| Latest product reviews |
|---|
 |
 |
Smartphones  |
TV Connect  |
 |
Register
Log In
HomeClockworkMod (CWM) Recovery easy install for RK3066 and RK3188 -- TWRP/CWM Flash-Tool and root for RK3288
Please donate to support OMA and CrewRKTablets firmware work, thank you !
2012/10/28
Offline
http://www.family-lippmann.de/an10dg3/ with root
The following users say thank you to doman75 for this useful post:
alvess, Griller_GT, lambaotrung, eee291, madmisser, alex18, kekedou, Stylesau, DerBerliner2012/11/30
Offline
what is the easyiest way to flash this to an 10d g3, rockchip flasing tool dont worked... give me an advice.
The following users say thank you to chatuiesc for this useful post:
cetan
Moderator
Firmware Guru
2012/01/05
Offline
the arnova 10d g3 can not be flashed with rockchip batch tools, because it does not have a rochip processor
2012/12/01
Offline
chatuiesc said
what is the easyiest way to flash this to an 10d g3, rockchip flasing tool dont worked... give me an advice.
Unzip to empty sdcard, shutdown your tablet, put sdcard in and start. updates alone at boot.
2012/12/05
Offline
franky384 said
chatuiesc said
what is the easyiest way to flash this to an 10d g3, rockchip flasing tool dont worked... give me an advice.Unzip to empty sdcard, shutdown your tablet, put sdcard in and start. updates alone at boot.
Can't you do like this?
How to update the software of your Arnova
1. Download the update file for your device « an10dg3.zip ». You can save it to the desktop of your computer for example.
2. Connect the USB cable to your Arnova and your computer so that the ARNOVA is seen as an external hard drive (as normal).
3. Copy the « an10dg3.zip » to the root of the device. Do not place it into any folder of the Arnova, just to the root level of the device.
4. Unplug your device safely as usual using the green « disconnect safely » arrow in the system tray.
5. Once disconnected, go to “Settings” application on your tablet, then “About tablet” and finally go to “System update”. Then, you just have to follow the instructions on the screen and select the firmware “an10dg3.zip”. Your product will restart. You must then go though the installation wizard. Not only will this process allow you to configure the basic settings of your player.
6. IMPORTANT: to ensure that your product is fully updated; please carry out in factory data rest. To do this, you just have to go “settings” > “Backup & Reset” > and select “Factory data reset”.
Warning: This will erase all data from your tablet’s internal storage, including your Google account, system and apps data & settings and downloaded applications.
2012/12/01
Offline
To alvess:
I don`t think so, the files in the ZIP are different From the Original Firmware, havent tried.
2012/12/06
Offline
Hello,
First I'm french, so sorry with my poor english...
I've installed the FW provided by doman 75, so it works fine and the metro theme is beautiful.
everything works except the youtube video in the native web browser (it worked with the original FW...)
but With Opera Utube Videos are OK.
Dash,
The following users say thank you to dashmaxi for this useful post:
alvess2012/12/05
Offline
dashmaxi said
Hello,
First I'm french, so sorry with my poor english...
I've installed the FW provided by doman 75, so it works fine and the metro theme is beautiful.
everything works except the youtube video in the native web browser (it worked with the original FW...)
but With Opera Utube Videos are OK.
Dash,
Did you use the SD card method to install the firmware?
Br alvess
2012/12/06
Offline
Yes I've used MicroSD card ton install it.
First rooted with Rootburner via MicroSD card then install doman's FW still with the Micro SD.
Dash
The following users say thank you to dashmaxi for this useful post:
alvess2012/12/05
Offline
To doman75.
Thanks a million! 
For the first time this product becomes usable, even the Google play store works with this custom firmware.
Easy to install:
1.Unpack the an10dg3.zip.
2.Copy the catalog "FirmwareInstall" to the root of an micro sd card.
3.Copy the file "wmt_scriptcmd" to the root of the same micro sd card.
4.Turn off the Arnova Tablet, put in the micro sd card.
5.Connect the Arnova Tablet to a power outlet.
6.Turn on the Arnova Tablet and the installation starts automaticly
7.Take out the micro sd card when the instructions on the tablet says so, it will reboot.
8.Profit! 
Br alvess
The following users say thank you to alvess for this useful post:
madmisser2012/12/06
Offline
question
can but back to the Arnova firmware ?
Settings> About tablet> System Update> Select the upgrade package to install> The upgrade package's path> Browser> and it finds the original Arnova zip
is listed on the menu ?
can outsource the apps on the local SD (apps2sd) ?
Settings> Apps> ON SD CARD> and you can move the dan then ?
2012/12/06
Offline
tekilakos said
question
can but back to the Arnova firmware ?
Settings> About tablet> System Update> Select the upgrade package to install> The upgrade package's path> Browser> and it finds the original Arnova zip
is listed on the menu ?can outsource the apps on the local SD (apps2sd) ?
Settings> Apps> ON SD CARD> and you can move the dan then ?
Path is present but original.zip is not present anymore due to the fact it is not an Arnova anymore but an eken...
to go back on original fw, you have to put on sd card the fw available on arnovatech
As the tab is rooted youu can push on sd card apps via apps2sd.
What do u mean by "dan"?
Dash
The following users say thank you to dashmaxi for this useful post:
tekilakos2012/12/06
Offline
dashmaxi said
tekilakos said
question
can but back to the Arnova firmware ?
Settings> About tablet> System Update> Select the upgrade package to install> The upgrade package's path> Browser> and it finds the original Arnova zip
is listed on the menu ?can outsource the apps on the local SD (apps2sd) ?
Settings> Apps> ON SD CARD> and you can move the dan then ?Path is present but original.zip is not present anymore due to the fact it is not an Arnova anymore but an eken...
to go back on original fw, you have to put on sd card the fw available on arnovatech
As the tab is rooted youu can push on sd card apps via apps2sd.
What do u mean by "dan"?
Dash
sorry for ( dan )
that was a translation error 
2012/12/06
Offline
let me back on what I said:
to go back on original fw, you have to put on sd card the fw available on arnovatech --> it does not work
Could U tell me how to re install the original FW, after an installation of doman's FW?
thanks,
Dash
2012/12/06
Offline
dashmaxi said
let me back on what I said:to go back on original fw, you have to put on sd card the fw available on arnovatech --> it does not work
Could U tell me how to re install the original FW, after an installation of doman's FW?
thanks,
Dash
this is the methode for flashing orginal arnova firmware
How to update the software of your Arnova
1. Download the update file for your device « an10dg3.zip ». You can save it to the desktop of your computer for example.
2. Connect the USB cable to your Arnova and your computer so that the ARNOVA is seen as an external hard drive (as normal).
3. Copy the « an10dg3.zip » to the root of the device. Do not place it into any folder of the Arnova, just to the root level of the device.
4. Unplug your device safely as usual using the green « disconnect safely » arrow in the system tray.
5. Once disconnected, go to “Settings” application on your tablet, then “About tablet” and finally go to “System update”. Then, you just have to follow the instructions on the screen and select the firmware “an10dg3.zip”. Your product will restart. You must then go though the installation wizard. Not only will this process allow you to configure the basic settings of your player.
6. IMPORTANT: to ensure that your product is fully updated; please carry out in factory data rest. To do this, you just have to go “settings” > “Backup & Reset” > and select “Factory data reset”.
Warning: This will erase all data from your tablet’s internal storage, including your Google account, system and apps data & settings and downloaded applications.
can but back to the Arnova firmware ?
Settings> About tablet> System Update> Select the upgrade package to install> The upgrade package's path> Browser> and it finds the original Arnova « an10dg3.zip »
Most Users Ever Online: 749
Currently Online:
102 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Devices in use: Desktop (92), Phone (10)
Top Posters:
finless: 604
DarthJabba: 551
maikal: 394
mussonero1: 350
alex: 252
damo: 243
DanielVd: 237
Mark06: 222
Newest Members:
roroL14
rodrigo14
gerry3818
jaga1986
Piotrassss
mgsppt
Forum Stats:
Groups: 10
Forums: 185
Topics: 6037
Posts: 60500
Member Stats:
Guest Posters: 43
Members: 262194
Moderators: 5
Admins: 1
Administrators: admin
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech
CrewRKTablets moderators: JochenKauz and Astralix
