Forum switched to read-only as of 2020/06/01
|Latest product reviews|
Ok, looks good. Tab has Atheros wifi.
Just change the kernel in folder rockdev/Images and uncheck the loader before flash.
- Oma -
Every tab has it's own kernel (hardware abstraction layer). So, do not flash a strange firmware/kernel into the tab without having at least a backup of the kernel. Pls contact the retailer for the genuine firmware.
- Oma -
Hello Oma7144 and everyone else. Good job for all your work!
So, I have a rockchip tablet too. It's a 3026 and the model is m07r6. (It's sold as Turbo-X Rubik 7'' here in Greece.)
I install the 4.2.2 firmware and I replace the kernel.img with the one provided for m07r6 on the 2nd post.
It boots normally, but I have 2 problems:
1. Orientation is not working at all.
2. The touch is partially working. I touch the left side of the screen and the tablet feels like I'm touching the right side of the screen. When I touch the right side of the screen nothing happens. The same happens when I use TWRP.
Could you please help me?
ps. I cannot find the original firmware anywhere. Also, I didn't make a backup before flashing your custom rom. (my bad)
This is an approch to provide a generic build for older rk3026boards with RTL8188 wifi (no Bluetooth).
The build is done for ROVERPAD SKY C70 RSP TR7C and will also boot on tabs named R88 (thanks to oss85 for testing) -
You will find further kernel in post#2.
Oma TRC7 JB v1.1 (for tabs with rotations issues like Onn 07D)
– stock 4.2.41 recovery, CWM 188.8.131.52 recovery
– system ext4
– kernel guo #1
– internal storage 2,0 GB
– device spoofed as Nexus 7
– ethernet support
– init.d support
– gameloft compatible
– USB-Hub enabled
– gamepad compatible (PS2, XBox, …)
– kernel modules (cifs, tun, lan, serial, audio)
– latest hosts, su, su-binary, busybox
– Reboot Menue, sEFix, FX Sound
– Dateimanager HD (Root)
– Nova Launcher
Instructions are included in the download pack.
– higher performance > disable animation scales in developer options
– battery drain > set keep wi-fi on during sleep to never
– full access to the build > enable /system rw in File Manager HD
– don't show su notifications > disable in Superuser
- to prettify the build use Xposed Framework > Starter Pack
Be aware: it is your own risk!
- Oma -
hi guru, just want to ask your opinion if this firmware will work on my tablet(tenko T7X mid7526 )but the only thing is it it has a 1024x600pxls resolution ..if ever this custom rom of yours will not work on my tab ,please give me hints or suggestions to find the right firmware ...this is the full specs :
architecture :2xARM Cortex-A9@ 1.01GHz
clock speed :312mhz-1.01ghz
cpu 0 :816mhz
cpu 1 :816mhz
cpu load :
GPU vendor :ARM
GPU Renderer :mali-400mp
scaling govrnor :interactive
build ID :1310785-788-TenkoT7X-20131210
android vrsion :4.2.2
api lvl :17
java VM :dalvik 1.6.0
openGL ES :2.0
Kernel archt :armv7l
kernel vrsion :3.0.36+(eng.roger.20131210.111334)
screen size :11.23inchs
scrn rsolut'n(pxls) :1024x600
scrn dnsity :160pdi
total RAM :512mb
ntrnal storage : .98gb
root access :no
i flashed a wrong firmware on it so now it is completely dead ..
thanks and advance
Every tab has it's specific kernel. Without this kernel no chance to recover the tab. Pls ask the manufacturer for a firmware link.
- Oma -
hi Guru Oma , i tried searching for the Manufacturer but coudnt find ,. Iforgot to say that it was already rooted with iroot so the build prop of that tablet has already a stain/changed ..if ever i could not find the stock kernel of it ,will it be restored through using rooted kernels ? For add info : it has chips named gsl1680 and rtl8188 ..
thanks in advance ..
Doesn't work this way. A kernel (hardware abstraction layer) has to be compiled from source. So, never frash something strange into the tablet without having a fallback (stock firmware or a dump of the running firmware).
- Oma -
The following users say thank you to Oma7144 for this useful post:nielnamoc
I have this tablet http://www.manta.com.pl/en/mid901
Can I use this rom? I see I need to change kernel, which one will work with my device?
edit: My device is working on KitKat out of box.
- Oma -
Could be a driver issue. Anyway, you can do it on the tab. Hope it is already rooted.
Open a terminal and type:
logcat -d -v time >/mnt/sdcard/logcat.txt
cat proc/cmdline >/mnt/sdcard/cmdline.txt
cat proc/mtd > /mnt/sdcard/mtd.txt
dd if=/dev/mtd/mtd1 of=/sdcard/kernel.img bs=4096
dd if=/dev/mtd/mtd2 of=/sdcard/boot.img bs=4096
dd if=/dev/mtd/mtd3 of=/sdcard/recovery.img bs=4096
dd if=/dev/mtd/mtd9 of=/sdcard/system.img bs=4096
- Oma -
Sorry for making you wait, I had some problems with Internet connection. Here's zip with all txt and img files dumped.
Can you pls reboot the tab and do the dmesg again? I need to see the log from 0.0000000 sec.
- Oma -
Most Users Ever Online: 749
Currently Browsing this Page:
Devices in use: Desktop (189), Phone (14), Tablet (1)
Guest Posters: 43
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech