Forum switched to read-only as of 2020/06/01
|Latest product reviews|
your recovery is not working(missing)
you should get the tablet in fastboot mode( bootloader), the screen it will be black, but you can check if the arnova is fastboot withe the command
123981236123arnova fastboot (something like this should appear if you have your tablet in fastboot)
This might be helpful. If I turn it on holding +, it goes to the recovery menu and shows this error:
Can't open E:/cache/recovery/command
Really appreciate all the help so far. 🙂
You need to push reset and Volume +, please read the Rockchip flashing page carefully
If you like our web site, applications and firmwares, feel free to support our site. Donations are used to pay the bills for our server hosting costs, development tools and purchase new tablets to support.
@globula_neagra Unfortunately the problem is that my computer no longer recognises that the device is connected, so I doubt that I can connect to it with the Android SDK.
@admin I am very sure I've done this as described, both with the tablet connected via USB and not (just to be sure)
In case anyone is interested in the resolution of this particular story, there has been no progress in resolving the tablet's issues. I think I've learned my lesson, which is not to buy another Archos device. I've flashed other devices plenty of times, but never had anything like these problems.
I'll be eBaying my brick at the weekend. 🙂
Sad to hear that...
From how much you will start the bid ? 🙂
I hope you haven't eBayed your 'brick' yet because it might well not be as bricked as you suspect.
Look on here for Finless Bob's 1.1 Firmware. Read the READ-ME very carefully. Follow those instructions to the letter and your drivers issue will go away. I had the same problem as you - at least in its first manifestation - and once I went back to the instructions, rather than relying on my memory, it all fell into place.
If you can't find the READ-ME post here and I will paste the text you need this evening.
The following users say thank you to Ayrton for this useful post:rayhan619
I also had the exact same issue that you had and after trying to find one of Finless Bob's driver update pages thanks to Ayrton's suggestion I did find a key step that I missed before that caused me to have your same issue (kept listing it at Arnova 10g2 or something instead of unknown device) but the key is to hold down the + key and after pressing the reset button about 2 seconds to let go of the reset while holding the + and make sure the screen stays black and then plug in the USB device. Before I had the USB already in and pressed both and it would turn black and then show Arnova like the problem you had.
The following users say thank you to jameslovesjesus for this useful post:rayhan619
I had the exact issue as the original poster and could not figure out how to fix it from the instruction. However, like jameslovesjesus says if you "hold down the + key and after pressing the reset button about 2 seconds to let go of the reset while holding the + and make sure the screen stays black and then plug in the USB device" it should fix the problem. I then used Rockchip batch tool V1.5 to upgrade to the original firmware from the website.
THANK YOU SO VERY MUCH!!!
maybe stupid question but i dont get it... do i need first to shutdown the tablett then press + then reset etc or do i need to start the tablett then + -- reset ? i cannot fix the calibration problem after update with the custom FW i get everytime after start the calibration option and everything its just crazy
i am having trouble to get all the software i have downloaded to pic up my Arnova 10 G2 tablet.
i cant get it into any reboot or flash mode to install the software. i have tried to use the + volume and hold reset but nothing.
i have downloaded all the latest RK batch tool v1.7 as advised on the walkthrough on here but still noting i have followed the how to flash as well but it all comes back to the same problem i cant get into the mode where i can upload the data.
please can someone advise or even contact me to offe a walk through via skype, phone, email or anything.
all i am aiming to do is to update my laptop and put on the andriod jelly bean operating system
Most Users Ever Online: 749
Currently Browsing this Page:
Devices in use: Desktop (134), Phone (12)
Guest Posters: 43
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech