|Latest product reviews|
Ok, so before i ask all my questions, let me explain what I've done so far. I first got the tab brand new, and loaded it all with the custom firmware kasty-arn10bg3-40-042
It worked perfectly. It was amazing. However, I tried to restore the factory settings due to selling it, and it is now stuck on the calibration screen. So i reloaded the custom firmware. Now it is stuck on the calibration screen for that as well.
My tab is the arnova 10.1'' Capacitive Multitouch Display. ARM Cortex A8 @ 1 ghz
I'm a little confused, seeing as how it worked perfectly before. If anyone has any help please reply. Need to get this working so i can sell for an emergency trip. Thanks everybody.
I have an Arnova 10 1b, and i have the same problem. After factory reset, the same simptoms appeared.
I tried to update to a more recent official firmware, but the tablet still gets locked in a loop in the calibration screen. I tried to let the battery unload completely, and then load it again but this does not work.
From the "calibration status: calibration sucessfull" screen goes to the "Finish calibration: Do not touch the screen", to the "Calibration: touch paint already to do the calibration. Do not touch the screen during calibration." screen and back to the beginning, and that's until the battery runs dry.
Any help would be greatly appreciated.
Most Users Ever Online: 749
Currently Online: Joeblah
Currently Browsing this Page:
Devices in use: Desktop (119), Phone (10), Tablet (1)
Guest Posters: 43
Moderators: globula_neagra, exelletor, JochenKauz, Oma7144, cracktech