CM10.1 on rk30board Beta Build v1.3.4 - Forum

Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS Smartphones
ARCHOS TV Connect
ARCHOS 101 XS

CM10.1 on rk30board Beta Build v1.3.4

brizx

Member

Forum Posts: 14

Member Since:
2013/07/02

Offline

2013/12/14 - 14:58

///…the firmware version 1.3.4 ( http://crewrktablets.arctablet.com/?p=1913) CUBE U30GT-H 32Gb when you rotate the tablet observed artifacts (stripes and dots). Sometimes is all well and good, but this is manifested again.

Oma7144

Moderator

Firmware Guru

Forum Posts: 6315

Member Since:
2012/10/06

Offline

Thanks Received: 1385

2013/12/14 - 16:47

Confirmed. This solution will give you a better overall performance.

However, you can change this:

- flash this boot.img http://crewrktablets.arctablet.com/?wpfb_dl=1290

- install this fix http://crewrktablets.arctablet.com/?wpfb_dl=1288

- Oma -

Per aspera ad astra, we rock the Tablets !

If you like our firmwares, please consider making a donation to support our work.
Thank you!

brizx

Member

Forum Posts: 14

Member Since:
2013/07/02

Offline

2013/12/14 - 19:16

Oh! Bad - installed the fix http://crewrktablets.arctablet.com/?wpfb_dl=1288 - the screen is light green with applying the labels download crewrktablets and you can't see...was Able to turn off only the long holding the button off. Installed the fix through CWM. But how do the installation boot.img http://crewrktablets.arctablet.com/?wpfb_dl=1290 Can I return everything back?

Oma7144

Moderator

Firmware Guru

Forum Posts: 6315

Member Since:
2012/10/06

Offline

Thanks Received: 1385

2013/12/14 - 19:20

You should have flashed the boot.img first.

Run RKAndroid-Tool and load the boot.img. Tick only parameter and boot.img. Then Run.

- Oma -

Per aspera ad astra, we rock the Tablets !

If you like our firmwares, please consider making a donation to support our work.
Thank you!

brizx

Member

Forum Posts: 14

Member Since:
2013/07/02

Offline

2013/12/14 - 21:26

Well. I reinstalled the system from scratch. I flashed boot.img artifacts disappeared! You also need to do to install this fix http://crewrktablets.arctablet.com/?wpfb_dl=1288 if everyone already well? After the firmware boot.img computer sees the external and internal card drive, USB debugging is enabled, the driver ADB installed - but now I can't go on the memory card! To install boot.img everything worked. What to do?

brizx

Member

Forum Posts: 14

Member Since:
2013/07/02

Offline

2013/12/14 - 21:47

Oh! Still had to install a fix , because artifacts appeared again. Now all is well! What to do with a USB connection? When connecting to a computer on the tablet icon appears only USB Debugging is enabled, and the icon notifications enable or disable the USB connection no. The computer sees both cards tablet external and internal, but I can't. What to do?

brizx

Member

Forum Posts: 14

Member Since:
2013/07/02

Offline

2013/12/15 - 06:12

Established PhabletUI. Now for a USB connection is established in the upper left corner. Notification appears and you can select "Enable USB - storage". Now became possible to work with memory cards on the computer. But there is a problem - the sound button disappeared, and the BACK button, HOME shifted to the middle and it is inconvenient to use the 10" screen. Give me please fix the volume buttons and the BACK button, HOME closer to the left side. By the way - your tooltip now on the device COMPLETELY disappeared artifacts rotate the screen. Thank you!