Hi all,

 

I understand this must be a bloody noob question but I just cannot take it anymore.

 

If I use my 32gb thumb drive to copy over some photos or files, and then I want to eject the USB drive, what do I do,????

At the moment I have been going to the top of the screen where it shows the USB icon, dragging that down and then opting to eject the usb drive, the 10G2 says something about "make sure that eject has been selected" or words to that effect, I then press on okay and it says its safe to unplug..... But it cant be, the usb card is still lit, and every time i pull it out it ends up corrupting one of my folders.

I'm sure I've been through just about every setting possible and I cannot seem to find anything else about the usb, all I could find was to "safely eject SD card, and also to erase Card and nand"  nothing in here listed under USB.

there must be an easy way to do this, but i'll beef hooked if I can find it.

any help please chaps, I cant suffer loosing any more info from my usb drives.

 

sadsack.