Hi All,

I had some problems with the "Newest CM 10.1/AOSP 4.2.2 Homebrew Kernel for RK2918 based Tablets".

Friday january 17, on my Arnova 9G2 I tried the following:

ROM CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714
Kernel kernel_308_arnova-an9g2_201401121843_JB422
Kernel kernel_308_arnova-an9g2_201312311046_JB422

In both cases the tablet started in blank status and Windows Device Manager says to me that it found a "Nexus".

After these not successfull tests I installed the following:

ROM CrewRKTablets_RK29_AOSP_4.2.2_r1_v1.3_20130714
Kernel kernel_308_9g2_arnova

In this case the Tablet started but CWM was not the touch version so I could not apply fixes (format_nand etc.).

Saturday January 18, I tried the following:

ROM CrewRKTablets_RK29_Loox_CM10.1_4.2.2_v1.2.4
Kernel kernel_308_arnova-an9g2_201401121843_JB422
Kernel kernel_308_arnova-an9g2_201312311046_JB422

In both cases the tablet started in blank status and Windows Device Manager says to me that it found a "Pascal2".

After these not successfull tests I installed the following:

ROM CrewRKTablets_RK29_Loox_CM10.1_4.2.2_v1.2.4
Kernel kernel_308_9g2_arnova

In this case the Tablet started, CWM was the touch version so I applied fixes (format_nand etc.).
The problem is that the Loox version of the rom is plenty of sw I don't really need (Nova e Trebuchet) and it gives me the sensation is particularly heavy for the low HW dotation of this Tablet.

Do you think it's possible to have a good AOSP with the correct CWM and a overclocked processor homebrew kernel for the Arnova 9G2?

Thank you in every way for the nice job you do for the community!!!
Tore