    8.952148] sensor_chip_init:fail to read gs_lis3dh devid:0xff
<3>[    8.952156] i2c i2c-0: sensor_probe failed -11
<4>[    8.952164] sensors: probe of 0-0019 failed with error -11
<6>[    8.952179] i2c i2c-0: sensor_probe: gs_kxtik,0xefdb0a00
<3>[    8.952417] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 2...
<3>[    8.952656] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 1...
<3>[    8.952895] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 0...
<3>[    8.953133] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 2...
<3>[    8.953370] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 1...
<3>[    8.953606] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 0...
<3>[    8.953843] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 2...
<3>[    8.954079] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 1...
<3>[    8.954316] i2c i2c-0: No ack, Maybe slave(addr: 0xf) not exist or abnormal power-on, retry 0...
<4>[    8.954324] sensor_chip_init:fail to read gs_kxtik devid:0xff
<3>[    8.954332] i2c i2c-0: sensor_probe failed -11
<4>[    8.954341] sensors: probe of 0-000f failed with error -11
<6>[    8.954356] i2c i2c-0: sensor_probe: gs_mma7660,0xefdb0c00
<4>[    8.954369] sensor_chip_init:gs_mma7660:devid=0x0,ops=0xc0bdf2a8
<6>[    8.955426] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-004c/input/input3
<4>[    8.962592] sensor_irq_init:use irq=304
<4>[    8.962695] sensor_misc_device_register:miscdevice: mma8452_daemon
<4>[    8.962704] sensor_probe:initialized ok,sensor name:mma7660,type:1,id=14
<4>[    8.962707]
<6>[    8.962727] i2c i2c-0: sensor_probe: ak8975,0xefdb0e00
<3>[    8.962977] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2...
<3>[    8.963214] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1...
<3>[    8.963449] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0...
<3>[    8.963684] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2...
<3>[    8.963918] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1...
<3>[    8.964152] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0...
<3>[    8.964388] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2...
<3>[    8.964622] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1...
<3>[    8.964855] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0...
<4>[    8.964864] sensor_chip_init:fail to read ak8975 devid:0xff
<3>[    8.964871] i2c i2c-0: sensor_probe failed -11
<4>[    8.964882] sensors: probe of 0-000d failed with error -11
<6>[    8.964899] i2c i2c-0: sensor_probe: l3g4200d_gryo,0xefdb1000
<3>[    8.965139] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2...
<3>[    8.965373] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1...
<3>[    8.965608] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0...
<3>[    8.965842] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2...
<3>[    8.966075] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1...
<3>[    8.966309] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0...
<3>[    8.966542] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2...
<3>[    8.966776] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1...
<3>[    8.967009] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0...
<4>[    8.967018] sensor_chip_init:fail to read l3g4200d_gryo devid:0xff
<3>[    8.967025] i2c i2c-0: sensor_probe failed -11
<4>[    8.967034] sensors: probe of 0-0069 failed with error -11
<6>[    8.967054] i2c i2c-2: sensor_probe: ls_isl29023,0xefdb1c00
<4>[    8.967062] sensor_chip_init:ls_isl29023:devid=0x0,ops=0xc0bdf508
<6>[    8.967775] input: lightsensor-level as /devices/platform/rk30_i2c.2/i2c-2/2-0044/input/input4
<4>[    8.967868] sensor_irq_init:use polling,delay=200 ms
<4>[    8.967948] sensor_misc_device_register:miscdevice: lightsensor
<4>[    8.967956] sensor_probe:initialized ok,sensor name:ls_isl29023,type:4,id=36
<4>[    8.967959]
<6>[    8.967992] sensor_init: Probe name sensors
<6>[    8.971204] tps65910-rtc tps65910-rtc: setting system clock to 2013-10-15 07:19:33 UTC (1381821573)
<6>[    8.971235] rt5623_i2c_probe(170)
<3>[    8.971668] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 2...
<3>[    8.972084] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 1...
<3>[    8.972499] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 0...
<4>[    8.972507] enter rt5623_off
<3>[    8.973084] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 2...
<3>[    8.973502] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 1...
<3>[    8.973938] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 0...
<3>[    8.974463] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 2...
<3>[    8.974884] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 1...
<3>[    8.975326] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 0...
<3>[    8.975745] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 2...
<3>[    8.976163] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 1...
<3>[    8.976582] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 0...
<3>[    8.976999] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 2...
<3>[    8.977416] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 1...
<3>[    8.977834] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 0...
<3>[    8.978252] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 2...
<3>[    8.978669] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 1...
<3>[    8.979086] i2c i2c-0: No ack, Maybe slave(addr: 0x1a) not exist or abnormal power-on, retry 0...
<6>[    8.979337] Freeing init memory: 936K
<4>[    8.993381] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[    8.994185] ipp irq 47
<4>[    8.994385] IPP init, version rk30-ipp 1.003
<3>[    8.994527] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.0.36+ SMP preempt mod_unload ARMv7 '
<4>[    9.006389] gp_rknand_info = : 0xeecef300
<4>[    9.006541] request IRQ_NANDC irq , ret=0.........
<4>[    9.006606] FlashCopyProgBuf1=0xc1550000
<4>[    9.006631] ATime: 40 ns AHB: 148 timming: 1081
<4>[    9.006641] No.1 FLASH INFO:ad de 94 da 74
<4>[    9.006652] No.3 FLASH INFO:ad de 94 da 74
<4>[    9.006962] ATime: 32 ns AHB: 148 timming: 1061
<4>[    9.007118] ATime: 32 ns AHB: 148 timming: 1061
<4>[    9.007125] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf01226c
<4>[    9.045155] GetRemapTbl...
<6>[   11.322533] DWC_OTG: dwc_otg_hcd_enable, disable host controller
<4>[   11.431625] done
<4>[   11.431658] FTL INFO:Version = 438,Date = 20121229
<4>[   11.431664] totalLogicBlkRaw  = 3943
<4>[   11.431676] gBootMedia = 1 gSdmmcFwPartOffset =0!
<4>[   11.431683] rknand_buffer.c version: 4.38 20121130!
<5>[   11.433518] 11 cmdlinepart partitions found on MTD device rk29xxnand
<5>[   11.433529] Creating 11 MTD partitions on "rk29xxnand":
<5>[   11.433539] 0x000000000000-0x000000400000 : "parameter"
<5>[   11.434516] 0x000000400000-0x000000800000 : "misc"
<5>[   11.435040] 0x000000800000-0x000001400000 : "kernel"
<5>[   11.435535] 0x000001400000-0x000002400000 : "boot"
<5>[   11.435961] 0x000002400000-0x000004400000 : "recovery"
<5>[   11.436343] 0x000004400000-0x000008400000 : "backup"
<5>[   11.436755] 0x000008400000-0x000010400000 : "cache"
<5>[   11.437228] 0x000010400000-0x000110400000 : "userdata"
<5>[   11.440576] 0x000110400000-0x000110800000 : "kpanic"
<6>[   11.441834] apanic: Bound to mtd partition 'kpanic'
<6>[   11.441842] apanic: No panic data available
<5>[   11.441854] 0x000110800000-0x000135c00000 : "system"
<5>[   11.442792] 0x000135c00000-0x0003d9c00000 : "user"
<4>[   11.451860] startBlk = 43  sysProtAddr = 42
<3>[   11.452753] rk30xxnand_ko: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.0.36+ SMP preempt mod_unload ARMv7 '
<6>[   11.452893] DWC_OTG: force_usb_mode_store 0->2
<3>[   11.453155] init: cannot open '/initlogo.rle'
<3>[   11.453483] android_usb: already disabled
<3>[   11.453714] init: Unable to open persistent property directory /data/property errno: 2
<3>[   11.455200] android_usb: already disabled
<6>[   11.458871] adb_open
<6>[   11.481258] rk30_lcdc_blank>>>>>4
<6>[   11.481264] rk30_lcdc_blank>>>>>4
<4>[   11.632533] rk_fb_lcd_enable
<6>[   11.662648] rk30_lcdc_blank>>>>>0
<6>[   11.662670] rk30_lcdc_blank>>>>>0
<4>[   11.822607] rk_fb_lcd_enable
<6>[   12.400050] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts:
<6>[   12.442426] EXT4-fs (mtdblock7): mounted filesystem with ordered data mode. Opts:
<4>[   12.492758] DWC_OTG: dwc_otg_pcd_ep_dequeue, bogus device state, c0bddbdc, speed 0
<6>[   12.493986] adb_release
<4>[   12.493998] DWC_OTG: dwc_otg_pcd_ep_dequeue, bogus device state, c0bddbdc, speed 0
<3>[   12.496981] init: untracked pid 90 exited
<6>[   12.500629] adb_open

 

Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
18
2013/10/15 - 22:35
sp_Permalink sp_Print

When i use parametars  16kb file and  use kernel,boot, and system from my backup. Everything is OK. Partition system has ~629MB.

Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
19
2013/10/17 - 09:29
sp_Permalink sp_Print sp_EditHistory

hello Oma.

I tried to use kernel.img from another device. I used the file RK30_kernel_308_pmp5880d_prestigio.7z from your thread http://forum.xda-developers.com/showthread.php?p=37909396.

 

System its now startet. But with graphic bug :(

There is something wrong with the kernel of ntt528.

I used the system multiwindow,and cm10.1

 

I have some idea. Original system.img from stock firmware have ext3 fs. Maybe ntt528 kernel don't  support ext4?

 

 

b5s6.JPGImage Enlarger

 

 nuin.jpgImage Enlarger


Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1378
20
2013/10/19 - 10:56
sp_Permalink sp_Print

This is a 3.0.8+ kernel. Screen and framebuffer handling is different.

Use the rk31 pack as is and change only the kernel. Do not flash the bootloader!!!

 

- Oma -

 

 

 

 

The following users say thank you to Oma7144 for this useful post:

sebiks
Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
21
2013/10/19 - 11:31
sp_Permalink sp_Print

This is a 3.0.8+ kernel. Screen and framebuffer handling is different. Use the rk31 pack as is and change only the kernel. Do not flash the bootloader!!!   - Oma -        

 

Kernel from Prestigio?

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1378
22
2013/10/19 - 11:32
sp_Permalink sp_Print

No the ntt528 kernel.

- Oma -

 

 

Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
23
2013/10/19 - 11:42
sp_Permalink sp_Print

Oma7144 said
No the ntt528 kernel.

- Oma -

 

 

tablet hangs on ntt logo. But not when i flash with kernel from prestigio.

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1378
24
2013/10/19 - 11:47
sp_Permalink sp_Print

Hm, what's wrong with that kernel?

Can you test with other 3.0.36+ kernel?

http://crewrktablets.arctablet.com/?p=1727

Just flash the kernel (tick only parameter & kernel).

- Oma -

 

 

Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
25
2013/10/19 - 11:52
sp_Permalink sp_Print

I have tried all. Unfortunately, without success. I think there is a problem with the screen resolution.

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1378
26
2013/10/19 - 11:55
sp_Permalink sp_Print

Ok, then test with the rk30 build and other 3.0.8+ kernel.

- Oma -

Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
27
2013/10/19 - 12:16
sp_Permalink sp_Print

Oma7144 said
Ok, then test with the rk30 build and other 3.0.8+ kernel.

- Oma -

OK I'll try. I even tried to compile my own kernel 3.0.36+ but this is difficult without kernel config file .config

 

Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
28
2013/10/19 - 12:35
sp_Permalink sp_Print

Oma7144 said
Ok, then test with the rk30 build and other 3.0.8+ kernel.

- Oma -

Flashed with cm10.1 1.3.2 and kernel 3.0.8+ from prestigio 5880d. System loaded OK but touchscreen not working.

Avatar
Oma7144

Moderator

Firmware Guru
Forum Posts: 6315
Member Since:
2012/10/06
sp_UserOfflineSmall Offline

Thanks Received: 1378
Avatar
sebiks
Regular Member
Forum Posts: 59
Member Since:
2013/10/14
sp_UserOfflineSmall Offline
30
2013/10/19 - 13:48
sp_Permalink sp_Print

Do you have any idea what could be wrong with the ntt kernel?

Forum Timezone: Europe/Paris

Most Users Ever Online: 749

Currently Online:
157 Guest(s)

Currently Browsing this Page:
1 Guest(s)


Devices in use: Desktop (101), Phone (55), Tablet (1)

Top Posters:

finless: 604

DarthJabba: 551

maikal: 394

mussonero1: 350

alex: 252

damo: 243

DanielVd: 237

Mark06: 222

Newest Members:

saradavis1

sinan8503

GsmProf

DS13

iyousaf

devikl

Forum Stats:

Groups: 10

Forums: 185

Topics: 6037

Posts: 60500

 

Member Stats:

Guest Posters: 43

Members: 262194

Moderators: 5

Admins: 1

Administrators: admin

Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech


CrewRKTablets moderators: JochenKauz and Astralix