Hi pacinoallstars,

I am interested in a fresh dump of your untouched table !

My own AN10bG2 is no more usable after a bad flash (from AN10G2).

Maybe I can help you to dump your untouched tablet ?

All you need is a working linux and the rkflashtool tool.

rkflashtool:

Sources of rkflashtool can be found here as explained in ArcTablet Wiki here

Then you had to compile it for your linux. It depends on libusb1.0.0 librairy.

Use your linux package manager to install the developpment version (on Ubuntu command line: sudo apt-get install libusb1.0.0-dev)

Compile it with "gcc -o rkflashtool rkflashtool.c -lusb-1.0 -O2 -W -Wall -s"

Now you have a working rkflashtool on your computer !

After we must know the content of your tablet by reading the "parameter" area to confirm data sent by Rich here.

Finally we will use rkflashtool to extract all part from your tablet.

These parts will be resent to your broken tablet with the same tool.

Tell me if you are interested !