4.2.2 Cube U30GT-H internal SD card cannot be accessed via PC - Forum

Latest product reviews
ARCHOS 50 Diamond
ARCHOS GamePad2
ARCHOS Smartphones
ARCHOS TV Connect
ARCHOS 101 XS

4.2.2 Cube U30GT-H internal SD card cannot be accessed via PC

binny

Member

Forum Posts: 14

Member Since:
2013/01/20

Offline

2014/01/15 - 23:37

Hi,

I have tried all 6 combinations of USD Debugging on/off , Storage options of Mass Storage, Camera PTP, Media Device (MTP) .. unplugged and plugged back in the USB cable.

2 drives appear on Mass Storage mode on the PC as Removable Disk, but I cannot click into them . Get the error "Insert Disk..Please insert a disk into Removable Disk (H:)" on both drives.

Anyone have an idea of what else to try ? the internal card is fine on the tablet itself, just cannot access or copy to/from it using the usb cable. The cable works fine with my phone so cable is ok.

thanks

Binny

binny

Member

Forum Posts: 14

Member Since:
2013/01/20

Offline

2014/01/18 - 00:06

Anyone have an ideas on this please? any comments welcome thanks

cappybob

Regular Member

Forum Posts: 79

Member Since:
2013/05/23

Offline

Thanks Received: 8

2014/01/18 - 03:30

Binny

Have had this problem before, this worked for me. You will need to enter CWM on start up and look for your files (Zips) needed from download pack, Format nand fix and Intsd to nand fix. reinstall and reboot. Should fix your problem. Same for either AOSP or CM10.1, use the associated files with build.

Later CaPPyBoB

binny

Member

Forum Posts: 14

Member Since:
2013/01/20

Offline

2014/01/18 - 15:46

Hi CAppyBob

I did do this before, did it again, same problem. One one PC its recognised as 2 drives, neither of which I can access on the PC. On another PC , it flashes a drive letter and then it shows a Nexus device image with a big exclamation mark stating that there are no drivers. In either case I cannot access the internal card via PC.

Am I stuck ?

Binny

cappybob said
Binny

Have had this problem before, this worked for me. You will need to enter CWM on start up and look for your files (Zips) needed from download pack, Format nand fix and Intsd to nand fix. reinstall and reboot. Should fix your problem. Same for either AOSP or CM10.1, use the associated files with build.

Later CaPPyBoB