GekkeVos said
Great Help, but the Procedure for entering Flashing/download mode on the Arnova 9 G2 is not correct.. U must Press and Hold both 'Menu' & 'Pwr' buttons, then press reset button for several seconds. Screen remains blank and the host PC will indicate New hardware found. Then install your drivers.#

Hope this helps.

I know this is an old post but I am the proud new owner of an Arnova 9 G2 and this is the first reply that has said, yes, just the menu and reset buttons do not work.

HOWEVER, I am still unable to get the 9-G2 to stay off and have the RBT recognize the 9-G2.

I am using Win 7, 64b. It is VERY possible I'm not doing something I'm supposed to do(being a tablet flashing newbie). I've followed the instructions as closely as possible and tried the trouble shooting tips. I've tried with the 9-G2 on first and off first. I've tried removing the driver from my devices. I've tried hitting reset first and then menu, pwr and any combination of the three. I've tried pulling my hair out.

All to no avail.

Any help is appreciated.

~Bob